Instruction/ maintenance manual of the product DTV2784 ILO
Go to page of 80
TV/CABLE MODE SELECTION SELECCIÓN DEL MODO DE TV/CABLE When shipped from the factory , the TV/CABLE menu option is set to the “CABLE” (Cable T elevision) mode.
2 The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
3 ENGLISH GROUND CLAMP ELECTRIC SERVICE EQUIPMENT ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) NEC-NATIONAL ELECTRICAL CODE GROUND CLAMPS S2898A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE 13.
4 Troubleshooting ......................................................................... 37 Specifications ............................................................................. 38 LIMITED WARRANTY ...........................................
5 ENGLISH Features High Quality Picture Horizontal Resolution more than 500 lines exceeds Super VHS (400 lines) or Laser Disc (430 lines) in resolution.
6 Parts and functions Front Rear *VOLUME ▲ / ▼ buttons POWER button *CHANNEL ▲ / ▼ buttons Remote sensor AUDIO (L/R)/VIDEO IN jacks (VIDEO2) * To display the menu screen. Press both VOLUME ▲ / ▼ buttons at the same time to display the menu screen.
7 ENGLISH Remote control PICTURE SIZE – / 9 1 2 3 4 5 6 7 8 10 12 11 13 14 15 16 4. SLEEP Button - To set the TV to turn off after a preset amount of time, press the SLEEP button. The clock will count up 10 minutes each time the button is pressed in the order of 0h00m, 0h10m,.
8 If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see page 9 for Cable TV connections.
9 ENGLISH FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE For basic cable service not requiring a Converter/Descrambler box, connect the 75 ohm Coaxial Cable directly to the RF IN Jack on the back of the unit.
10 Connections to other equipment The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.
11 ENGLISH YP B P R YP B P R T o connect the TV to a DVD player/Satellite receiver If your DVD player or Satellite receiver has a S-Video out jack, connect cords as shown.
12 Using an A V Amplifier with built-in digital surround If you are using an Amplifier with built-in digital surround sound as follows, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an A V amplifier with built-in Dolby Digital decoder , or etc as shown below.
13 ENGLISH TV GAME T o connect the TV to a camcorder T o connect the TV to a Game The TV can also be used as a display device for many video games. However , due to the wide variety of signals generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams.
14 Starting setup 4 2 3 Press or to select “ ST ART ” , then press ENTER . If you select “ CANCEL ” and press ENTER , the ST ARTING SETUP stops and changes to the TV screen. 1 Press POWER . The starting setup function begins and the Language setup menu appears on the screen.
15 ENGLISH 3 Then press or to select (SETUP) menu. Press or to select the desired language: English (ENGLISH), French (FRAN Ç AIS) or Spanish (ESPA Ñ OL).
16 Press MENU . The menu screen will appear . Press or to select (SETUP) menu. This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory , skipping over unwanted channels. Before selecting channels, they must be pro- grammed into the TV ’ s memory .
17 ENGLISH Press MENU . The menu screen will appear . Press or to select (SETUP) menu, then press or to select “ AUTO CH MEMORY ” . Automatic memory tuning 1 2 3 To add/delete channels SETUP LANGU.
18 VOLUME 32 TV operation If a channel with no broadcast is selected, the sound will automati- cally be muted. If a station being viewed stops broadcasting, the TV will automati- cally shut itself off after 15 minutes. To turn on the TV, press POWER .
19 ENGLISH ANT ABCD 12 SLEEP T o set the unit to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count up 10 minutes for each press of the SLEEP button (0h00m, 0h10m, .
20 Press or to display the password entering mode. Setting the V -Chip Press MENU . The menu screen will appear . Then press or to select (LOCKS) menu. Select and enter a password (4 digits) using the number buttons (0-9) , then press ENTER . Enter the same password again to confirm, then press ENTER .
21 ENGLISH 1 NOTE: The V -Chip function is activated only on programs and input sources that have the rating signal. Press or to display the password entering mode. Use number buttons (0-9) to enter your password, then press ENTER . The LOCKS menu appears.
22 To change the password Enter the same password again to confirm, then press ENTER . Press EXIT to return to the normal screen. 4 6 Enter a new password using the number buttons (0-9) , then press ENTER . 5 1 Press or to display the password entering mode.
23 ENGLISH Locking channels Press or to highlight CH LOCK and press or to display the CH LOCK menu. 4 1 Press MENU , then press or to display the (LOCKS) menu. Use the number buttons (0-9) to display the television channel you wish to lock. 3 Press or to display the password entering mode.
