Instruction/ maintenance manual of the product Swan 6011 American Standard
Go to page of 4
IN WALL PRESSURE BALANCING BATH AND SHOWER SETS To assure proper positioning in relation to wall, note roughing-in dimensions. Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin.
3 INSTALL HANDLE ADJUST HOT LIMIT STOP By restricting HANDLE rotation and limiting the amount of hot water allowed to mix with the cold, the HOT LIMIT SAFETY STOP (1) reduces risk of accidental scalding. To set the maximum hot water temperature of your faucet, all you need to do is adjust the setting on the HOT LIMIT SAFETY STOP (1).
5 Remove handle SET SCREW, remove HANDLE, unscrew HANDLE SCREW and remove ADAPTER. Remove two SCREWS holding ESCUTCHEON and remove ESCUTCHEON. Remove COVER by pulling straight out. Shut off water supply by either closing off main water supply, or closing off the hot and cold CHECK STOPS on valve.
A954440-0070A CARTRIDGE 023603-0070A CARTRIDGE SCREWS A923611-0070A HOT LIMIT STOP M961854-0070A FIXATION RING WITH SCREWS M952100-0070A PRESSURE BALANCING UNIT M962304-YYY0A SHOWER ARM AND ESCUTCHEON.
An important point after buying a device American Standard Swan 6011 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Standard Swan 6011 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Standard Swan 6011 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Standard Swan 6011 you will learn all the available features of the product, as well as information on its operation. The information that you get American Standard Swan 6011 will certainly help you make a decision on the purchase.
If you already are a holder of American Standard Swan 6011, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Standard Swan 6011.
However, one of the most important roles played by the user manual is to help in solving problems with American Standard Swan 6011. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Standard Swan 6011 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
