Instruction/ maintenance manual of the product Retrospect Washstand 9422.020 American Standard
Go to page of 3
730804-100 Product names listed herein are trademarks of American Standard Inc. © American Standard Inc. 2003 ASSEMBLY & INSTALLATION INSTRUCTIONS 9422.020 RETROSPECT WASHSTAND - 1 - Recommended Tools & Materials Thank you for selecting our products.
730804-100 WASHSTAND ASSEMBLY 1 2 3 4 - 2 - Thread the two legs with tapered upper ends into the threaded holes at the front of the cabinet. Thread the remaining legs into the two holes at the rear of the cabinet. Hand-tighten each of the four legs. Note: If replacing an existing sink be certain to shut off water supply before removing old sink.
730804-100 - 3 - B C 5 Connect the trap to drain assembly hand tight to check alignment. It may be necessary to cut off part of the tailpiece (area "B") or part of the horizontal leg of the trap (area "C"). Connect hot and cold supply lines between the fitting valve and the supply shut-off valves.
An important point after buying a device American Standard Retrospect Washstand 9422.020 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Standard Retrospect Washstand 9422.020 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Standard Retrospect Washstand 9422.020 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Standard Retrospect Washstand 9422.020 you will learn all the available features of the product, as well as information on its operation. The information that you get American Standard Retrospect Washstand 9422.020 will certainly help you make a decision on the purchase.
If you already are a holder of American Standard Retrospect Washstand 9422.020, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Standard Retrospect Washstand 9422.020.
However, one of the most important roles played by the user manual is to help in solving problems with American Standard Retrospect Washstand 9422.020. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Standard Retrospect Washstand 9422.020 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
