Instruction/ maintenance manual of the product NS-1101U Impex
Go to page of 20
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Pack Assembly Instruction Parts List Warranty Ordering Parts Model NS-1101U Retain This Manual for Reference 120315 ASSEMBLY & OWNER'S MANUAL Magnetic-Resistance Upright Bike NS-1101U IMPEX ® INC.
TABLE OF CONTENTS BEFORE YO U BEGIN ...................................................................................…. 1 IMPORTANT SAF ETY NOTIC ES..................................................................…. 2 WARNING LABEL PLACEMENT…………………………………………………….
© IMPEX INC. www.impex-fitness.com 2 IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equi pment. Be sure to read the entire manual before you assemble or operate your machine.
WARNING LABEL PLACEMENT The Warning Labels and Caution Label shown here have been placed on the Rear Stabilizer. If the labels are missing or illegible, please call cust omer service at 1-800-999-8899 for replacement. Apply the labels in location shown.
HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size. NO. DESCRIPTION IDENTIFIER Q’TY 7 Spacer 1 20 M8 x 3” Allen Bolt 4 16 Ø ¾” Curved Washer 4 21 Ø ½” Lock Washer 4 5 M5 x 1” Philips Screw 1 8 T-shaped Lock knob 1 Allen wrench 1 Crossing wrench 1 © IMPEX INC.
COMPONENTS FOR ASSEMBLY © IMPEX INC. www.impex-fitness.com 5.
ASSEMBLY INSTRUCTION Tools Required For Assembling the Machine: One Crossing Wrench and Allen Wrench, provided by manufacturer. NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury. STEP-1 A.) Attach the Front Stabilizer (#19) to the Main Fram e (#26).
STEP 2 A.) Thread the Left Pedal (#27) count erclockwise into the Crank (#28). B.) Thread the Right Pedal (#25) clockwise into the Crank (#28). © IMPEX INC.
STEP 3 A.) NOTE: Extra help may be needed to hold the Front Post (#4) while connecting the cables and wires. B.) Remove the four M8 x ¾” Allen Bolts (#15) and four Ø ¾” Curved Washers (#16) pre-installed by factory from Front Post (#9). Slide the Fr ont Cover (#18) onto the Front Post (#9).
STEP 4 A.) Attach the Handle (#2) to the Front Post (#9). B.) Insert the two Pulse Sensor Wires (#3) thr ough the open slot on Front Post and then pull up and out of the Front Post. C.) Clamp the Handle to the Front Post. Secure it with T-shaped Lock Knob (#8), Spacer (#7), and the Clamp Cover (#6).
STEP 5 A.) Connect the Middle Computer Wire (#4) to the computer wire. B.) Connect the two Pulse Sensor Wires (#3) to the sensor wire from Computer (#1). C.) Slide the Computer onto the Fr ont Post (#9). Secure it with one M5 x 1” Philips Screw (#5).
STEP 6 A.) Insert the Seat Post (#14) into the Main Frame (#26). Use the Quick Release Knob (#24) to securely lock the Seat in position. B.) Remove M5 x 5/8” Philips Scre w (#10) pre-installed by factory from Front Post (#9). Attach the Water Bottle Rack (#11) to Front Post (#9) .
STEP 7 A.) Attach the Seat (#13) onto the Seat Post (#14). Secure the Seat with pre-installed round bracket, bolt, and nuts underneath the Seat. B.) Place the Water Bottle (#12) into the Water Bottle Rack (#11).
EXPLODED DIAGRAM © IMPEX INC. www.impex-fitness.com 13.
© IMPEX INC. www.impex-fitness.com 14 PARTS LIST PART NO. DESCRIPTION SPEC. QUANTITY 1 Computer 1 2 Handle 1 3 Pulse Sensor Wire 2 4 Middle Computer Wire 1 5 Philips Screw M5 x 1” 1 6 Clamp Cover 1.
© IMPEX INC. www.impex-fitness.com 15 CARE, MAINTENANCE AND STORAGE 1. Inspect and tighten all parts each time you use the machine. Replace any worn parts immediately. 2. The bike can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents.
COMPUTER Set Up Time and Date 1. To set up time and date; remove batteries for few seconds, and then place batteries back. The computer will beep and display “8888” and then display Time/Date field. 2. Press “MODE” key to enter the Time or Date field.
EXERCISE GUIDELINES Using your MAGNETIC BIKE will provide you with several benefits, it will improve your physical fitness, tone muscle and in conjunction with calo rie controlled diet help you lose weight. 1. The Warm Up Phase This stage helps get the blood flowing around t he body and the muscles working properly.
© IMPEX INC. www.impex-fitness.com 18 3. The Cool Down Phase This stage is to let your Cardio-vascular System and muscles wind down. This is a repeat of the warm up exercise e.
© IMPEX INC. www.impex-fitness.com 19 IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase.
An important point after buying a device Impex NS-1101U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Impex NS-1101U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Impex NS-1101U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Impex NS-1101U you will learn all the available features of the product, as well as information on its operation. The information that you get Impex NS-1101U will certainly help you make a decision on the purchase.
If you already are a holder of Impex NS-1101U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Impex NS-1101U.
However, one of the most important roles played by the user manual is to help in solving problems with Impex NS-1101U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Impex NS-1101U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
