Instruction/ maintenance manual of the product AIR-1 Impex
Go to page of 22
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Pack Assembly Instruction Parts List Warranty Ordering Parts Model AIR-1 Retain This Manual for Reference 121209 ASSEMBLY & OWNER'S MANUAL Deluxe Fan Bike AIR-1 IMPEX ® INC.
TABLE OF CONTENTS BEFORE YO U BEGIN................................................................................... ……. 1 IMPORTANT SAF ETY NOTIC ES..................................................................…… 2 WARNING LABEL PLACEMENT…………………………………………………… 3 HARDWARE PACK……….
© IMPEX INC. 2 IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equi pment. Be sure to read the entire manual before you assemble or operate your machine.
WARNING LABEL PLACEMENT The Warning Labels and Caution Label shown here h ave been placed on the Rear Stabilizer, Main Frame. If the labels are missing or illegible, please call cust omer service at 1-800-999-8899 for replacement. Apply the labels in location shown.
HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size. © IMPEX INC. 4.
COMPONENTS FOR ASSEMBLY © IMPEX INC. 5.
ASSEMBLY INSTRUCTION Tools Required For Assembling the Machine: One Crossing Wrench and Allen Wrench, provided by manufacturer. NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury. STEP-1 A.) Do not tighten Bolts until instructed to do so.
STEP 2 A.) Connect the Upper Computer Wire (#2) from the Front Post to the Computer Wire from the Computer (#1). B.) Attach the Computer to the Front Post (#4).
STEP 3 A.) Connect the Lower Computer Wire (#37) from Main Frame (#35) to the Upper Computer Wire (#2) from Front Post (#4). B.) Attach the Front Post to the Main Frame.
STEP 4 A.) Attach the pivot on Left Swing Handle ( #30L) to the pivot on Main Frame (#35). B.) Thread the Swing Handle Shaft (#28) though Le ft Swing Handle into Main Frame, and firmly secure them together.
STEP 5 A.) Attach the Swing Handle Connecting Rod ( #48) to the open bracket on the bottom of the Left Swing Handle (#30L). B.) Secure them together with one M8 x 1 ¾” Allen Bolt (#49) and one M8 Aircraft Nut (#50).
STEP 6 A.) Attach the pivot on Right Swing Handle (#30R ) to the pivot on Main Frame (#35). B.) Thread the Swing Handle Shaft (#28) through Right Swing Handle into Main Frame, and firmly secure them together.
STEP-7 A.) Attach the Swing Handle Connecting Rod (#48) to the open bracket on bottom of the Right Swing Handle (#30R). B.) Secure them together with one M8 x 1 ¾” Allen Bolt (#49) and one M8 Aircraft Nut (#50).
STEP-8 A.) Thread the Left Pedal (#41L) counter clockwise into Left Crank (#44L). B.) Thread the Right Pedal (41R) cl ockwise into Right Crank (#44R). © IMPEX INC.
STEP-9 A.) Remove the three Ø 5/8” Seat Flat Washer s (#32) and M8 Seat Aircraft Nut (#33) from the Seat Pad (#31). B.) Attach the Seat Pad to the Seat Post (#34) . Secure it with the three Ø 5/8” Seat Flat Washers (#32) and M8 Seat Aircraft Nu t (#33) from the Seat Pad (#31).
STEP-10 A.) Insert the Seat Post (#34) into the opening one Main Frame (#35). B.) Thread the Lock Knob (#63) th rough the hole on Seat Post to securely hold it at desired height.
EXPLODED DIAGRAM © IMPEX INC. 16.
© IMPEX INC. 17 PARTS LIST PART NO. DESCRIPTION SPEC. QUANTITY 1 Computer TZ-2119 1 2 Upper Computer Wire 1 3 Computer Philips Screw 4 4 Front Post 1 5 Allen Bolt M8 x 5/8” 12 6 Washer Ø 5/8” 8 .
© IMPEX INC. 18 37 Lower Computer Wire 1 38 Floor Level Adjustment Knob 2 39 Front Stabilizer 1 40 Stabilizer End Cap 4 41L Left Pedal 1 41R Right Pedal 1 42 Nut Cap 4 43 Hex Flange Nut M10 4 44L Lef.
© IMPEX INC. 19 CARE, MAINTENANCE AND STORAGE 1. Inspect and tighten all parts each time you use the machine. Replace any worn parts immediately. 2. The bike can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. 3. Store the bike IN-DOOR.
COMPUTER MODE Press “MODE” button, will automatically scan Time, Speed, RPM, Distance, and Calories, for every 6 seconds. Time Display the elapsed time. Max value is up to 99:59. Speed Display the current speed in miles per hour. RPM Display repetition/min, Speed and RPM di splay will switch to each other every 6 seconds.
© IMPEX INC. 21 riginal purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's ption. commercial or rental purposes. No other warrant y beyond that specifically se t forth above is authorized by xclusion or limitati on of incidental or consequential damages.
An important point after buying a device Impex AIR-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Impex AIR-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Impex AIR-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Impex AIR-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Impex AIR-1 will certainly help you make a decision on the purchase.
If you already are a holder of Impex AIR-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Impex AIR-1.
However, one of the most important roles played by the user manual is to help in solving problems with Impex AIR-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Impex AIR-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