24 Locking the video inputs 4 1 Press or to display the password entering mode. Press MENU , then press or to display the (LOCKS) menu. 3 Use the number buttons (0-9) to enter your password, then press ENTER . The LOCKS menu appears. Press or to highlight VIDEO LOCK.
25 ENGLISH LOCKS V-CHIP SET LOCK FRONT PANEL LOCK NEW PASSWORD :SELECT :ADJUST 1 2 Setting the front panel lock Press or to select “ FRONT P ANEL LOCK ” and press or to select “ ON ” . If a button on the front panel is pressed, the message “ NOT A V AILABLE ” appears.
26 Labeling channels Select a channel you want to label. Press or to select “ SET/ CLEAR ” . Press or to select “ SET ” . Press MENU , then press or to select (OPTION) menu. Press or to select “ CH LABEL ” , then press or . The CH LABEL menu will appear .
27 ENGLISH Set the DA Y , YEAR and TIME as in step 3. After setting the clock, date and time starts functioning automatically . 4 Setting the clock NOTE: After a power failure or disconnection of the power , the clock settings will be lost. In this case, reset the present time.
28 Setting the on timer EXAMPLE: T urning on the TV to channel 12 at 7:30 AM, daily . Preparation: Set the clock, if you have not already done so (see page 27).
29 ENGLISH NOTES: • If a station being viewed stops broadcasting, the TV will automati- cally shut itself off after 15 minutes. • T o confirm the ON/OFF TIMER: Press -/DISPLA Y to indicate the program on the screen. • T o return from ON/OFF TIMER menu to OPTION menu, select “ OPTION MENU ” then press or .
30 16:9 picture size This image will display the size of standard 16:9 with black bars at the top and bottom. Setting the picture size 4:3 picture size T o fill the screen, the top and bottom edges are extended more widely though the center of the picture remains near former ratio.
31 ENGLISH NOTE: The CONTRAST default setting is set to maximum at the factory . Press MENU , then press or to select (PICTURE) menu. Press or to select the item you want to adjust. Press or to adjust the setting. 1 2 3 Picture control adjustment After your desired setting, press EXIT to return to normal screen.
32 NOTES: • If the program or video you selected is not closed-captioned, no captions will display on-screen. • If text is not available in your viewing area, a black rectangle may appear on-screen. If this happens, set the Closed Caption feature to “ OFF ” .
33 ENGLISH CC advanced Closed Captions are factory preset however you can adjust them individually as follows: Press or to select (SETUP) menu. Press MENU . The menu screen will appear. 1 2 Press or to select “ CC ADV ANCED ” , then press . The CC ADV ANCED menu will appear .
34 Press or to select “ STR (Stereo) ” . Selecting Stereo/Second Audio Program (SAP)/ Selecting the digital output The multi-channel TV sound (MTS) feature provides high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language or other audio information.
35 ENGLISH Selecting the audio language/Resetting your audio adjustments Selecting the audio language When two or more audio languages are included in a digital signal, you can select one of the audio language. 1 2 3 Press MENU , then press or to select (AUDIO) menu.
36 NOTES: • Signal meter feature is not available for analog channels. • After 240 seconds, SIGNAL METER screen will return to normal TV -operation automatically . Checking the Digital-signal strength This unit will allow you to view the digital signal meter for digital channels.
37 ENGLISH T roubleshooting Use the following check list for troubleshooting when you have problems with your TV . Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. • Check all CABLE connections.
38 SPECIFICATIONS Power supply: AC 120V , 60Hz Power Consumption: Operation : 1 10 Watts Stand by : 3 W Weight: 77.2 lbs (35.0 kg) Dimensions: Width: 29-1/8 inches (740 mm) Height: 22-1/2 inches (571.5 mm) Depth: 19-1/4 inches (489.5 mm) Inputs: VIDEO: 1 V (p-p)/75 ohms AUDIO: – 8 dBm/50k ohms S-VIDEO: Y : 1 V (p-p), 75 ohms C: 0.
39 ENGLISH LIMITED W ARRANTY ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 12 months from date of original purchase in the United States only .
2 El s í mbolo del rayo dentro de un tri á ngulo equil á tero tiene por finalidad alertar al usuario de la presencia de tensi ó n peligrosa (sin aislamiento) en el interior del producto, que puede tener la intensidad suficiente como para constituir un riesgo de descarga el é ctrica.
3 ESP A Ñ OL EJEMPLO DE CONEXI Ó N A TIERRA DE LA ANTENA SEG Ú N EL C Ó DIGO NACIONAL DE ELECTRICIDAD ALAMBRE DE ENTRADA DE LA ANTENA UNIDAD DE DESCARGA DE LA ANTENA (NEC, SECCI Ó N 810-20) SISTE.
