Instruction/ maintenance manual of the product IMHS80081 Image
Go to page of 17
USERÕS MANUAL QUESTIONS? As a manufacturer , we are com- mitted to providing complete customer satisfaction. If you have questions, or find that there are missing or damaged parts, we will guarantee complete satis- faction through direct assistance from our factory .
T ABLE OF CONTENTS LIMITED W ARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORT ANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . .
3 IMPORT ANT SAFETY INSTRUCTIONS W ARNING: T o reduce the risk of drowning, electric shock, or serious injury , read the following important precautions before using the hydrotherapy spa.
4 motor of this unit to connect a minimum No. 8 A WG (804 mm 2 ) solid copper conductor between this unit and any metal equipment, electrical enclosure made of metal, metal water pipes, or conduit within five feet (1.
5 W ARNING LABEL IDENTIFICA TION The warning labels shown below have been placed on the spa cover , printed inside the inflatable spa liner , and placed on the side of the spa jet unit of the hydrotherapy spa. Locate the labels and familiarize yourself with this information.
6 BEFORE YOU BEGIN Thank you for selecting the IMAGE ¨ RENEW 800. The innovative RENEW 800 offers the features and quality of a traditional hot tub at an affordable price. Best of all, the RENEW 800 is fully portable, so you can take it wherever there is an electrical outlet.
7 CHOOSING A LOCA TION FOR THE HYDROTHERAPY SP A There are many factors to consider when choosing a location to set up the hydrotherapy spa. These factors vary depending on whether you use the hydrotherapy spa inside or outside. We have listed several factors you may wish to consider as you decide where you want to use the hydrotherapy spa.
8 1. Before beginning assembly , be sure that you have read and understand the information in the box above and on the previous page. Unfold the pre-assembled Fabric Spa Surround (8) and Side Panels (1, 2) until the assembled unit is round.
9 4. Remove the power cord from the Spa Jet Unit (13). With the help of a second person, place the Spa Jet Unit (13) over the Side Panel (1) and the section of the Inflatable Spa Liner (9) which does not have the cushion. Be extremely careful not to tear the Inflatable Spa Liner (9) as you slide the Spa Jet Unit into place.
10 USING THE HYDROTHERAPY SP A The hydrotherapy spa is designed for up to four adults. The six water jets can be regulated to provide a relaxing massage to sooth away stress, and the strength of the water massage can be adjusted by the air control.
11 ST ARTING THE HYDROTHERAPY SP A Once you have tested the GFCI, you should verify the water flow from the pumping unit. Set the air control on the console to the lowest setting (see USING THE CONSOLE on the next page). The pumping unit will heat the water as it pumps.
12 SP A JET UNIT OPERA TION The spa jet unit features three hydro-therapy jets, a whirlpool jet, a suction vent, and a filter housing. The three hydro-therapy jets (A), located on the front of the spa jet unit, focus the water massage on your neck and back.
13 CLEANING THE INFLA T ABLE SP A LINER The liner should be cleaned with a mild soap solution. Do not use solvents. The liner should always be clean and dry before being moved or stored. CHECKING AND CLEANING THE FIL TER The filter should be checked periodically for build-up of dirt and oil.
14 1. SYMPTOM: THE SP A WILL NOT OPERA TE a. Check the power cord. The power cord must be plugged into a grounded outlet (see PLUG- GING IN THE HYDROTHERAPY SP A on page 10). b. Check to see if the GFCI breaker is tripped, or was not turned on. Reset the GFCI breaker .
15 b. The pump may have a bad bearing. Contact our customer service department. 6. SYMPTOM: THE W A TER DOES NOT HEA T a. The heater is attached to the pump in the spa jet unit. If the pump is operating, the water should heat. Cover the hydrotherapy spa with the spa cover .
Part No. 154414 J00437AC R0499A Printed in USA © 1999 ICON Health & Fitness, Inc. ORDERING REPLACEMENT P ARTS T o order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday , 6 a.m. until 6 p.
P ART LISTÑModel No. IMHS80081 R0399A Note: Ò#Ó indicates a non-illustrated part. Specifications are subject to change without notice. Key No. Qty .
An important point after buying a device Image IMHS80081 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Image IMHS80081 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Image IMHS80081 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Image IMHS80081 you will learn all the available features of the product, as well as information on its operation. The information that you get Image IMHS80081 will certainly help you make a decision on the purchase.
If you already are a holder of Image IMHS80081, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Image IMHS80081.
However, one of the most important roles played by the user manual is to help in solving problems with Image IMHS80081. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Image IMHS80081 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
