Instruction/ maintenance manual of the product SM-6200 Impex
Go to page of 29
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruction Parts List Warranty Ordering Parts Model SM-6200 Retain This Manual for Reference 08-06-09 OWNER'S MANUAL MARCY DELUXE SMITH MACHINE SM-6200 IMPEX ® INC.
TABLE OF CONTENTS BEFORE YOU BEGIN..................................................................................... 1 IMPORTANT SAFET Y NOTIC ES.................................................................... 2 SMITH MACHINE HA RDWARE PAC K….
PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In par ticular, note the following safety precautions: 1.
The w arning labels show n here have been placed on the Cross Brace, Rear Stabilizer and Upper Frame. If the labels are missing or illegibl e, please call customer service at 1-800-888-8899 for replacements.
4.
SMITH MACHINE HARDWARE PACK 5.
SMITH MACHINE HARDWARE PACK 6.
SMITH MACHINE ASSEMBLY INSTRUCTION Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury. STEP 1 (See Diagram 1) A.
DIAGRAM 1 8.
STEP 2 (See Diagram 2) A.) Attach the Vertical Frame Base (#9) to the Cross Brace (#6) from the bottom. Attach the Rear Vertical Frame (#8) ont o the Cross Brace on the top. Align the holes and secure them together with two M10 x 2 3/8” Carriage Bolts (#83), Ø ¾” Washers (#89), and M10 Aircraft Nuts (#90).
STEP 3 (See Diagram 3) A.) Attach the Weight Glide Post (#11) to the bracket on the Vertical Frame Base (#9). Secure it with one 3 1/8” x 1 ¾” Bracket (#31), M10 x 2 ½” Carriage Bolt (#84), Ø ¾” Washer (#89), and M10 Aircraft Nut (#90) to the upper hole, one M10 x 2 ½” Allen Bolt (#81) and one Ø ¾” Washer (#89) to the lower hole.
DAIGRAM 3 11.
STEP 4 (See Diagram 4) A.) Attach the Butterfly Base (#37) to the Rear Vertical Frame (#8). Secu re it with two M10 x 2 ½” Carriage Bolts (#84), Ø ¾” Washers (#89), and M10 Aircraft Nuts (#90). B.) Attach two Swivel Pulley Brackets (#35) to the open brackets on the Rear Vertical Frame (#8).
CABLE LOOP DIAGRAM 13.
STEP 5 (See Diagram 5 & Cable Loop Diagram) A.) Attach the 142” Upper Cable (#40) to the fr ont opening on the Upper Frame (#7). Attach a Pulley (#59) to the opening. Secure it wit h one M10 x 2 1/8” Allen Bolt (# 79), two Ø 1 1/8” x 3/8” Pulley Bushings (#52), and one M10 Aircraft Nut (#90).
STEP 6 (See Diagram 6 & Cable Loop Diagram) A.) Attach one end of the 86” Butterfly Cable (#42) to the clip on the Right Butterfly (#39). Draw the Cable to the right open Swivel Pulley Bracket (#35). B.) Attach a Small Pulley (#58) to the Swivel Pu lley Bracket.
STEP 7 (See Diagram 7 & Cable Loop Diagram) A.) Insert the tip of the 127” Lower Cable (#41) through the opening on the Foot Plate (#26) to the opening on the Vertical Frame Base (#9). B.) Attach a Small Pulley (#58) to the opening. A ttach the Foot Plate to the Frame.
DIAGRAM 7 17.
STEP 8 (See Diagram 8) A.) NOTE: Help of another person is strongly recommended for this step. Place the Lifting Sleeve (#13) in between the two Safety Stop Fr ames (#16).
SMITH CAGE EXPLODED DIAGRAM 19.
SMITH CAGE PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Base Frame 2 51 Ø 1” x 5/8” Pulley Bushing 2 2 Front Vertical Frame 2 52 Ø 1 1/8” x 3/8” Pulley Bushing 2 3 Left Vertical Frame 1 53 Ø 1.
MULTI-PURPOSE BENCH HARDWARE PACK 21.
MULTI-PURPOSE BENCH ASSEMBLY INSTRUCTION Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended that this machine be assembled by two or more people to avoid possible injury. STEP 1 (See Diagram 1) A.
STEP 2 (See Diagram 2) A.) Align the bracket on the Backrest Adjustment Support (#6) in between the two Backrest Supports (#12). Secure it with four M8 x 1 5/8” Allen Bolts (#40), eight Ø 5/8” Washers (#45), and four M8 Aircraft Nuts (#48). Do not tighten the Nuts and Bolts yet .
STEP 3 (See Diagram 3) A.) Place the Seat Pad (#17) onto Seat Bracket (#5). Secure it wit h four M8 x 1 3/8” Allen Bolts (#41) and Ø 5/8” Washers (#45). B.) Attach the Backrest Board (#16) to the two Backrest Supports (#12). Secure it with four M8 x 1 3/8” Allen Bolts (#41) and Ø 5/8” Washers (#45).
STEP 4 (See Diagram 4) A.) Attach the Leg Developer (#4) to the open bracket on the Leg Developer holder on Main Frame (#1). Secure it with an Axle (#15), two M10 x 5/8” Allen Bolts (#35), and two Ø ¾” Washers (#44). B.) Insert two Foam Tubes (#13) halfway thr ough the holes on the Leg Developer.
26.
MULTI-PURPOSE BENCH PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Frame 1 2 Left Rear Stabilizer 1 3 Right Rear Stabilizer 1 4 Leg Developer 1 5 Seat Bracket 1 6 Backrest Adjustment Support 1 7 Arm Cur.
IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defec ts in workmanship and material, under normal use and service conditions, for a period of two years on t he Frame from the date of purchase. This warranty extends only to the original purchaser.
An important point after buying a device Impex SM-6200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Impex SM-6200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Impex SM-6200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Impex SM-6200 you will learn all the available features of the product, as well as information on its operation. The information that you get Impex SM-6200 will certainly help you make a decision on the purchase.
If you already are a holder of Impex SM-6200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Impex SM-6200.
However, one of the most important roles played by the user manual is to help in solving problems with Impex SM-6200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Impex SM-6200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