4 Soluci ó n de problemas ............................................................... 37 Especificaciones ........................................................................ 38 GARANTIA LIMITADA ..............................................
5 ESP A Ñ OL Caracter í sticas Imagen de alta calidad con una resoluci ó n horizontal de m á s de 500 l í neas. T iene una resoluci ó n superior a S ú per VHS (400 l í neas) y al Laser Disc (430 l í neas).
6 Partes y sus funciones Vista frontal Vista posterior * Para mostrar la pantalla del men ú . Pulse los botones VOLUME ▲ / ▼ al mismo tiempo para que aparezca la pantalla del men ú .
7 ESP A Ñ OL PICTURE SIZE –/ 9 1 2 3 4 5 6 7 8 10 12 11 13 14 15 16 4. Bot ó n SLEEP - Para hacer que el televisor se apague despu é s de un per í odo de tiempo prefijado, presione el bot ó n SLEEP del unidad de control remoto.
8 Si usted est á utilizando una antena para interiores ó exteriores, siga las instrucciones de abajo que correspondan a su sistema de antena. Si est á utilizando el servicio de TV cable (CABLE), vea la p á gina 9 para las conexiones de TV cable.
9 ESP A Ñ OL P ARA ABONADOS AL SERVICIO B Á SICO DE TV CABLE Para el servicio b á sico de cable y cuando no es necesario un convertidor/caja decodificadora, conecte el cable coaxial de 75 ohmios al jack de la antena en la parte posterior del aparato.
10 SOURCE SELECTION 0. ANT 1. VIDEO1 2. VIDEO2 3. COMPONENT /0-3 : SELECT Conexiones a otros equipos La instalaci ó n exacta a utilizar para hacer las conexiones de los distintos componentes de v í deo y audio en el TV depende del modelo y funciones de cada componente.
11 ESP A Ñ OL YP B P R YP B P R A salida de Audio Para conectar el televisor a un reproductor de DVD/receptor de sat é lite Si su reproductor de DVD o receptor de sat é lite dispone de un jack de salida de S-V í deo, conecte los cables como se muestra.
12 C ó mo utilizar un Amplificador A V con sonido digital integrado Si utiliza un amplificador con sonido envolvente digital integrado como el que aparece a continuaci ó n, puede disfrutar de los distintos sistemas de audio, incluyendo el audio con Dolby Surround que hasta ahora s ó lo se pod í a disfrutar en los cines.
13 ESP A Ñ OL JUDGO DE V Í DEO Conexiones a otros equipos (continuaci ó n) Para conectar la unidad a la videoc á mara Para reproducir de la videoc á mara, conecte la videoc á mara en el TV tal como se indica.
14 :SELECT ENTER : SET LANGUAGE / LANGUE / IDIOMA ENGLISH FRAN Ç AIS ESP A Ñ OL :SELECT ENTER : SET CHANNEL PLAN TV CABLE :SELECT ENTER : SET AUTO SETUP START CANCEL PICTURE SIZE -/ Configuraci ó n inicial 4 Comienza entonces el “ AUTO SETUP ” (configuraci ó n autom á tica).
15 ESP A Ñ OL SETUP LANGUAGE ENGLISH CLOCK SET TV/CABLE CABLE AUTO CH MEMORY ADD/DELETE :SELECT :ADJUST SETUP LANGUAGE ENGLISH ENGLISH / FRAN Ç AIS / ESPA Ñ OL CLOCK SET TV/CABLE CABLE AUTO CH MEMORY ADD/DELETE :SELECT :ADJUST PICTURE SIZE -/ 3 Presione o para seleccionar men ú de (SETUP).
16 SETUP LANGUAGE ENGLISH CLOCK SET TV/CABLE CABLE AUTO CH MEMORY ADD/DELETE :SELECT :ADJUST SETUP LANGUAGE ENGLISH CLOCK SET TV/CABLE TV/ CABLE AUTO CH MEMORY ADD/DELETE :SELECT :ADJUST SETUP LANGUAG.
17 ESP A Ñ OL SETUP LANGUAGE ENGLISH CLOCK SET TV/CABLE CABLE AUTO CH MEMORY ADD/DELETE :SELECT :ADJUST AUTO CH MEMORY EXIT : CANCEL PROGRAMMING NOW PLEASE WAIT SETUP LANGUAGE ENGLISH CLOCK SET TV/CA.
