Instruction/ maintenance manual of the product I-7531 ICP DAS USA
Go to page of 4
i-7531 CAN Repea ter Quick Start User Guide (ver. 1.3, 2008/03/25) --- -- 1 Quick Start User G uide 1. Introduction This user guide de scribes how to implement the i-7531 module into users’ applications in a quick and easy w ay. Therefore, it only provides the basic concepts.
i-7531 CAN Repea ter Quick Start User Guide (ver. 1.3, 2008/03/25) --- -- 2 2. Hard w are Structure When the i- 7531 is turned o n, the status LED w ill be d isplay w ith red light. Mo reover, when a message pas ses thr ough i-7 531, t he st atus LED will be twinkle onc e with y ellow light while the red l ight is still on.
i-7531 CAN Repea ter Quick Start User Guide (ver. 1.3, 2008/03/25) --- -- 3 3. Terminator Resistor Setting According to the IS O 11898 spe cifications, the CAN bus netw ork must be terminated by one terminal res istor on each end of CAN bus f or proper operation.
i-7531 CAN Repea ter Quick Start User Guide (ver. 1.3, 2008/03/25) --- -- 4 CAN DEVICE CAN_H CAN_L Power GND +10V DC ~ +30V DC CAN Port 2 CAN Port 1 CAN_H CAN_L CAN_GND 3 CAN_GND Earth Ground 1 5 6 9 .
An important point after buying a device ICP DAS USA I-7531 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ICP DAS USA I-7531 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ICP DAS USA I-7531 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ICP DAS USA I-7531 you will learn all the available features of the product, as well as information on its operation. The information that you get ICP DAS USA I-7531 will certainly help you make a decision on the purchase.
If you already are a holder of ICP DAS USA I-7531, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ICP DAS USA I-7531.
However, one of the most important roles played by the user manual is to help in solving problems with ICP DAS USA I-7531. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ICP DAS USA I-7531 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
