Instruction/ maintenance manual of the product MD-MXM6 Impex
Go to page of 29
NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruc tion Parts L ist Warranty Ordering Parts Model MD-MXM6 Retain This Manual for Reference 08-3-06 OWNER'S MANUAL MARCY DIAMOND ELITE SMITH CAGE MD-MXM6 IMPEX ® 14777 DON JULIAN RD.
TA BLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICES..................................................................... 2 HARDW ARE PACK….......…....
IMPORTANT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain precauti ons apply whenev er you operate a piece of exer cise equi pment. Be sure to read the entir e manual before you assembl e or operate y our machine.
WA RNING LA BEL REPLA CEMENT The w arning labels show n here have been placed on the Cross Brace, Rear Stabiliz er, and Upper Frame. If the labels are missing or illegible, please call customer serv ice at 1-800-888- 8899 for replacements. Apply the labels in location sho wn .
HA RDEWA RE PA CK 4.
HA RDEWA RE PA CK 5.
HA RDEWA RE PA CK 6.
HA RDEWA RE PA CK 7.
A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches. NOTE: It is strongly recommended tw o or more people assembling this machine to avoid possible inj ury. STEP 1 (See Diagram 1) A.) NOTE: Do not tighten the Nuts and Bol ts until instr ucted to do so.
DIAGRAM 1 9.
STEP 2 (See Diagram 2) A.) Attach the R ear Vertic al Beam (#38) onto the C ross Brace (#36) . Attach the W eight Glide Post (#34) to the Rear Vertical Beam and Cross Brace.
DIAGRAM2 11.
STEP 3 (See Diagram 3) A.) Attach the Butter fly Base (#39) and Butterfly Pul ley Br acket (#44) to the R ear Vertical Beam (#38). Ali gn the holes and secur e them with tw o M10 x 2 ½” C arriag e Bolts (#102), ∅ ¾” W ashers (#89), and M 10 Aircr aft Nuts (#106).
STEP 4 (See Diagram 4) A.) N ote: Help of another person is strongl y recommended for this step. Place the W eight Lifting Sleeve ( #48) in betw een the two Safety Stop Frames (#32).
CABLE LOOP DIAGRAM 14.
STEP 5 (See Diagram 5 & Cable Loop Diagram) A.) Attach a 124” Cable (#60) to the f ront opening on the Upper Frame (#37). Attach a Pulley (#81) to the opening . Secure it with one M10 x 2 1/8” Allen Bolt (#94) , two Ø 1 1/8” Bushings (#86), and one M10 Ai rcraft Nut (#106) .
DIAGRAM 5 16.
STEP 6 (See Diagram 6 & Cable Loop Diagram) A.) Attach one end of the 79” Butter fly Cabl e (#61) to the cli p on the Left Butterfly (#40). D raw the Cable to the left Butterfly Pulley Bracket (#44).
STEP 7 (See Diagram 7 & Cable Loop Diagram) A.) Attach one 124” Cable ( #60) to the low er opening on the Rear Ver tical Beam (#38) . Attach a Pulley to the opening. Secur e it w ith M10 x 2 3/8” Allen Bol t (#95), tw o Ø 1” Bushings (#85), and one M10 Ai rcraft Nut ( #106).
STEP 8 (See Diagram 8) A.) Attach the Front Post (#3) to the Front Stabiliz er (#17). B.) Secur e it w ith three M10 x 5/8” Allen Bolts (#90) and ∅ ¾” W ashers (#89).
STEP 9 (See Diagram 9) A.) Attach the Main Seat Support (#1) to the Rear Stabiliz er (#4). Secure it wi th two M10 x 2 3/8” Carr iage Bolt s (#100), one 5 1/8” x 2 3/8” Bracket (#21), tw o Ø ¾” W ashers (#89), and tw o M10 Aircraft Nuts (#106).
STEP-10 (See Diagram 10) A.) Attach the Leg Developer Holder (#2) to the M ain Seat Support (#1) . Secure it w ith one M10 x 5/8” Allen Bolt (#90) and Ø ¾” W asher (#89) from the top, two M10 x 3 ¾” Carri age Bolts (#101), tw o Ø ¾” W ashers (#89), and tw o M10 Aircraft Nuts (#106) from the side.
STEP-11 (See Diagram 11) A.) Insert tw o ؽ” Bushings (#113) into the holes on the Seat Bracket ( #5) and alig n the holes to the piv ot on the Main Seat Support ( #1). B.) Attach the two Backr est Supports (#10) to the Seat Bracket and alig n the holes.
STEP-12 (See Diagram 12) A.) Pl ace the Seat Pad (#8) onto the Seat Bracket ( #5). Secure it with four M 8 x 1 5/8” Al len Bolts (#99) and Ø5/8” W ashers (#88). B.) Attach the Bench Backr est Board (#9) to the Backr est Supports (#10). Secur e it with four M8 x 1 5/8” Al len Bolts (#99) and Ø5/8” W ashers (#88).
STEP-13 (See Diagram 13) A.) Insert three Foam Tubes (#16) half way through the holes on Leg Dev eloper Holder (#2) and Leg Dev eloper (#12). B.) Push six Foam Rolls ( #23) onto the Tubes from both ends. C.) Push six Foam Roll End Caps (#72) into the ends.
SMITH MACHINE EXPLODED DIAGRAM 25.
26.
PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Seat Support 1 59 1 5/8” x ¾” End Cap 2 2 Leg Developer Holder 1 60 124” Cable 2 3 Front Post 1 61 79” Butterf ly Cable 1 4 Rear Stabilizer 1 62 O.
IMPEX ® LIMITED WARRANTY IMPEX ® warrants this product to be fr ee from def ects in work m anship and m ater ial, under norm al use and service c onditions, for a period of two y ear s on the Fram e from the date of pur chase. T his warranty extends only to the original purchaser.
An important point after buying a device Impex MD-MXM6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Impex MD-MXM6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Impex MD-MXM6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Impex MD-MXM6 you will learn all the available features of the product, as well as information on its operation. The information that you get Impex MD-MXM6 will certainly help you make a decision on the purchase.
If you already are a holder of Impex MD-MXM6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Impex MD-MXM6.
However, one of the most important roles played by the user manual is to help in solving problems with Impex MD-MXM6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Impex MD-MXM6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
