Instruction/ maintenance manual of the product 831.105021 Image
Go to page of 24
® Model No. 831.105021 Serial No. Write the serial number in the space above for reference. The serial number decal is found on the frame behind the access cover . CAUTION Read all precautions and instruc- tions in this manual before using this equipment.
T ABLE OF CONTENTS IMPORT ANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 IMPORT ANT SAFETY INSTRUCTIONS W ARNING: TO REDUCE THE RISK OF DROWNING, ELECTRIC SHOCK, OR SERIOUS INJUR Y , READ THE FOLLOWING IMPORT ANT PRECAUTIONS BEFORE USING THE HYDROTHERAPY SP A.
4 Do not use the spa until the GFCI has been repaired or replaced by a qualified electri- cian. 20. Keep all electrical appliances such as radios, telephones, televisions, and lights at least five feet (1.5 m) away from the water . 21. DANGER—Risk of electric shock: Do not set up the hydrotherapy spa within five feet (1.
5 33. W ARNING—T o reduce the risk of injury: It is especially important for persons over the age of 35 or persons with pre-existing health problems, such as obesity , heart disease, high or low blood pressure, circulatory prob- lems, or diabetes to consult their physician before using this product.
6 BEFORE YOU BEGIN Thank you for selecting the innovative IMAGE ® RENEW 510 hydrotherapy spa. The RENEW 510 offers the features and quality of a traditional hot tub at an affordable price. Best of all, the RENEW 510 pro- vides the benefits of hydrotherapy in the comfort and privacy of your own home.
7 CHOOSING A LOCA TION FOR THE HYDROTHERAPY SP A There are many factors to consider when choosing a location to set up the hydrotherapy spa. These factors vary depending on whether you use the hydrotherapy spa inside or outside. We have listed several factors you may wish to consider as you decide where you want to use the hydrotherapy spa.
8 SET -UP AND ASSEMBL Y Before beginning assembly , carefully read the following information and instructions: • Place all parts in a cleared area and remove the packing materials from the spa shell; do not dis- pose of the packing materials until assembly is completed and the spa is in operation.
9 Fill to Here 3 4 4. Place the Spa Cover (18) over the spa. Make sure that the Spa Cover is centered. Snap a Buckle (2) onto each of the four latches on the Spa Cover (18). Pull down one of the straps on the Spa Cover (18) and hold the Buckle (2) against the wood panels on the side of the spa.
USING THE HYDROTHERAPY SP A The hydrotherapy spa is designed to seat two adults. The ten thera-jets can be regulated to provide a relax- ing massage to sooth away stress, and the strength of the water massage can be adjusted by the air con- trol.
11 A A B B D C E B A A SP A SHELL DIAGRAM SP A OPERA TION Refer to the diagram above. The function of each component is explained below: The six uni-directional thera-jets (A) are located on the sides of the spa. Five jets focus a water massage on your upper or lower back.
12 Refer to the diagram above. The function of each control is explained below: T emperature Buttons: Control the temperature setting of the water . The temperature can be set from 70°F to 104°F . The water heats at about 1.8°F per hour with the cover on.
13 SECURING THE SP A COVER T o secure the spa cover , snap the latches on the spa cover into the buckles on the side panels. T o lock the buckles, insert the key and turn it clockwise 1/4 turn. T o unlock the buckles, insert the key and turn it counter- clockwise 1/4 turn.
14 The hydrotherapy spa is designed to provide you with years of enjoyment. Please follow the guidelines below to properly maintain the spa. MAINTENANCE SCHEDULE DAIL Y • Check the water level and refill the spa to the level shown in step 3 on page 9.
15 Additional chemicals can be purchased at a pool and spa supply store. CAUTION: The chemicals used to maintain the pH balance of the water and to sanitize the water can be dangerous. Always follow these basic guide- lines when handling the chemicals: 1.
16 DRAINING THE HYDROTHERAPY SP A The hydrotherapy spa should be drained at least four times a year and refilled with clean water . Y ou may need to drain the spa more often, depending on the user load. This must be done, because after repeated chemical treatment, the water becomes chemically saturated.
17 WINTER USE AND CARE The hydrotherapy spa is designed for year-round use. If you decide to store the hydrotherapy spa for the winter , store it in a warm, dry location. Follow the steps below to winterize the hydrotherapy spa. 1. Drain the spa (see DRAINING THE HYDROTHERAPY SP A on page 16).
18 1. SYMPTOM: THE SP A WILL NOT OPERA TE a. Check to see if the GFCI breaker is tripped, or was not turned on. Reset the GFCI breaker . 2. SYMPTOM: THE CIRCUIT BREAKER OR THE GFCI TRIPS WHILE THE SP A IS OPERA TING a. Reset the circuit breaker or the GFCI.
19 8. SYMPTOM: THE W A TER PULSA TES OR THERE IS MINIMUM W A TER FLOW a. Adjust the water level. This usually occurs only when the water level is low . Add water until the thera-jets are covered (see step 4 on page 9). 9. SYMPTOM: THE W A TER LEVEL DROPS a.
20 P ART LIST—Model No. 831.105021 R1200A Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. 1 8 Buckle Screw 2 4 Buckle 3 4 #8 x 5/8” Screw 4 4 M.
21 EXPLODED DRA WING—Model No. 831.105021 R1200A 4 28 5 13 29 12 3 14 9 16 16 3 9 15 1 2 2 7 17 18 26 25 20 20 31 20 27.
22 NOTES.
23 NOTES.
ORDERING REPLACEMENT P ARTS T o order replacement parts, simply call our Customer Service Department toll-free at SEARS 1-800-4MYHOME (469-4663), or SEARS 1-877-LEFOYER (533-6937) 24 hours a day . T o help us assist you, please be prepared to give the following information when calling: • The MODEL NUMBER of the product (831.
An important point after buying a device Image 831.105021 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Image 831.105021 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Image 831.105021 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Image 831.105021 you will learn all the available features of the product, as well as information on its operation. The information that you get Image 831.105021 will certainly help you make a decision on the purchase.
If you already are a holder of Image 831.105021, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Image 831.105021.
However, one of the most important roles played by the user manual is to help in solving problems with Image 831.105021. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Image 831.105021 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
