Instruction/ maintenance manual of the product IDEAL 5009-2 IDEAL INDUSTRIES
Go to page of 16
1 Operating Instructions Modular conveyor belt system IDEAL 5009-1 IDEAL 5009-2.
2 IDEAL 5009-1 • IDEAL 5009-2.
3 T able of content s 1. General ....................................................... 4 1.1 Safety Instructions ...................................... 4 1.2 Application ................................................... 4 2. Installation .........
4 IDEAL 5009-1 • IDEAL 5009-2 25 1. General This instruction manual is meant to help you to operate the machine easily and safely . Please read these operating instructions before putting the machine into operation and observe the safety regulations.
5 780 mm 660 mm 32 “ 27 “ 15-01 23 1 2 2. Inst allation The machine is mobile on castors. The machine must be installed on a sturdy , dry and level floor . Danger! - The machine must not be used out side. - Do not use in the vicinity of flammable liquids or gases.
6 IDEAL 5009-1 • IDEAL 5009-2 26-01 23-01 1 23-02 2 2.2 Preparing for inst allation - Open the door . - Remove the transport safety device (1) and keep for later use. - Mount the supporting screws (3). - Screw down the supporting screws until the rear castors are balanced.
7 33-01 27 31-01 30-01 4 5 - Remove the springs from the ball-ends (4) on both sides. - Dismount the tie-bar (5). - Push the slide to the back - Push back the conveyor belt into the machine.
8 IDEAL 5009-1 • IDEAL 5009-2 06-01 2.3 Power supply The rating plate is located at the rear of the machine. - Data stated on the rating plate - V o lt age “V“, - Frequency “Hz“, - Power consumption “A“ must correspond to the values of the power supply unit.
9 25 05-01 1 2 3 4 5 6 7 8 06-04 15 15 11 1 1 8 32-01 15 15 3. Operation Danger! - When the main switch is switched on do not use steps or anything similar when operating or repairing the machine. - The machine may only be operated by persons who have read and understood the operating instructions.
10 IDEAL 5009-1 • IDEAL 5009-2 05-02 2 7 8 7 05-04 05-05 9 2 4 6 When large amounts of paper are inserted the machine automatically adjust s to a more powerful, slower capacity . If this capacity is still not powerful enough the machine will reverse shortly and then return to the forwards mode.
11 26-01 10 10 12 12 26-03 06-06 13 13 14 14 3.4 Replacing the plastic bag Replace bag when “bag full“ indicator illuminates. - Open the door (10). - Pull out the waste cart. - Remove the round belt (12) from the waste bag frame. - Pull the bag onto a pallet.
12 IDEAL 5009-1 • IDEAL 5009-2 05-03 5 7 9 2 4. T rouble shooting Danger! Disconnect from the mains before starting any service work or before removing the cover . Malfunction: S tandby (5) is not lighting up. Cause: - Main switch is OFF - Emergency button is pressed.
13 05-03 5 7 9 2 Malfunction: Machine switches of f during normal operation. Cause: Indicator for “bag full“ or “shred bag full“ illuminates. Remedy: Renew plastic bag. Cause: Y ellow pilot light (7) illuminates, machine is overheated. Remedy: W ait approx.
14 IDEAL 5009-1 • IDEAL 5009-2 9000 595 9000 593 9000 591 9000 597 WWW Service @krug-priester .com 5. Accessories Plastic bags 350l (50 pieces) ................ 9000 414 Environmentally friendly oil 10 x 0,2 l .... 9000 610 Module conveyor belt system (conveyor belt) .
15 EG-KONFORMITÄTSERKLÄRUNG EC-declaration of conformity Déclaration de conformité CE Declaración CE de conformidad Dichiarazione CE di conformità EG-verklaring van overeenstemming Declaraçao C.
16 IDEAL 5009-1 • IDEAL 5009-2 B5009_3e.pmd 03/2003 IDEAL Krug & P riester 72336 Ba lingen Germany w ww .ideal.de.
An important point after buying a device IDEAL INDUSTRIES IDEAL 5009-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought IDEAL INDUSTRIES IDEAL 5009-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data IDEAL INDUSTRIES IDEAL 5009-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, IDEAL INDUSTRIES IDEAL 5009-2 you will learn all the available features of the product, as well as information on its operation. The information that you get IDEAL INDUSTRIES IDEAL 5009-2 will certainly help you make a decision on the purchase.
If you already are a holder of IDEAL INDUSTRIES IDEAL 5009-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime IDEAL INDUSTRIES IDEAL 5009-2.
However, one of the most important roles played by the user manual is to help in solving problems with IDEAL INDUSTRIES IDEAL 5009-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device IDEAL INDUSTRIES IDEAL 5009-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
