Instruction/ maintenance manual of the product ProLite T2234MC-B1X Iiyama
Go to page of 26
ENGLISH Thank you very much for choosing the iiyama LCD monitor . We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor . Please keep this manual in a safe place for your future reference.
ENGLISH.
ENGLISH We reserve the right to change speci fi cations without notice. All trademarks used in this user manual are the property of their respective owners. We recommend recycling of used product. Please contact your dealer or iiyama service center .
ENGLISH T ABLE OF CONTENTS FOR YOUR SAFETY ............................................................................ 1 SAFETY PRECAUTIONS................................................................ 1 SPECIAL NOTES ON LCD MONITORS ..............
ENGLISH FOR YOUR SAFETY 1 FOR YOUR SAFETY W ARNING STOP OPERA TING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately .
ENGLISH 2 FOR YOUR SAFETY CAUTION INST ALLA TION LOCA TION Do not install the monitor where sudden temperature changes may occur , or in humid, dusty or smoky areas as it may cause fi re, electric shock or damage. Y ou should also avoid areas where the sun shines directly on the monitor .
ENGLISH FOR YOUR SAFETY 3 The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE When you fi rst turn on the LCD monitor , the picture may not fi t in the display area because of the type of computer that is used.
ENGLISH 4 BEFORE YOU OPERA TE THE MONITOR The following accessories are included in your package. Check to see if they are enclosed with the monitor . If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama of fi ce.
ENGLISH BEFORE YOU OPERA TE THE MONITOR 5 When you use with the wall mounting, in consideration of thickness of the mounting stage, tighten the M4 Screw with washer which “L” length is 8mm to fasten the monitor .
ENGLISH 6 BEFORE YOU OPERA TE THE MONITOR CONTROLS AND CONNECTORS Menu Button (MENU)* Scroll Up / Brightness Button ( )* Scroll Down / Contrast Button ( )* Select / Auto Button (SELECT)* Power Switch .
ENGLISH BEFORE YOU OPERA TE THE MONITOR 7 CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the computer to the monitor with the USB Cable. Connect the monitor cable to the Remote Control OSD key (option), if necessary.
ENGLISH 8 BEFORE YOU OPERA TE THE MONITOR [Collect Cables] Put the cables through the cable holes. Collect cables at the back of the stand. Cable Hole [Fitting and Removal of Cable Cover] Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
ENGLISH BEFORE YOU OPERA TE THE MONITOR 9 ADJUSTING THE VIEWING ANGLE For optimal viewing it is recommended to look at the full face of the monitor . Hold the panel so that the monitor does not topple when you change the monitor ’s angle. Y ou are able to adjust the monitor’s angle up to 90 degrees upward, 5 degrees downward.
ENGLISH 10 OPERA TING THE MONITOR OPERA TING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 22. Y ou are also able to adjust the picture by following the button operation shown below .
ENGLISH OPERA TING THE MONITOR 1 1 ADJUSTMENT MENU CONTENTS Adjustment Item Problem / Option Button to Press T oo dark T oo bright BRIGHTNESS * CONTRAST T oo dull T oo intense * Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.
ENGLISH 12 OPERA TING THE MONITOR Adjustment Item Problem / Option Button to Press FINE * 2 H-SIZE * 2 T oo left T oo right T oo low T oo high H-POSITION V -POSITION T oo narrow T oo wide T o correct fl ickering text or lines AUTO ADJUST H-POSITION V -POSITION H-SIZE FINE AUTO ADJUST * 1 Adjust H/V -POSITION, H-SIZE and FINE automatically .
ENGLISH OPERA TING THE MONITOR 13 OSD H-POSITION OSD V -POSITION OSD TIMEOUT RESET INPUT SELECT OSD TIMEOUT OSD H-POSITION OSD is too left OSD is too right OSD is too low OSD is too high Y ou can set the OSD display duration time between 5 and 60 seconds.
ENGLISH 14 OPERA TING THE MONITOR 9300 6500 5500 7500 USER RED GREEN BLUE 94 90 100 Adjustment Item Problem / Option Button to Press Greenish white Y ellowish white GREEN RED T oo weak T oo strong USER Reddish white Bluish white 9300 COLOR TEMP .
ENGLISH OPERA TING THE MONITOR 15 SCREEN ADJUSTMENTS The screen adjustments described in this manual are designed to set image position and minimize fl icker or blur for the particular computer in use.
ENGLISH 16 OPERA TING THE MONITOR F 1) Adjust the H-POSITION so that the left side of the picture frame will move to the left edge of the display area. When the left side of the picture frame moves apart from the left edge of the display area during the H-SIZE adjustment, adjust steps 1) and 2).
ENGLISH OPERA TING THE MONITOR 17 In case the strong fl icker or blurs remain on a part of the screen, repeat steps F and G because the H-SIZE may not be adjusted correctly . If the fl icker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again.
ENGLISH 18 OPERA TING THE MONITOR Even when using the power management mode, the monitor consumes electricity . Turn off the Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consumption.
ENGLISH TROUBLE SHOOTING 19 The screen is not synchronized. The Signal Cable is properly connected. The signal timing of the computer is within the speci fi cation of the monitor . The video output level of the c omputer is within th e speci fi c ation of the monitor .
ENGLISH 20 Recycling information For better environment protection please don't dispose your monitor . Please visit our web site: www .iiyama.com/recycle for monitor recycling.
ENGLISH APPENDIX 21 APPENDIX Design and speci fi cations are subject to change without prior notice. SPECIFICA TIONS LCD Panel Driving system a-Si TFT Active Matrix 0.247mm H × 0.247mm V Response time Pixel pitch 8ms (Gray to Gray T ypical) Display Colors Approx.
ENGLISH 22 APPENDIX DIMENSIONS M087G21 COMPLIANT TIMING Dot Clock 25,175MHz 31,500MHz 31,500MHz 36,000MHz 40,000MHz 49,500MHz 50,000MHz 65,000MHz 75,000MHz 78,750MHz 108,000MHz 135,000MHz 106,500MHz 1.
An important point after buying a device Iiyama ProLite T2234MC-B1X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Iiyama ProLite T2234MC-B1X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Iiyama ProLite T2234MC-B1X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Iiyama ProLite T2234MC-B1X you will learn all the available features of the product, as well as information on its operation. The information that you get Iiyama ProLite T2234MC-B1X will certainly help you make a decision on the purchase.
If you already are a holder of Iiyama ProLite T2234MC-B1X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Iiyama ProLite T2234MC-B1X.
However, one of the most important roles played by the user manual is to help in solving problems with Iiyama ProLite T2234MC-B1X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Iiyama ProLite T2234MC-B1X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
