Instruction/ maintenance manual of the product MWB 214 Impex
Go to page of 12
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Pack Assembly Instruction Parts List Warranty Ordering Parts Model MWB 214 Retain This Manual for Reference 100503 OWNER'S MANUAL MARCY WEIGHT BENCH MWB-214 IMPEX ® INC.
TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTI CE....................................................................... 2 HARDWARE PACK ……….....….
IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipm ent. Be sure to read the entire manual before you assemble or operate your machine.
WRANING LABEL PLACEMENT The warning label shown here have been placed on the Cross Brace. If the label is missing or illegible, please call customer service at 1-800-888-8899 for replacemen ts.
Hardware Pack NOTE: The following parts are not drawn to scale. Pl ease use your ow n ruler or scale to measure the size. 4.
ASSEMBLY INSTRUCTION Tools Required for Assembling the Machine: Two Adjustable Wrenches. NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Connect the two Upright Beams (#1) by a Cross Brace (#2) in the mid-span.
STEP 2 (See Diagram 2) A.) Attach the Front Support (#5) to Main Seat Support (#3). Secure it with one M8 x 1 5/8” Carriage Bolt (#28), one Ø 5/8” Washer (#26), and one M8 Aircraft Nut (#24). Do not tighten the Nut and Bolt until instructed to do so.
STEP 3 (See Diagram 3) A.) Attach the Leg Developer (#6) to the open bracket on the Front Support (#5). Secure it with one M10 x 2 3/8” Hex Bo lt (#21), one Ø ¾” Washer (#31), and one M10 Aircraft Nut (#27). B.) Insert two Foam Tubes (#13) half wa y through the holes on the Leg Developer.
STEP 4 (See Diagram 4) A.) Attach the side-holes on the two Backres t Supports (#7) to the pivot on the Main Seat Support (#3). Place the other end of the Backrest Supports against the Backrest Adjustment Bar (#11). B.) Attach the Backrest Board (#8) to the Ba ckrest Supports.
9.
PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Upright Beam 2 2 Cross Brace 1 3 Main Seat Support 1 4 Diagonal Support 1 5 Front Support 1 6 Leg Developer 1 7 Backrest Support 2 8 Backrest Board 1 9 Seat Pad.
IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two year s on the Frame from the date of purchase. This warranty extends only to the original purchaser.
An important point after buying a device Impex MWB 214 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Impex MWB 214 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Impex MWB 214 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Impex MWB 214 you will learn all the available features of the product, as well as information on its operation. The information that you get Impex MWB 214 will certainly help you make a decision on the purchase.
If you already are a holder of Impex MWB 214, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Impex MWB 214.
However, one of the most important roles played by the user manual is to help in solving problems with Impex MWB 214. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Impex MWB 214 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
