Instruction/ maintenance manual of the product Standard 4210 American Standard
Go to page of 4
SINGLE CONTROL KITCHEN PULL-OUT FAUCET Installation Instructions Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin.
M968461B 2 MAKE WATER SUPPLY CONNECTIONS Turn off hot and cold water supplies before beginning. 1 2 COLD HOT RED TAG RED Connect FLEXIBLE SUPPLIES (1, 2) directly to wall supplies. Connection on fitting supplies are 3/8" compression. Connect left supply to Hot (Marked with a Red Tag) and right supply to Cold wall supply.
M968461B CHECK CONNECTIONS FOR LEAKS. Move HANDLE down into "off" position. Turn on water supplies and check connections for leaks . Operate HANDLE (2) up and down, left and right to flush water lines thoroughly. Operate HAND SPRAY and check connections for leaks.
M968461B MODEL NUMBERS M962301-0070A INTERNAL BOD Y AND SEAL M901142-YYY0A BOD Y 023529-0070A CARTRIDGE 023527-0070A CARTRIDGE SCREWS 050448-0070A WEIGHTS M962302-0020A SPRAY HOSE AND SEAL M962299--YY.
An important point after buying a device American Standard Standard 4210 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Standard Standard 4210 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Standard Standard 4210 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Standard Standard 4210 you will learn all the available features of the product, as well as information on its operation. The information that you get American Standard Standard 4210 will certainly help you make a decision on the purchase.
If you already are a holder of American Standard Standard 4210, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Standard Standard 4210.
However, one of the most important roles played by the user manual is to help in solving problems with American Standard Standard 4210. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Standard Standard 4210 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
