Instruction/ maintenance manual of the product ProLite P1905S-2 Iiyama
Go to page of 31
DEUTSCH FRANCAIS ENGLISH USER MANUAL Thank you very much for choosing the iiyama LCD monitor . We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor . Please keep this manual in a safe place for your future reference.
ENGLISH.
ENGLISH We reserve the right to change speci fi cations without notice. All trademarks used in this user manual are the property of their respective owners. As an ENERGY ST AR ® Partner , iiyama has determined that this product meets the ENERGY ST AR ® guidelines for energy ef fi ciency .
ENGLISH FOR YOUR SAFETY .............................................................................................. 1 SAFETY PRECAUTIONS ................................................................................ 1 SPECIAL NOTES ON LCD MONITORS .
ENGLISH.
ENGLISH 1 FOR YOUR SAFETY FOR YOUR SAFETY W ARNING STOP OPERA TING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately .
ENGLISH CAUTION INST ALLA TION LOCA TION Do not install the monitor where sudden temperature changes may occur , or in humid, dusty or smoky areas as it may cause fi re, electric shock or damage. Y ou should also avoid areas where the sun shines directly on the monitor .
ENGLISH The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE When you fi rst turn on the LCD monitor , the picture may not fi t in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position.
ENGLISH The following accessories are included in your package. Check to see if they are enclosed with the monitor . If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama of fi ce. * The rating of the Power Cable enclosed in 120V area is 10A/125V .
ENGLISH 5 BEFORE YOU OPERA TE THE MONITOR Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor . It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage.
ENGLISH Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor . It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage.
ENGLISH CONTROLS AND CONNECTORS <Front> <Back> 7 BEFORE YOU OPERA TE THE MONITOR Power Switch ( ) / Power Indicator Blue: Normal operation Orange: Power Management The monitor enters into power management mode which reduces the power consumption to less than 1W when receiving no horizontal and/or vertical sync signal.
ENGLISH CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features.
ENGLISH Signal Timing Change to the desired signal timing listed on page 26: COMPLIANT TIMING. Windows 95/98/2000/Me/XP/Vista/7 Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard.
ENGLISH BEFORE YOU OPERA TE THE MONITOR 10 ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite PB1705S For optimal viewing it is recommended to position yourself directly opposite the full face of the monitor , then adjust the monitor ’s height and angle to your own preference.
ENGLISH 1 1 OPERA TING THE MONITOR OPERA TING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 26. Y ou are also able to adjust the picture by following the button operation shown below .
ENGLISH OPERA TING THE MONITOR 12 ADJUSTMENT MENU CONTENTS Y ou can skip the Menu items and display an adjustment scale directly by using the following button operations. Auto Image Adjust : Press the 2 Button when the Menu is not displayed. Direct * For best results, use the Auto Image Adjust in conjunction with the adjustment pattern.
ENGLISH Adjustment Item Problem / Option Button to Press Color Adjust Cool Bluish white (9300K) Green Red Blue T oo weak T oo strong User Color 13 OPERA TING THE MONITOR Input Select When only one of the two signal inputs is connected to the signal source, the one connected is automatically selected.
ENGLISH Adjustment Item Problem / Option Button to Press Setup Menu Language Select English Deutsch English German Français French Finnish Simpli fi ed Chinese Italiano Italian T raditional Chinese .
ENGLISH Direct Y ou can display an adjustment scale directly by using the following button operations. KEY LOCK (OSD and POWER SWITCH) : Lock : Press the 1 Button and Button and hold down for 10 seconds. Unlock : Press the 1 Button and Button and hold down for 10 seconds.
ENGLISH SCREEN ADJUSTMENTS The screen adjustments described in this manual are designed to set image position and minimize fl icker or blur for the particular computer in use.
ENGLISH 17 OPERA TING THE MONITOR 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area. NOTE When the left side of the picture frame moves apart from the left edge of the display area during the Horizontal Size adjustment, adjust steps 1) and 2).
ENGLISH NOTE In case the strong fl icker or blurs remain on a part of the screen, repeat steps and because the Horizontal Size may not be adjusted correctly . If the fl icker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from again.
ENGLISH Even when using the power management mode, the monitor consumes electricity . Turn off the Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consumption. NOTE It is possible that the video signal from the computer may be on while the H or V sync signal is missing.
ENGLISH TROUBLE SHOOTING 20 TROUBLE SHOOTING Perform the adjustments described in OPERA TING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot fi nd an appropriate adjustment item in OPERA TING THE MONITOR or if the problem persists.
ENGLISH Problem Check No sound. The Audio Cable is properly connected. The audio equipment (computer etc.) is ON. The V olume is turned up. The Mute is OFF . The sound is too loud or too quiet. The audio output level of the audio equipment is within the speci fi cation of the monitor .
ENGLISH APPENDIX 22 SPECIFICA TIONS : ProLite P1705S APPENDIX Design and speci fi cations are subject to change without prior notice. LCD Panel Driving system a-Si TFT Active Matrix 0.264mm H × 0.264mm V Response time Pixel pitch 5ms (Black, White, Black) Display Colors Approx.
ENGLISH SPECIFICA TIONS : ProLite PB1705S LCD Panel Driving system a-Si TFT Active Matrix 0.264mm H × 0.264mm V Response time Pixel pitch 5ms (Black, White, Black) Display Colors Approx.16.7M Sync Frequency Horizontal: 31.0-81.0kHz, V ertical: 56-75Hz Maximum Resolution 1280 × 1024, 1.
ENGLISH APPENDIX 24 SPECIFICA TIONS : ProLite P1905S LCD Panel Driving system a-Si TFT Active Matrix 0.294mm H × 0.294mm V Response time Pixel pitch 5ms (Black, White, Black) Display Colors Approx.16.7M Sync Frequency Horizontal: 31.0-81.0kHz, V ertical: 56-75Hz Maximum Resolution 1280 × 1024, 1.
ENGLISH DIMENSIONS : ProLite P1705S DIMENSIONS : ProLite PB1705S DIMENSIONS : ProLite P1905S ( ): Maximum adjustment range 25 APPENDIX 403.0mm/15.9" (483.0mm/19.0") 328.5mm/12.9" 272.0mm/10.7" 175.0mm/6.89" 59.5mm/2.34" 210.
ENGLISH APPENDIX 26 M063C21 COMPLIANT TIMING Dot Clock 25.175MHz 31.500MHz 31.500MHz 36.000MHz 40.000MHz 50.000MHz 49.500MHz 65.000MHz 75.000MHz 78.750MHz 108.000MHz 135.000MHz 28.322MHz 30.240MHz 57.283MHz V ertical Frequency 59.940Hz 75.000Hz 72.809Hz 56.
An important point after buying a device Iiyama ProLite P1905S-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Iiyama ProLite P1905S-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Iiyama ProLite P1905S-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Iiyama ProLite P1905S-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Iiyama ProLite P1905S-2 will certainly help you make a decision on the purchase.
If you already are a holder of Iiyama ProLite P1905S-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Iiyama ProLite P1905S-2.
However, one of the most important roles played by the user manual is to help in solving problems with Iiyama ProLite P1905S-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Iiyama ProLite P1905S-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