18 VOLUME 32 ANT ABCD 12 PICTURE SIZE -/ Operación del TV Para encender el aparato, presione POWER . Ajuste el modo TV/CABLE a la posición apropiada (V ea página 16). Ajuste el nivel de volumen presionando VOL + o VOL – . El nivel de volumen será indicado en la pantalla por medio de barras verdes.
19 ESP A Ñ OL ANT ABCD 12 MUTE SLEEP 2 h00m ANT ABCD 7 STEREO SAP TV-PG L V ON TIMER 8:30AM OFF TIMER 11:30PM SLEEP TIMER 2h00m ANT ABCD CABLE 7 CLOCK12:00AM MON 4:3 15-1 CH-1 Monoscope_4801_1 Remaining Time 0:20 TV-14 English No program information is available.
20 LOCKS NEW PASSWORD [0-9] : SELECT ENTER : SET EXIT : END LOCKS NEW PASSWORD [0-9] : SELECT ENTER : SET EXIT : END LOCKS CONFIRM PASSWORD [0-9] : SELECT ENTER : SET EXIT : END LOCKS V-CHIP SET LOCK FRONT PANEL LOCK NEW PASSWORD :SELECT :ADJUST PICTURE SIZE -/ Presione o para ver el modo de entrada de contrase ñ a.
21 ESP A Ñ OL LOCKS PASSWORD [0-9] : SELECT ENTER : SET EXIT : END LOCKS V-CHIP SET V-CHIP OFF TV RATING OFF OFF /T V -Y/T V -Y 7/T V - G TV-PG/ TV-14 / TV-MA MOVIE RATING OFF :SELECT :ADJUST LOCKS V.
22 LOCKS NEW PASSWORD [0-9] : SELECT ENTER : SET EXIT : END LOCKS CONFIRM PASSWORD [0-9] : SELECT ENTER : SET EXIT : END LOCKS PASSWORD [0-9] : SELECT ENTER : SET EXIT : END LOCKS LOCK CH LOCK VIDEO L.
23 ESP A Ñ OL Bloqueando los canales Presione o para resaltar CH LOCK y presione o para desplegar el men ú de CH LOCK. 4 1 Presione MENU , luego presione o para desplegar el men ú de (LOCKS). Use los botones de number (del 0 al 9) para desplegar el canal que desea bloquear .
24 Bloqueando la entrada de video 4 1 Presione o para desplegar el modo que entra de la contrase ñ a. Presione MENU , luego presione o para desplegar el men ú de (LOCKS). 3 Use los botones de Channel Number (del 0 al 9) para ingresar su contrase ñ a, luego presione ENTER .
25 ESP A Ñ OL LOCKS V-CHIP SET LOCK FRONT PANEL LOCK NEW PASSWORD :SELECT :ADJUST LOCKS PASSWORD [0-9] : SELECT ENTER : SET EXIT : END LOCKS LOCK CH LOCK VIDEO LOCK OFF FRONT PANEL LOCK ON /OFF NEW P.
26 OPTION ON / OFF TIMER OFF CH LABEL :SELECT :ADJUST CH LABEL : CH 23 SET / CLEAR LABEL –––– OPTION MENU :SELECT :ADJUST E N T E R : SE T EXIT : END CH LABEL : CH 23 SET LABEL A ––– OPTION MENU :ADJUST ENTER : SET EXIT : END PICTURE SIZE -/ Para asignar etiquetas a los canales Seleccione el canal que desea etiquetar.
27 ESP AÑOL SETUP LANGUAGE ENGLISH CLOCK SET TV/CABLE CABLE AUTO CH MEMORY ADD/DELETE :SELECT :ADJUST SETUP LANGUAGE ENGLISH CLOCK SET TV/CABLE CABLE AUTO CH MEMORY ADD/DELETE :SELECT :ADJUST CLOCK S.
28 OPTION ON / OFF TIMER ON / OFF / SET CH LABEL :SELECT :ADJUST OPTION ON / OFF TIMER ON / OFF / SET CH LABEL : SELECT : ADJUST ENTER : SET ON / OFF TIMER ON TIMER 12:00AM CH 1 CLEAR OFF TIMER 12:00A.
29 ESP A Ñ OL OPTION ON / OFF TIMER ON / OFF / SET CH LABEL : SELECT : ADJUST ENTER : SET ON / OFF TIMER ON TIMER 12:00AM CH 1 CLEAR OFF TIMER 12:00AM CLEAR OPTION MENU : SELECT : ADJUST EXIT : END O.
