Instruction/ maintenance manual of the product IC-FR6100 Icom
Go to page of 16
INSTR UCTION MANU AL VHF FM REPEA TER iFR5100 iFR6100 UHF FM REPEA TER.
IMPOR T ANT READ THIS INSTRUCTION MANU AL CAREFULL Y before attempting to operate the re- peater . SA VE THIS INSTRUCTION MANU AL– T his manual contains impor tant safety and operating in- structions for the IC-FR5100/IC-FR6100 vhf/uhf fm repea ters .
ii FOR W ARD Thank you for purchasing this Icom repeater . The IC-FR5100/IC-FR6100 vhf/uhf fm repea ters is d e- signed and b uilt with Icom’ s state of the ar t technol- ogy and craftsmanship. With proper care , this product should provide you with y ears of trouble-free opera- tion.
1 P ANEL DESCRIPTION 2001 NEW 1 q INTERNAL SPEAKER Monitors received signals. w V OLUME CONTROL [V OLUME] (p. 7) Adjusts the audio output le vel. e SELECT OR DIAL [SELECT] Rotate to adjust the squelch threshold le vel, select the operating channel. (Depending on the pre- programmed condition.
q EXTERNAL SPEAKER CONNECT OR [SP] Connect the optional SP-22. w RECEIVE ANTENNA CONNECT OR [RX] Connects a receive antenna (impedance: 50 ˘ ) and inputs receiving signals. e ACCESSOR Y CONNECTOR [A CC] Connects to the accessor y connector . • See pgs .
3 1 P ANEL DESCRIPTION D Accessory connector q !3 !4 @5 Specification Description Pin Name Pin No. NC TXD RXD R TS CTS NC GND MOD IN DISC OUT EXT . D/A VCC EXT . A/D NC GND EXT .I/O 15 EXT .I/O 16 EXT .I/O 17 EXT .I/O 18 EXT .I/O 19 D A T A IN EXT .I/O 21 AF OUT EXT .
2 4 INST ALLA TION AND CONNECTIONS n Unpac king After unpacking, immediately repor t any damage to the delivering carr ier or dealer . K eep the shipping car- tons. F or a description and a diagram of accessor y equip- ment included with the repeater , see ‘SUPPLIED AC- CESSORIES’ on p .
n Fr ont panel connection P 0 P 1 P 2 P 3 P 4 SM-25 DESKT OP MICROPHONE (optional) MICROPHONE CONNECT OR (F ront panel view) HM-152 HAND MICROPHONE (optional) q i CA UTION: DO NO T shor t pin 1 to ground as this can damage the internal 8 V regulator .
6 2 INST ALLA TION AND CONNECTIONS n P ower suppl y connection Make sure the repeater’ s power is tur ned OFF when connecting a DC power cab le. CA UTION: V oltages g reater than 16 V DC will dam- age the repeater . Check the source v oltage before connecting the power cab le.
n Receiving and transmitting D Repeater operation Ask your dealer for details of the repeater’ s program- ming. ➥ When the power is tur ned ON, the [PWR] indicator lights green. (p . 1) ➥ T he [TX] a nd [BUSY] indicators light simultane - ously while transmitting/receiving a signal.
4 8 MAINTENANCE PROBLEM POSSIBLE CA USE SOLUTION REF . n T r oubleshooting The follo wing char t is designed to help correct prob - lems which are not equipment malfunctions. If you are unable to locate the cause of a problem or solv e it through the use of this chart, contact the near- est Icom Dealer or Ser vice Center .
5 9 OPTIONS • SP-22 external speaker Compact and easy-to-install. Input impedance : 4 ˘ Max. input power : 5 W • HM-152 hand microphone • SM-25 deskt op microphone • UR-FR5100/UR-FR6100 channel extensi on modules • UT -109R v oice scrambler unit Non-rolling type (max.
6 10 ABOUT CE INST ALLA TION NO TES • Compliance of base station transmitter installa - tions with EN50385 The installation of this equipment and it’ s associated antenna should be made in such a manner as to re- spect the EC recommended electromagnetic (EM) field e xposure limits.
11 6 ABOUT CE • T ypical installation example A UHF base station transmitter is to be installed on the roof of an office. T h e t r a n s m i t p o w e r i s 2 5 w a t t s , t h e r e i s 2 0 m o f RG-213 coaxial cab le and the antenna is v er tically polarised dipole.
12 6 ABOUT CE DECLARA TION OF CONFORMITY W e Icom Inc. Japan 1-1-32, Kamiminami, Hirano-ku Osaka 547-0003, Japan Kind of equipment: UHF REPEA TER T ype-designation: iC-fr6100/ur-fr6100 Signature Autho.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, J apan < Intended Country of Use > A T FI IT PL GB RO BE FR L V PT IS TR CY DE L T SK LI HR CZ GR LU SI NO DK HU MT ES CH EE IE NL SE BG A-6636H-1EU- w Printed in Japan © 2008 Icom Inc. Printed on recycle paper with soy ink.
An important point after buying a device Icom IC-FR6100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Icom IC-FR6100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Icom IC-FR6100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Icom IC-FR6100 you will learn all the available features of the product, as well as information on its operation. The information that you get Icom IC-FR6100 will certainly help you make a decision on the purchase.
If you already are a holder of Icom IC-FR6100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Icom IC-FR6100.
However, one of the most important roles played by the user manual is to help in solving problems with Icom IC-FR6100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Icom IC-FR6100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
