Instruction/ maintenance manual of the product H511S Iiyama
Go to page of 33
USER MANUAL Thank you very much for choosing the iiyama LCD monitor . We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor . Please keep this manual in a safe place for your future reference.
ENGLISH Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world.
ENGLISH Congratulations! Y ou have just purchased a TCO’99 approved and labelled product! Y our choice has provided you with a product developed for professional use. Y our purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
ENGLISH Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances.
ENGLISH FCC DECLARA TION OF CONFORMITY Model Number: PLH51 1S Trade Name: iiyama Responsible party: IIY AMA North America, Inc. Address: 65 West S treet Road, Suite 101B, Warminster , P A18974 U.S.A. T elephone number: 215-682-9050 This device complies with Part 15 of the FCC Rules.
ENGLISH FOR YOUR SAFETY .............................................................................. 1 SAFETY PRECAUTIONS ................................................................. 1 SPECIAL NOTES ON LCD MONITORS .............................
ENGLISH FOR YOUR SAFETY W ARNING ST OP OPERA TING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately . Further use may be dangerous and can cause fire or electric shock.
ENGLISH 2 FOR YOUR SAFETY CAUTION INST ALLA TION LOCA TION Do not install the monitor where sudden temperature changes may occur , or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. Y ou should also avoid areas where the sun shines directly on the monitor .
ENGLISH The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE When you first turn on the LCD monitor , the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position.
ENGLISH 4 BEFORE YOU OPERA TE THE MONITOR BEFORE YOU OPERA TE THE MONIT OR The monitor functions as a hub when connected to a USB compliant computer and USB peripherals. However , with older operating systems and/or BIOS settings in your computer , the USB hub may not operate.
ENGLISH FEA TURES 51cm (20.1") TFT Color LCD Monitor Supports Resolutions up to 1600 × 1200 High Contrast 400:1 / High Brightness 250cd/m 2 /Quick Response Time 16ms 17.
ENGLISH Optional parts as below are available for your LCD monitor . Please contact your local iiyama dealer or regional iiyama office for more details. The Protection Sheet may be attached to the LCD panel surface to protect it from stains or scratches.
ENGLISH A Power Switch / Power Indicator (POWER) Green: Normal operation (ProLite H51 1S) Blue: Normal operation (ProLite H51 1S-B) Orange: Power Management The monitor enters into power management mode which reduces the power consumption to less than 5W when receiving no horizontal and/or vertical sync signal.
ENGLISH Power Cable (Accessory) Audio Cable (Accessory) Computer D-Sub Signal Cable (Accessory) DVI-D Signal Cable CONNECTING YOUR MONITOR [Example of Connection] A Ensure that both the computer and the monitor are switched off. B Connect the computer to the monitor with the signal cable.
ENGLISH BEFORE YOU OPERA TE THE MONIT OR 9 COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 26: COMPLIANT TIMING . Windows 95/98/2000/Me/XP Plug & Play The iiyama LCD monitor complies with DDC1/2B of VESA standard.
ENGLISH ADJUSTING THE HEIGHT AND THE VIEWING ANGLE For optimal viewing it is recommended to look at the full face of the monitor , then adjust the monitor's Height and angle to your own preference. Hold the stand so that the monitor does not topple when you change the monitor’s angle.
ENGLISH OPERA TING THE MONIT OR T o create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 26. Y ou are also able to adjust the picture by following the button operation shown below . For more detailed adjustments, see page 19 for SCREEN ADJUSTMENTS.
ENGLISH 12 OPERA TING THE MONITOR ADJUSTMENT MENU CONTENTS Adjustment Item Problem / Option Button to Press T oo dark T oo bright Brightness * 1 Contrast T oo dull T oo intense T o correct flickering .
ENGLISH Menu : 2 (Analog) On Problem / Option Button to Press Adjustment Item Color T emp. Bluish white Sharpness 1 2 3 4 5 Adjust the picture quality at resolutions of less than 160 0× 12 0 0. Y ou can change the picture quality from 1 to 5 (sharp to soft).