30 T ama ñ o 16:9 de la imagen Esta imagen mostrar á el tama ñ o est á ndar 16:9 con barras negras en la parte superior e inferior . Configuraci ó n del tama ñ o de la imagen T ama ñ o 4:3 de l.
31 ESP A Ñ OL PICTURE BRIGHTNESS 25 CONTRAST 50 COLOR 25 TINT 0 SHARPNESS 25 RESET : SELECT : ADJUST PICTURE BRIGHTNESS 25 CONTRAST 50 COLOR 25 TINT 0 SHARPNESS 25 RESET : SELECT : ADJUST PICTURE SIZE -/ NOT A: La funci ó n contraste se prejusta en f á brica m á ximo nivel.
32 SETUP CLOSED CAPTION OFF C1 / C2 /T1 / T2 / OFF CC ADVANCED SIGNAL METER : SELECT : ADJUST SETUP CLOSED CAPTION OFF CS1/CS2/CS3/CS4/CS5/CS6 C1/C2/C3/C4/T1/T2/T3/T4/ OFF CC ADVANCED SIGNAL METER : SELECT : ADJUST PICTURE SIZE -/ NOTAS: • Si el programa o el v í deo seleccionado no dispone de teletexto, no aparecer á texto en la pantalla.
33 ESP A Ñ OL SETUP CLOSED CAPTION OFF CC ADVANCED SIGNAL METER : SELECT : ADJUST SETUP LANGUAGE ENGLISH CLOCK SET TV/CABLE CABLE AUTO CH MEMORY ADD/DELETE :SELECT :ADJUST CC ADVANCED TEXT SIZE TEXT .
34 C ó mo seleccionar est é reo/Programa de Audio Secundario (SAP)/ C ó mo seleccionar la salida digital La funci ó n de sonido de televisi ó n multicanal (MTS) ofrece un sonido est é reo de alta fidelidad. MTS tambi é n puede transmitir un Programa de Audio Secundario (SAP) con un segundo idioma o informaci ó n de audio adicional.
35 ESP A Ñ OL AUDIO MTS STEREO AUDIO LANGUAGE DIGITAL OUTPUT PCM RESET : SELECT : ADJUST AUDIO MTS STEREO AUDIO LANGUAGE DIGITAL OUTPUT PCM RESET : SELECT : ADJUST AUDIO LANGUAGE 0. ENGLISH 1 1. ENGLISH 2 2. FRENCH 3. SPANISH 4. NO INFO 5. NO INFO 6.
36 SETUP LANGUAGE ENGLISH CLOCK SET TV/CABLE CABLE AUTO CH MEMORY ADD/DELETE :SELECT :ADJUST SIGNAL METER CHANNEL (DIGIT AL) 123-045 80% PICTURE SIZE -/ C ó mo comprobar la potencia de la se ñ al digital Puede ver el indicador de se ñ al digital. 1 2 3 Presione MENU , luego presione o para seleccionar men ú de (SETUP).
37 ESP A Ñ OL Soluci ó n de Problemas Utilice la siguiente lista de verificaci ó n de localizaci ó n de aver í as cuando tiene problemas con este TV. Consulte con su concesionario local ó tienda de servicio si contin ú an los problemas. Compruebe que se han hecho correctamente todas las conexiones cuando utilice con otros aparatos.
38 El dise ñ o y las especificaciones est á n sujetas a cambio sin aviso. Especificaciones Alimentaci ó n de CA: 120 V CA, 60 Hz Consumo de energ í a: En operaci ó n: 1 10 V atios Stand by: 3 V atios Peso: 77.
39 ESP A Ñ OL GARANTIA LIMIT ADA ORION garantiza este producto contra defectos en sus materiales o de fabricaci ó n, bajo condiciones normales de uso, por un per í odo de 12 meses a contar de la fecha de compra original, solamente en los Estados Unidos.
40 MEMO J3W40621B_SP_P35-42 15/02/2006, 10:53 AM 40.
41 ESP A Ñ OL MEMO J3W40621B_SP_P35-42 15/02/2006, 10:53 AM 41.
J3W40621B SH 06/03 N J3W40621B_SP_P35-42 15/02/2006, 10:53 AM 42.
An important point after buying a device ILO DTV2784 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ILO DTV2784 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ILO DTV2784 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ILO DTV2784 you will learn all the available features of the product, as well as information on its operation. The information that you get ILO DTV2784 will certainly help you make a decision on the purchase.
If you already are a holder of ILO DTV2784, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ILO DTV2784.
However, one of the most important roles played by the user manual is to help in solving problems with ILO DTV2784. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ILO DTV2784 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
