Instruction/ maintenance manual of the product Advanced 2200 IMTL94106.0 Image
Go to page of 30
Model No. IMTL94106.0 Serial No. CAUTION Read all precautions and instruc - tions in this manual before using this equipment. Save this man - ual for future reference. Write the serial number in the space above for future reference. QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction .
2 T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 W ARNING: T o reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure t hat all users of this treadmill are adequately informed of all warnings and precautions.
20. Do not attempt to raise, lower, or move the t readmill until it is properly assembled. (See ASSEMBLY on page 7, and HOW TO FOLD A ND MOVE THE TREADMILL on page 22.) You must be able to safely lift 45 pounds (20 k g) to raise, lower, or move the treadmill.
5 The decals shown here have been placed on the treadmill. If a decal is missing, or if it is not legible, call the toll-free telephone number on the front cover of this manual and order a free replacement decal. Apply the decal in the location shown.
6 Congratulations for purchasing the IMAGE ® AD- VANCED 2200 tre admi ll. The ADVANCED 2200 tread- mill offers an impressive array of features designed to h elp you achieve your fitness goals in the convenience o f your home.
7 ASSEMBL Y To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly r equires two persons. Place the treadmill in a cleared area and remove all packing materials. Do not dispo se of the packing materials until the treadmill is assembled.
8 68 5 Collar Spring 114 55 Knob 132 3 Small Holes 3. With the help of a second person, raise the treadmill F rame (55). Hold the Latch Housing (68) and the Latch Housing Cover (5) against the sides of the Frame as shown. Loosely thread the two blunt-tipped 1/2” Screws (132) into the Latch Housing Cover and the Latch Housing as shown.
9 HOW TO CONNECT AN ANTENNA Indoor Antenna 1. Place a VHF antenna in the desired loca- tion. Connect the 300 ohm fl at wire from the antenna to a 300 ohm to 75 ohm adapter. 2. Push the 300 ohm to 75 ohm adapter onto the 75 ohm an- tenna terminal on the treadmill frame near the power cord.
10 THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- i cone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
1 1 FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to help you get the most from your workouts. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the touch of a button.
12 H OW TO TURN ON THE POWER Plug in the power cord (see page 10). Next, locate the reset /off circuit breaker near the power cord. Make sure that the circuit breaker is in the reset position.
13 The right display —This display will show the dis- tance that you have walked or run, the number of 1 /4-mile laps you have completed, the speed of the walking belt, and the approximate numbers of c alories a nd f at calories y ou have burned (see FAT BURNING on page 25).
14 H OW TO USE A PRESET PROGRAM Insert the key into the console. See HOW TO TURN ON THE POWER on p age 12. Select a preset program. To select a preset program, press the Speed & Incline button repeatedly. The right display will show which preset program (P-1 through P-10) is selected.
15 To stop the program at any time, press the Stop button. The time will begin to fla sh i n th e lef t di s- p lay. To restart the program, press the Start bu tto n or the Speed increase bu tton.
16 H OW TO CREATE A CUSTOM PROGRAM I nsert the key into the console. S ee HOW TO TURN ON THE POWER on page 12. Select a custom program. To select a custom program, press the Custom button repeatedly until “P-15” or “P-16” appears in the right display.
17 H OW TO USE A CUSTOM PROGRAM I nsert the key into the console. S ee HOW TO TURN ON THE POWER on page 12. Select a custom program. To select a custom program, press the Custom button repeatedly until “P-15” or “P-16” appears in the right display.
18 H OW TO USE A HEART RATE PROGRAM Follow the steps below to use a heart rate program. Insert the key into the console. See HOW TO TURN ON THE POWER on page 12. Select a heart rate program. To select a heart rate program, press the Heart Rate button repeatedly until “P-11,” “P-12,” “P-13,” or “P-14” appears in the right display.
19 Hold the handgrip pulse sensor. I t is not necessary to hold the handgrip pulse sen- sor continuously during a pulse program; how- e ver, you must hold the handgrip pulse sensor fre- quently. Each time you hold the handgrip pulse sensor, keep your hands on the metal con- tacts for at least 15 seconds.
H OW TO OPERATE THE PERSONAL TELEVISION IMPORTANT: Before operating the television, you must connect an antenna, a 75 ohm CATV cable, or a VCR to the 75 ohm antenna terminal on the tread- m ill. See page 9 for instructions. Follow the steps below to operate the television.
21 Press the Power button again and add or delete channels. After all valid channels available in your area have been saved into the television’s memory (see step 5 on page 21), you can manually add channels or delete unwanted channels.
22 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE B efore folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
PROBLEM: The walking belt is off-center or slips when walked on S OLUTION: a . If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD .
25 The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with the proper intensity.
T o locate the parts listed below, see the EXPLODED DRAWING attached in the center of this manual. 26 P ART LIST—Model No. IMTL94106.0 R1006A 1 2 Foot Rail 2 1 Left Outside Housing 3 1 Left Handgrip.
101 2 Wheel Housing 1 02 1 Power Cord Assembly 103 1 TV Console 104 2 Caution Decal 105 2 Spring Plate 1 06 1 Left Handgrip, Bottom 107 1 Key/Clip 108 6 Roller Star Washer/Foot Washer 109 2 Idler Arm .
105 33 105 33 130 128 129 123 120 129 128 120 131 26 102 56 9 10 15 14 13 10 44 89 18 22 24 32 121 32 13 31 9 10 12 7 57 66 42 42 66 84 41 84 84 53 63 109 64 79 1 10 13 1 15 99 109 7 57 4 4 59 48 48 5.
80 106 3 81 40 40 50 40 94 126 40 40 40 40 40 1 1 1 40 40 40 1 17 40 40 40 40 40 40 40 67 127 127 40 40 40 69 69 40 40 92 92 87 87 74 40 107 70 40 39 70 70 70 77 78 98 52 104 104 78 13 77 78 78 13 98 52 13 91 125 88 65 124 13 101 101 13 43 43 85 61 93 82 88 43 95 97 96 71 51 72 100 70 44 73 44 1 13 103 EXPLODED DRA WING—Model No.
Part No. 246009 R1006A Printed in USA © 2006 ICON IP, Inc. ORDERING REPLACEMENT P ARTS T o order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to give the following information: • the MODEL NUMBER of the product (IMTL94106.
An important point after buying a device Image Advanced 2200 IMTL94106.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Image Advanced 2200 IMTL94106.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Image Advanced 2200 IMTL94106.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Image Advanced 2200 IMTL94106.0 you will learn all the available features of the product, as well as information on its operation. The information that you get Image Advanced 2200 IMTL94106.0 will certainly help you make a decision on the purchase.
If you already are a holder of Image Advanced 2200 IMTL94106.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Image Advanced 2200 IMTL94106.0.
However, one of the most important roles played by the user manual is to help in solving problems with Image Advanced 2200 IMTL94106.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Image Advanced 2200 IMTL94106.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
