Instruction/ maintenance manual of the product MP-2105 Impex
Go to page of 28
NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruc tion Parts L ist Warranty Ordering Parts Model MP-2105 Retain This Manual for Reference 10-26-06 OWNER'S MANUAL MARCY PLATINUM MP-2105 HOME GYM IMPEX ® INC.
TA BLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICES..................................................................... 2 HARDW ARE PACK……….....….
IMPORTANT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever, certain precauti ons apply w henever you operate a pi ece of exercise eq uipment. Be sure to read the entire manual before y ou assemble or operate y our machine.
WA RNING LA BEL REPLA CEMENT The w arning labels show n here have been placed on the Rear Stabiliz er and Upper Frame. If the labels are missing or illegible, please call customer service at 1- 800-888-8899 for replacements. Apply the labels in the location shown.
HA RDWA RE PA CK 4.
HA RDWA RE PA CK 5.
HA RDWA RE PA CK 6.
A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches NOTE: It is strongly recommended this machine be assembled by tw o or more people to avoid possible inj ury. STEP 1 (See Diagram 1) A.) Insert tw o Guide Rods (#16) into the holes on the Rear Stabilizer (#15).
DIAGRAM 1 8.
STEP 2 (See Diagram 2) A.) Attach the U pper Frame (#1) onto the two Guide Rods (#16). Secur e it w ith tw o M10 x ¾” All en Bolts (#78) and ∅ ¾ ” W ashers (#92). DO NOT tighten the Bolt s yet. B.) Pl ace the Upper Frame ( #1) onto the Verti cal Frame ( #4).
STEP 3 (See Diagram 3) A.) Attach the Front Press Base (#2) to the Upper Frame ( #1). Secure it w ith one 6 ¾” Front Pr ess Base Axle ( #29), tw o Ø 1 ¼” W ashers (#59), and tw o M10 Aircraft Nuts (#91) . B.) Attach the Front Press (#3) to the Front Press Base (#2) .
DIAGRAM 3 11.
STEP 4 (See Diagram 4) A.) Attach the Seat ( #32) to the Seat Post (#6). Secur e it with tw o M8 x 1 5/8” Allen Bolts ( #86) and Ø 5/8” W ashers (#88). B.) Inser t the Seat Post into the opening on the Seat Support Frame (#7) . Thread the Lock Knob (#40) into the hol e on the Seat Support Frame to lock the Seat at sel ected height.
STEP 5 (See Diagram 5) A.) Sl ide the Rig ht Butterf ly (#10) onto the ri ght ax le on the Butterfly Base (#13). B.) Inser t the Butterfly H andle (#9) i nto the piv ot on the Right Butter fly. Secure i t wi th one M10 x ¾” Allen Bolt (#78) and ∅ 1 ¼” W asher (#59) from the bottom.
CABLE LOOP DIAGRAM 14.
STEP 6 (See Diagram 6 & Upper Cable Loop Diagram) A.) Attach the 163” Upper C able (#33) to the openi ng on the front of Upper Frame ( #1). Make sure the ball stopper is underneath the Frame.
DIAGRAM 6 16.
Upper Cable Loop Diagram 17.
STEP 7 (See Diagram 7 & Low er Cable Loop Diagram) A.) Attach the 164” Low er Cable (#35) to the opening on the Leg Developer (#8). Attach a Pulley (#47) to the opening . Secure it with one M10 x 2 ½” Allen Bolt ( #84), tw o ∅ 7/8” Leg D eveloper Pulley Bushings (#52), and one M10 Ai rcraft Nut (#91) .
DIAGRAM 7 19.
Lower Cable Loop Diagram 20.
STEP 8 (See Diagram 8 & Butterfly Cable Loop Diagram) A.) Clip one end of the 98” Butterfly Cable (#34) to the open slot on the Right Butterfly (#10). B.) D raw the Cable to the open bracket on the r ight si de of the Vertical Frame ( #4). Attach a Small Pull ey (#73) to the bracket C.
22.
Butterfly Cable Loop Diagram 23.
STEP 9 (See Diagram 9) A.) Connect the Lat Bar ( #24) to the Upper C able (#33) with tw o Hooks (#37) and one Chain (#36). B.) Connect the Abdominal Strap (#70) to the Low er Cable (#35) w ith a Hook. C.) Connect the Shi ver Bar (#19) to the Low er Cable wi th two H ooks and a Chain.
WEIGHT RESISTANCE CHART WEIGHT PLATE Station 1 2 3 4 5 6 7 8 9 Low Pulley 22 33 44 55 66 77 88 99 110 Lat Pull 30 40 50 60 70 80 90 100 110 Butterfly 10 16 22 28 34 40 46 52 58 Front Press 20 34 48 62.
PA RTS LIST KEY NO. DESCRIPTION Q’ty 1 Upper Fr am e 1 51 Ø 1 ¼” Front Pr ess Bushing 2 2 Front Pr ess Base 1 52 Ø 7/8” Leg Developer Bushing 2 3 Front Pr ess 1 53 ∅ 1” Bushing 10 4 Vert .
IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") w ar rants this product to be free f rom defec ts in work m anship and m aterial, under normal use and servic e conditions, f or a period of two y ears on the Fram e f rom the date of purchas e.
An important point after buying a device Impex MP-2105 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Impex MP-2105 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Impex MP-2105 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Impex MP-2105 you will learn all the available features of the product, as well as information on its operation. The information that you get Impex MP-2105 will certainly help you make a decision on the purchase.
If you already are a holder of Impex MP-2105, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Impex MP-2105.
However, one of the most important roles played by the user manual is to help in solving problems with Impex MP-2105. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Impex MP-2105 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
