Instruction/ maintenance manual of the product IDTM Indesit
Go to page of 12
DISHWASHER EN IDTM Contents Installation, 2-3-4 Positioning and levelling Connecting the water and electricity supplies Technical data Description of the appliance, 5 Overall view Control panel Loadin.
2 EN Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it.
3 EN Connecting the water outlet hose Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 4 cm. Alternatively, rest it over a sink or tub; the free end of the hose should not remain immersed in water.
4 EN Electrical Connection If your appliance is supplied with a 13 amp. fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instruction below. Warning Warning Warning Warning Warning :this appliance must be earthed.
5 EN Overall view 1. Upper rack 2. Upper sprayer arm 3. Tip-up compartments 4. Rack height adjuster 5. Lower rack 6. Lower sprayer arm 7. Cutlery basket 8. Washing filter 9. Salt dispenser 10. Detergent and rinse aid dispensers 11. Data plate * Only available in selected models.
6 EN stops ( see figure ). If the rack is equipped with the click clack handles* ( see figure ), pull them upwards or downwards to adjust the height. Loading examples for the upper rack Loading examples for the lower rack Just you Tip-up compartments** These special tip-up compartments can be used to arrange mugs and cups.
7 EN Starting the dishwasher 1. Turn the water tap on. 2. Press the ON/OFF button: the indicator light will illuminate. 3. Open the door and pour in a suitable amount of detergent (see below). 4. Load the racks (see Loading the racks) and shut the door.
8 EN Wash cycle table Note To make it easier to measure out the detergent, it is worth remembering that: 1 tablespoon = 15 grams of powder = approximately 15 ml of liquid 1 teaspoon = 5 grams of powde.
9 EN Only use products that have been specifically designed for dishwashers. Do not use table salt or industrial salt. I f using a multi-functional product (2-in-1, 3-in-1, 4-in-1) it is not necessary to add rinse aid; however, we recommend that you add salt, especially if you live in an area where the water is hard or very hard.
10 EN Shutting off the water and electricity supplies • Turn off the water tap after every wash cycle to avoid leaks. • Remove the plug from the socket when cleaning the machine and when carrying out maintenance work.
11 EN The appliance was designed and manufactured in compliance with current international safety standards. The following information has been provided for safety reasons and should therefore be read carefully. General safety • The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use.
12 EN Whenever the appliance fails to work, check for a solution from the following list before calling for Technical Assistance Centre. Troubleshooting Malfunction: The dishwasher does not start. No water enters the dishwasher. No water drains out from the dishwasher.
An important point after buying a device Indesit IDTM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Indesit IDTM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Indesit IDTM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Indesit IDTM you will learn all the available features of the product, as well as information on its operation. The information that you get Indesit IDTM will certainly help you make a decision on the purchase.
If you already are a holder of Indesit IDTM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Indesit IDTM.
However, one of the most important roles played by the user manual is to help in solving problems with Indesit IDTM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Indesit IDTM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
