Instruction/ maintenance manual of the product SP-CEIL-012 InFocus
Go to page of 14
IN-SPECEI L012.R2 INSTALLATION MANUAL SP-CEIL-012 InFocus Corpo ration 27700B S.W. Parkway Ave. Wilsonville, OR 97070-9215 1-800-294-6400 www.infocus.com.
PBL-110 Projector Mount Page - 2 - Installation Manual.
SP-CEIL-012 Installation Manual Page - 3 - Table of Contents Warning Statements ............................................................................................................. ............................... - 4 - Parts List ............
SP-CEIL-012 Page - 4 - Installation Manual Warning Statements WARNING: THE CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LE AST FIVE (5) TIMES THE WEIGHT OF THE PROJECTOR. IF NOT, TH E CEILING MUST BE REINFORCED. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SE RVICE TECHNICIAN, AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST BE ADHER ED TO.
SP-CEIL-012 Installation Manual Page - 5 - Parts List NOTE: This mount is shipped with all proper install ation hardware and components. Make sure that none of these parts are missing and/or damaged before be ginning installation.
SP-CEIL-012 Page - 6 - Installation Manual Ceiling and Wall Installation Unpack the Gyrolock ® and review any WARNING statements that apply to the installation. Select the desire d location for the Gyrolock ® . There are three mounting points for a single stud installation and four mounting points for a solid structure installation.
SP-CEIL-012 Installation Manual Page - 7 - Adjustable Height 1. Screw the fully threaded nipple all the way into th e secured top plate. Use the jam screw (supplied) to secure the pipe (Figure 2). 2. Screw the PBC coupling all the way onto the threaded nipple or (optional) 1-1/2" pipe and secure the M6 x 12 Phillip screw (Figure 3).
SP-CEIL-012 Page - 8 - Installation Manual Adjustments and Extension Arm SP-EXTARM-01 SP-EXTARM-02 SP-EXTARM-03 SP-EXTARM-04 Contact InFocus for extensions. Adjustments • Roll & pitch greater than ± 20 ° from center. • Quick positive release with positive security lock.
SP-CEIL-012 Installation Manual Page - 9 - Mount Installation 1. Invert the projector and place it on a soft and fl at surface. Locate the three (3) 6 (mm) mounting points found on the bottom of the projector. 2. Secure the mounting bracket using the three (3) 6 (mm) x 12 (mm) Phillip Head screws (supplied).
SP-CEIL-012 Page - 10 - Installation Manual 1. Install the two (2) conical spacers and two (2) flat washers two, (2) hinge pin screws loosely on both sides of the base box. 2. Raise the projector with the mounting bracket attached and slip though the hinge pin slots openings on the bracket into the base box.
SP-CEIL-012 Installation Manual Page - 11 - Troubleshooting Procedures QUESTION: My projector mount must be set at an angle to be viewed properly on the wall, but the projector will not hold at this position. Why is this? ANSWER: The angle adjustments are not tight; they must be tightened.
SP-CEIL-012 Page - 12 - Installation Manual Technical Specifications 4.50 4.50 6.75 6.00 Figure 5. Technical Dimensions.
SP-CEIL-012 Installation Manual Page - 13 - Warranty Limited Lifetime Warranty All products carry a limited lifetime warranty fr om ship date against defects in materials and workmanship. InFocus Corporation is not liable for improper installation that results in damage to mounts, adapters, dis play equipment or personal injury.
SP-CEIL-012 Page - 14 - Installation Manual IN-SPECEI L012.R2 Notes InFocus Corpo ration 27700B S.W. Parkway Ave. Wilsonville, OR 97070-9215 1-800-294-6400 www.
An important point after buying a device InFocus SP-CEIL-012 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought InFocus SP-CEIL-012 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data InFocus SP-CEIL-012 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, InFocus SP-CEIL-012 you will learn all the available features of the product, as well as information on its operation. The information that you get InFocus SP-CEIL-012 will certainly help you make a decision on the purchase.
If you already are a holder of InFocus SP-CEIL-012, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime InFocus SP-CEIL-012.
However, one of the most important roles played by the user manual is to help in solving problems with InFocus SP-CEIL-012. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device InFocus SP-CEIL-012 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
