Instruction/ maintenance manual of the product IC-7200 Icom
Go to page of 19
When the transceiv er is connected to a PC with the USB cable , the f ollowing operations can be performed; • Remote control operation (CI-V : Icom Communica- tion Interf ace-V) by the PC . • Modulation input from the PC. • Received audio output to the PC .
2 PROCEDURE Ref er to the f ollowing steps f or the USB driver installation. Bef ore installing the USB driver , log in as the administrator and quit all applications when Windows is run- ning. Overview • System requirements (p . 1) • Item requirements (p .
3 Before installing the USB driver Icom HP giv es the USB driver download service. Bef ore installing the USB driver , download the f ollow- ing compressed file. • USB dr iver (File name: 7200UsbDrv_v100.zip) Icom is not responsible f or any damage or lack of data resulting from the use of the USB driver .
4 Windows Vista DRIVER INST ALLA TION The displa yed dialogue bo x es, indications or oper- ations ma y differ slightly from the following instr uc- tions according to y our system conditions or envi- ronment. q Make sure that the transceiver is not connected to the PC .
5 o After restar ting the PC, connect the transceiver to the PC with the USB cable (third party) as shown below . • Be sure to connect the USB cable correctly and not up- side down. T ransceiver PC USB cable (third par ty) T o USB jack T o USB por t Type A Type B ACC K E Y SEN D AL C REM OT E !0 T urn the transceiver power ON.
6 The displa yed dialogue bo x es, indications or oper- ations ma y differ slightly from the following instr uc- tions according to y our system conditions or envi- ronment. q Make sure that the transceiver is not connected to the PC . w Star t up Windows.
7 Windows XP (Contin ued) DRIVER INST ALLA TION i Select the “Win” f older, then click [OK]. • The folder construction: “7200UsbDrv_v100” ➞ “Driver” ➞ “Win” Click Select o Clic k [Ne xt>]. Click !0 The Wizard star ts searching f or the driver and shows the dialogue below during search.
8 !6 Select “Install from a list or specific location (Adv anced), ” then click [Ne xt>]. Click Select !7 Select “Search f or the best driv er in these locations . ” then select “Include this location in the search:”, and click [Browse].
9 The displa yed dialogue bo x es, indications or oper- ations ma y differ slightly from the following instr uc- tions according to y our system conditions or envi- ronment. q Make sure that the transceiver is not connected to the PC . w Star t up Windows.
10 Windows 2000 (Continued) DRIVER INST ALLA TION o Select “slabb us.inf” in the “Win” folder , then click [Open]. • The folder construction: “7200UsbDrv_v100” ➞ “Driver” ➞ “Win” Select “slabbus .inf ” Click !0 Clic k [OK].
11 Windows 2000 (Continued) DRIVER INST ALLA TION !6 Clic k [Browse ...]. Click !7 Select “slabw2k.inf ” in the “Win” f older , then clic k [Open]. • The folder construction: “7200UsbDrv_v100” ➞ “Driver” ➞ “Win” Click Select “slabw2k.
12 COM PORT CONFIRMA TION Windows Vista q Star t up Windows . w Right click “Computer , ” then select “Proper ties. ” • “Computer” is av ailable in <Start> menu. e “System” screen appears as below . Click [De vice Manager]. Click r In case “User Account Control” dialogue bo x ap- pears as below , click [Contin ue].
13 DRIVER UNINST ALLA TION The display ed dialogue box es or indications ma y differ slightly from the follo wing instr uctions according to your system conditions, or en vironment. Windows Vista q Star t up Windows . w Select the “Control P anel” in the Star t menu.
14 FOR Y OUR REFERENCE COM P ort setting T o ch ange the COM P or t n umber settin g, co nnect the trans ceiv er t o the PC and then turn the tr ansceiv er po wer ON after the driver installation is completed. Windows Vista q Star t up Windows . w Right click “Computer , ” then select “Properties.
15 FOR Y OUR REFERENCE COM P or t setting (Continued) Windows XP For Windo ws 2000: Ref er to the f ollowing instructions because the operations of Windows 2000 are similar to Windows XP . q Star t up Windows. w Right click “My Computer , ” then select “Properties.
16 FOR Y OUR REFERENCE (Continued) About audio When the transceiv er is connected to a PC with the USB cable (third party), the follo wing oper ations can be perf or med; • Received audio output to the PC .
17 FOR Y OUR REFERENCE About audio (Continued) The modulation input settings T o input the audio sign al from the US B jac k of the t ransceiv er , set t he modulati on input connector as “USB” in the set mode item ‘Modulation input (Data OFF)’ or ‘Modulation input (Data ON)’, or CI-V system (command).
18 FOR Y OUR REFERENCE About audio (Continued) USB level setting Set the input modulation le vel of the USB jac k in the set mode item ‘USB Lev el’ or CI-V system (command). <Set mode> q Push and hold M-CH/RIT SET for 1 sec. twice to enter the set mode.
19 FOR Y OUR REFERENCE (Continued) Specifications Connector type USB B type Interf ace USB 2.0/1.1 P ow er supply Self power The PC cannot recognize the transceiv er when the pow er is OFF . Suppor t OS Windows Vista Windows XP Windows 2000 Serial for CI-V Compliant f or CI-V spec.
An important point after buying a device Icom IC-7200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Icom IC-7200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Icom IC-7200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Icom IC-7200 you will learn all the available features of the product, as well as information on its operation. The information that you get Icom IC-7200 will certainly help you make a decision on the purchase.
If you already are a holder of Icom IC-7200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Icom IC-7200.
However, one of the most important roles played by the user manual is to help in solving problems with Icom IC-7200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Icom IC-7200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