ENGLISH 14 OPERA TING THE MONIT OR Menu : 2 (Analog) Return to Menu Highlight “Menu : 2” again. Off Mode1 High contrast Dark Gamma Mode1 Brightness of back-light is reduced.
ENGLISH Menu : 3 (Analog) O f f Lockout is canceled. Japanese Adjustment Item Problem / Option Button to Press OSD Position 1 2 3 4 5 Y ou can move the OSD display area to any one of the following 5 p.
ENGLISH 16 OPERA TING THE MONIT OR G R B Menu : 1 (Digital) Digital Input Adjustment Item Problem / Option Button to Press T oo dark T oo bright Brightness * 1 Contrast T oo dull T oo intense * 1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.
ENGLISH Economy Mode: When OSD menu is off, holding the Menu button for 1-2 seconds will toggle the Economy Mode switch Off, Mode1 and Mode2. Direct Y ou can skip the Menu pages and display an adjustment scale directly by using the following button operations.
ENGLISH 18 OPERA TING THE MONIT OR Menu : 2 (Digital) O f f Lockout is canceled. Japanese Adjustment Item Problem / Option Button to Press OSD Position 1 2 3 4 5 Y ou can move the OSD display area to .
ENGLISH OPERA TING THE MONITOR 19 SCREEN ADJUSTMENTS The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use.
ENGLISH 20 OPERA TING THE MONIT OR + – F F F F F 1) Adjust the H-Position so that the left side of the picture frame will move to the left edge of the display area. NOTE When the left side of the picture frame moves apart from the left edge of the display area during the Clock adjustment, adjust steps 1) and 2).
ENGLISH OPERA TING THE MONITOR 21 NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps F and G because the Clock may not be adjusted correctly . If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again.
ENGLISH 22 OPERA TING THE MONIT OR Even when using the power management mode, the monitor consumes electricity . T urn off the Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consumption.
ENGLISH TROUBLE SHOOTING Perform the adjustments described in OPERA TING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERA TING THE MONITOR or if the problem persists.
ENGLISH 24 TROUBLE SHOOTING Problem Check No sound. The Audio Cable is properly connected. The audio output level of the audio equipment is within the specification of the monitor . F The audio equipment (computer etc.) is ON. The V olume is turned up.
ENGLISH SPECIFICA TIONS APPENDIX LCD Panel Size Driving system a-Si TFT Active Matrix Diagonal: 51cm / 20.1" 0.255mm H × 0.255mm V Response time Pixel pitch 16ms (Black, white, black) Display Colors 16,777,216 maximum Sync Frequency Dot Clock 162MHz maximum Maximum Resolution 1600 × 1200, 1.
ENGLISH 446mm/17.6" 410.5mm/16.2" 308.5mm/12.1" 375mm/14.8" 70mm/2.8" 391.5mm/15.4" (501.5mm/19.7") 242mm/9.5" 236.5mm/9.3" 300.5mm/11.8" 26 APPENDIX COMPLIANT TIMING * DVI input is not compliant. NOTE DIMENSIONS Video Mode * * * * * Dot Clock 25.
ENGLISH 11 1 Input Signal CONNECTOR PIN ASSIGNMENT D-Sub mini 15pin Connector 3 Red video 8 Pin 2 4 5 6 7 Pin Blue video Green video ground Blue video ground 9 10 12 13 Ground Input Signal V -Sync 15 14 Red video ground Data line (SDA)* Clock line (SCL)* * Compliant to VESA DDC.
An important point after buying a device Iiyama H511S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Iiyama H511S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Iiyama H511S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Iiyama H511S you will learn all the available features of the product, as well as information on its operation. The information that you get Iiyama H511S will certainly help you make a decision on the purchase.
If you already are a holder of Iiyama H511S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Iiyama H511S.
However, one of the most important roles played by the user manual is to help in solving problems with Iiyama H511S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Iiyama H511S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
