Instruction/ maintenance manual of the product Management Module SNMP IMC Networks
Go to page of 24
SNMP Management Module Operation Manual.
ii FCC Radio Frequency Inter ference Statem ent This equipment has been tested and found t o comply with the limits for a Class B computing device, pur suant to Part 15 of the F CC Rul es. These limits are designed to provid e reasonable protection against harmful interference when the equipment is operated in a com mercial environment.
iii Table of Cont ents FCC Radio Fre quency Interfe rence Statemen t ....................................................... . ii Warranty ............................. ................................................................. ................
1 Abou t the SN MP Manage ment M odule The SNMP Management Module inclu des two twisted pair po rts, one fo r management and one reserved for future use.
2 SNMP Managemen t Module LEDs Each SNMP Management Module featur es several LEDs. The LED functions are: LNK/ACT FDX/COL TEMP PS FAN A / FAN B Glows green when a link is es tablished on port. Glows green when data activity occurs. Blinks amber when port is in Full-Duple x mode.
3 TABLE: Configuration Options IView2 Serial Telnet iConfig VLANS 9 9 Modes 9 9 IP 9 9 9 9 Subnet Mask 9 9 9 9 Default Gatewa y 9 9 9 9 Bandwidth 9 9 9 Softwa re Updates 9 9 TFTP 9 TFTP 9 SNMP Wri te .
4 1. Open a session in iC onfig with a device you want to admi nister. 2. Choose the Administration tab. 3. Click the Save PROM Fi le button. 4. The Save as PR OM dial og box appears. 5. Choose a fold er and the n select the filename you wish to save.
5 8. After rebooting, set the SNMP Write Loc k switch back to NOR MAL . The previously made settings to th e applicati on modul es will be acti ve. NOTE When removin g an SNMP car d with the SN MP Write Lo ck enabled (set to LOCKED), current ap plication m odules sett ings will n ot be chan ged.
6 About iConfig iConfig is an in-band configuration util ity ( in iVie w²) t hat let s user s quic kly and easily complete the first stages of SNMP configuration for SNMP- manageable devices. iConfi g can set the IP address, subnet mask and default gateway as well as defi ne the co mmunity strings and SN MP traps.
7 the iVie w² CD. For information regard in g the use of the iConfig utility, refer to the iConfig ut ility help file. About Serial Port Confi guration The SNMP Ma nagement Mo dules u sed with the iMed iaChassi s series feature a serial port that incl udes a DB-9 seria l connector.
8 Saved Va lues This section displays change s made during current session: • IP Address (MUS T be assigned during initial configuration) • Subnet Mask (MUST be assigned during init ial configurat.
9 device, pressing Enter after each. The default ga teway can also be assigned, if desir ed (press Enter to skip). When finis hed, p ress Enter , then type reboot for changes to take effect . The Saved Values and Current Values should now displa y both the change s made (e.
10 function enables A LL of th e traps. To selectively activate and deactivate traps, use iCon fig. iConfig Traps allo w greate r cont rol using the Trap Edit than the serial and Telnet does. To choose generic or enterprise-specific Traps, use iConfig.
11 If the download is interr upted, do not reset the mo dule or reboot the SNMP Management Module; doing so can corrupt the PROM and rend er the module useless. Close the sessi on an d then open a new TFT P session. Additional Device-Specific Options The iMediaChassis series also includes device-specific op tions.
12 Downloading Files Refer to Device-Specific Options— Down loading Files . Using iV iew² iView² i s a networ k manageme nt appl ication for IMC Networks’ i ntelligent networki ng devices. It feature s a gr aphic user interface (GUI) and gives network managers the abilit y to monitor and control products from a variety of platforms.
13 UMA (Unified Management Agent) Central ized management m akes pra ctica l sense for networks of all sizes, especially servi ce provid er network s that must mo nitor and upg rade large quantities of devices.
14 Easy U pgr ades w ith t he Un ifie d Manag emen t Agen t • Upgrade one or multiple Ho st (CO) or Remote (CPE ) devices with just a few mouse clicks. Refer to the iMcV -FiberLinX-II, iMcV-GigaFiberLinX, Acce ssEth erLin X and IE -Mini F iberL in X-II series manu als for complete information.
15 Telnet Session With the Unified Management Agent, users can also manage multiple devices installed in, or connected to, an iMediaC hassis via a Telnet sessio n, as well as assi gnin g an IP address. In the example below, the devices li sted on the left (e.
16 System Requirements To run iView², the management PC must be equipped with the following: • 29 MB free disk s pace, 64 MB RAM • Windows NT 4.0 Service Pack 5, 20 00 Profe ssional, XP Professional • Microsoft SNMP Services Installe d • Microsoft IE 4.
17 IMC Networks Technical Suppor t Tel: (949) 465-3000 or (800 ) 624-1 070 (in the U.S. and Cana da); +32-16-550 880 (Europe) Fax: (9 49) 465-3 020 E-Mail: techsuppor t@im cnetwork s.
18 El ectro stati c Dis charg e Preca utions Electrostatic discharge (ESD) can cause dama ge to y our add-in modules. Always observe the following precautions when instal ling or handling an add-in module or any board assembly. 1. Do not remove unit from its protective pa ckagin g until you’re re ady to install it.
19 Safety Certif ications UL/CUL: Listed to Safety of Informati on Technology Equipm ent, including Electrical Business Equipment. CE: The products described herein comply with the Council Directive o.
20 Notes.
19772 Pauling • Foothill Ran ch, CA 92610-26 11 USA TEL: (94 9) 465 -3000 • FAX: (949 ) 465-3 020 www.imcnetworks.com © 2008 I MC Networks. Al l rights r eserved. The info rmation in this docum ent is subject to change with out no tice. I MC Networks assumes no responsibili ty for an y errors that may appear in this document.
An important point after buying a device IMC Networks Management Module SNMP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought IMC Networks Management Module SNMP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data IMC Networks Management Module SNMP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, IMC Networks Management Module SNMP you will learn all the available features of the product, as well as information on its operation. The information that you get IMC Networks Management Module SNMP will certainly help you make a decision on the purchase.
If you already are a holder of IMC Networks Management Module SNMP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime IMC Networks Management Module SNMP.
However, one of the most important roles played by the user manual is to help in solving problems with IMC Networks Management Module SNMP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device IMC Networks Management Module SNMP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
