Instruction/ maintenance manual of the product NS-1003U Impex
Go to page of 18
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Pack Assembly Instruction Parts List Warranty Ordering Parts Model NS-1003U Retain This Manual for Reference 110518 ASSEMBLY & OWNER'S MANUAL Magnetic-Resistance Upright Bike NS-1003U IMPEX ® INC.
TABLE OF CONTENTS BEFORE YO U BEGIN ...................................................................................…. 1 IMPORTANT SAF ETY NOTIC ES..................................................................…. 2 WARNING LABEL PLACEMENT…………………………………………………….
© IMPEX INC. 2 IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equi pment. Be sure to read the entire manual before you assemble or operate your machine.
WARNING LABEL PLACEMENT The Warning Labels and Caution Label shown here h ave been placed on the Rear Stabilizer, Main Frame. If the labels are missing or illegible, please call cust omer service at 1-800-999-8899 for replacement. Apply the labels in location shown.
HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size. No. Description Identifier Q’ty 15 Carriage Bolt M8 x 2 3/8” 4 16 Curved Washer Ø 5/8” 8 17 M8 Acorn Nut 4 18 Allen Bolt M8 x 5/8“ 4 26 T-shaped Lock Knob 1 #6 Allen Wrench 1 Crossing Wrench 1 © IMPEX INC.
COMPONENTS FOR ASSEMBLY ASSEMBLY INSTRUCTION Tools Required For Assembling the Machine: One Crossing Wrench and Allen Wrench, provided by manufacturer. NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury.
STEP-1 A.) Do not tighten Bolts until instructed to do so. B.) Attach the Front Stabilizer (#2) to the Main Fram e (#1). Secure it with two M8 x 2 3/8” Carriage Bolts (#15), two Ø 5/8” Curved Washers (#16), and two Acorn Nuts (#17). C.) Attach the Rear Stabilizer (#3) to the Main Fram e (#1).
C.) Pull the tension connector from the Upper Tens ion Cable (#20) and slide in between the opening on the connector on the Lower Tension Cable (#23) . Pull the Upper Tension Cable upward and slide the wire through the slot on the bracket. D.) Drop down the Upper Tension Cable so t he fitting sits firmly on top of the bracket.
A.) Attach the Handle (#5) to the Front Post (#4). Secure it with one Bracket (#30), one M8 x ¾” Allen Bolt (#19), and one T-shaped Lock Knob (#26). B.) Connect Upper Computer Wire (#28) from Computer (#6) to the Middle Computer Wire (#21) from Front Post.
A.) Remove the three Ø 5/8” Washers (#12), three Ø 5/8” Lock Washers (#13), and three M8 Aircraft Nuts (#14) from the Seat (#8). B.) Attach the Seat to the Seat Post (#7). Secu re it with three Ø 5/8” Washers (#12), three Ø 5/8” Lock Washers (#13), and three M8 Aircraft Nuts (#14).
A.) Thread the Left Pedal (#9) counter clockwise into the Crank (#25). B.) Thread the Right Pedal (#10) clock wise into the Crank on the other side. EXPLODED DIAGRAM © IMPEX INC.
PARTS LIST © IMPEX INC. 11.
© IMPEX INC. 12 PART NO. DESCRIPTION SPEC. QUANTITY 1 Main Frame 1 2 Front Stabilizer 1 3 Rear Stabilizer 1 4 Front Post 1 5 Handle 1 6 Computer 1 7 Seat Post 1 8 Seat 1 9 Left Pedal 1 10 Right Pedal.
© IMPEX INC. 13 CARE, MAINTENANCE AND STORAGE 1. Inspect and tighten all parts each time you use the machine. Replace any worn parts immediately. 2. The bike can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. 3. Store the bike IN-DOOR.
AUTO START / STOP When exercise starts, the moni tor will automatically turn on and display the progress. When exercise stops, the monitor will automatically turn off after 8 minutes to save energy. Press “MODE” key, will automatically scan Time, Speed, Distance, Calories, and ODO for every 4 seconds.
Using your MAGNETIC BIKE will provide you with several benefits, it will improve your physical fitness, tone muscle and in conjunction with calo rie controlled diet help you lose weight. 1. The Warm Up Phase This stage helps get the blood flowing around t he body and the muscles working properly.
© IMPEX INC. 16 This stage is to let your Cardio-vascular System and muscles wind down. This is a repeat of the warm up exercise e.g. reduce your tempo, cont inue for approximately 5 minutes. The stretching exercises should now be repeated, again remembering not to force or jerk your muscles into the stretch.
© IMPEX INC. 17 LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser.
An important point after buying a device Impex NS-1003U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Impex NS-1003U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Impex NS-1003U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Impex NS-1003U you will learn all the available features of the product, as well as information on its operation. The information that you get Impex NS-1003U will certainly help you make a decision on the purchase.
If you already are a holder of Impex NS-1003U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Impex NS-1003U.
However, one of the most important roles played by the user manual is to help in solving problems with Impex NS-1003U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Impex NS-1003U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
