Instruction/ maintenance manual of the product IMTL22506.0 Image
Go to page of 23
Model No. IMTL22506.0 Serial No. Write the serial number in the space above for future reference. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. USER'S MANUAL Serial Number Decal Visit our website at www .
2 T ABLE OF CONTENTS IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. It is the responsibility of the owner to ensure t hat all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side.
4 2 3. Inspect and properly tighten all parts of the treadmill regularly . 24. Never drop or insert any object into any opening. 25. DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures d escribed in this manual.
5 BEFORE YOU BEGIN Thank you for selecting the IMAGE ® 425 GTX tread- mill. The 425 GTX treadmill combines advanced technology with innovative design to let you enjoy an e xcell ent fo rm of cardiovascular exercise in the conve- nience and privacy of y our ho me.
6 ASSEMBL Y T o hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed.
7 4. Hold a Frame Spacer (27) against the right side of the Frame (79) as shown. Insert a Frame Bolt (70) into the frame bolt hole in the Upright Spacer and the Frame. Next, tighten a Spacer Screw (45) into the Upright Spacer and the Frame. Then, remove the Frame Bolt.
8 2 Plastic T ies 2 59 60 52 8. Set the Console Base (52) on the Handrails (59). Thread four 3/4" Screws (2) into the Handrails and the Console Base. After you have started all four Screws, tighten the Screws until they are snug; do not overtighten the Screws.
9 48 2 53 12 12. With the help of a second person, carefully raise the Left Upright (53) and Right Upright (not shown), to a vertical position. Attach the Storage Latch (48) to the Left Upright (53) with two 3/4" Screws (2). 13. Make sure that all parts used in assembly are properly tightened before you use the treadmill.
10 OPERA TION AND ADJUSTMENT T HE PRE-LUBRICA TED WALKING BEL T Y our treadmill features a walking belt coated with high- performance lubricant. IMPORT ANT : Never apply sil- i cone spray or other substances to the walking b elt or the walking platform.
1 1 STEP-BY -STEP CONSOLE OPERA TION Before operating the console, make sure that the power cord is properly plugged in (see page 10). In addition, locate the reset/off circuit break- er on the treadmill frame near the power cord, and make sure that the circuit breaker is in the reset posi- tion.
12 Follow your progress with the display . The display features seven modes: • T ime—This mode displays the elapsed time. • Distance—This mode displays the distance that you have walked or run. • Fat Calories—This mode displays the approxi- mate number of fat calories you have burned (see F A T BURNING on page 18).
13 HOW TO CHANGE THE INCLINE OF THE TREADMILL T o vary the intensity of your exercise, the incline of the treadmill can be changed; there are three incline levels. Before changing the incline, remove the key a nd unplug the power cord. N ext, fold the treadmill to the storage position (see HOW TO FOLD THE T READMILL FOR ST ORAGE on page 14).
14 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, unplug the power cord. CAUTION: Y ou must be able to safely lift 45 pounds (20 k g) in order to raise, lower or move the treadmill. 1. Hold the treadmill with your hands in the location shown by the arrow at the right.
15 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Press the storage latch to the left. Pivot the frame down until the frame and the foot rail are past the storage latch. 2. Hold the frame firmly with both hands, and lower it to the floor .
16 MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by following the steps below . Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
17 PROBLEM: The walking belt slows when walked on S OLUTION: a . Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may become damaged.
18 CONDITIONING GUIDELINES The following guidelines will help you to plan your exercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physi- cian.
19 SUGGESTED STRETCHES T he correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1 . T oe T ouch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
P ART LIST—Model No. IMTL22506.0 R0906A 1 1 Motor Hood 2 14 3/4" Screw 3 13 3/4" T ek Screw 4 5 8" Cable T ie 5 1 Cable T ie 6 1 Clamp Screw 7 1 Cable T ie Clamp 8 2 Foot Rail 9 4 Iso.
3/8" W asher (66)–8 Wheel Bolt (67)–2 3/8" Nut (61)–6 Upright Bolt (65)–4 Silver Ground Screw (69)–1 3/8" Star W asher (29)–2 3 3/4" Screw (2)–13 3/4" T ek Screw.
61 21 21 5 3 7 4 57 57 57 57 22 23 24 25 26 20 19 61 76 27 17 47 16 45 10 3 18 51 30 28 36 29 3 18 39 38 27 45 8 10 3 3 79 14 73 77 74 72 88 15 80 82 81 38 83 86 82 81 85 49 38 86 64 88 87 13 80 14 15.
Part No. 246350 R0906A Printed in USA © 2006 ICON IP , Inc. ORDERING REPLACEMENT P ARTS T o order replacement parts, please see the front cover of this manual. T o help us assist you, be prepared to give the following information: • the MODEL NUMBER of the product (IMTL22506.
An important point after buying a device Image IMTL22506.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Image IMTL22506.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Image IMTL22506.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Image IMTL22506.0 you will learn all the available features of the product, as well as information on its operation. The information that you get Image IMTL22506.0 will certainly help you make a decision on the purchase.
If you already are a holder of Image IMTL22506.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Image IMTL22506.0.
However, one of the most important roles played by the user manual is to help in solving problems with Image IMTL22506.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Image IMTL22506.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
