Instruction/ maintenance manual of the product MWB-345 Impex
Go to page of 12
MARCY MWB-345 BENCH IMPEX INC. 14777 Don Julian Rd. , City of Industry , CA 91746 Tel: (800) 999-8899 Fax (626) 961-9966 w w w .impex-fitness.com info@impex-fitness.
TA BLE OF CONTENT BEFORE YOU BEGIN............................................................................................... 1 IMPORTANT SAFETY NOTICE................................................................................ 2 HARDW ARE PACK……….
PRECA UTIONS This exerci se machine is built for optimum safety. H owever , certain precautions appl y whenev er you oper ate a piece of exercise eq uipment. Be sure to read the entir e manual before you assemble or operate your machi ne. In particular, note the follow ing safety precautions: 1.
3.
A SSEMBLY INSTRUCTION Tools required assembling the machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended two or more people assembling this machine to av oid possible injury . STEP 1 (SEE Diagram 1) A.) Connect the tw o Rear Upri ght Beams (#1) by a Cross Brace (#15) in the Mid-span.
STEP 2 (SEE DIA GRA M 2) A.) Connect the Front Stabilizer (#42) to the Main Seat Support (#52). Secure them w ith two M 10 x ¾” H ex Bolts (#46), four ∅ ¾ ” W a shers (#3), and two M10 Ai rcraft Nuts (#4). DO NOT tighten the nuts and bol ts yet.
STEP 3 (SEE DIA GRA M 3) A.) Attach the Leg Developer (#38) onto the bracket on the Front Stabiliz er (#42). Secure it with an Al len Socket Axle ( #44) and Allen Socket Screw (#45). B.) Insert tw o Foam Roll Tubes (#39) hal fway throug h the hole on the Leg Dev eloper.
STEP 4 (SEE DIA GRA M 4) A.) Attach the hole-si de of the Backrest Supports (#16) onto both ends of the Pivot on the Main Seat Support ( #52). The other side rest against the Backr est Adjustment Bar (#10). B.) Place the Backrest Boar d (#18) onto the Backrest Supports (#16) .
STEP 5 (SEE Diagram 5) A.) Attach the ball end of the Cable ( #27) to the Pulley (#28). Place the Pull ey in the open slot on the Lat Bar Frame ( #31). Secure it w ith one M10 x 2 1/8” Hex Bolt ( #32), two Pulley Bushings (#29), tw o ∅ ¾” W ashers (#3), and one M10 Ai rcraft Nut (#4).
9.
PARTS LIST KEY NO. DESCRIPTION QUA NTITY 1 Rear Upright Beam 2 2 M10 x 2 3/8” Hex Bolt 6 3 ∅ ¾” W asher 18 4 M10 Aircraf t Nut 9 5 1 5/8” x 3 1/8” Squar e End Cap 6 6 1 ¼” Square End Cap.
IMPEX INC. LIMITED WARRANTY IMPEX Inc. ( "IMPEX") warrants this produc t to be f r ee f rom def ec ts in workm anship and mater ial, under norm al use and servic e conditions, for a period of two years on the Fram e from the date of purchase.
An important point after buying a device Impex MWB-345 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Impex MWB-345 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Impex MWB-345 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Impex MWB-345 you will learn all the available features of the product, as well as information on its operation. The information that you get Impex MWB-345 will certainly help you make a decision on the purchase.
If you already are a holder of Impex MWB-345, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Impex MWB-345.
However, one of the most important roles played by the user manual is to help in solving problems with Impex MWB-345. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Impex MWB-345 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
