Instruction/ maintenance manual of the product CD20030 CD20530 Ice-O-Matic
Go to page of 22
SERVICE/INST ALLA TION MANUAL HOTEL/MOTEL DISPENSER Part Number 80701101 Print Date: 6/00 GC Series Cuber Shown CD10022 CD10522 ICE Series Cuber Shown CD20030 CD20530 ICE-O-Matic 11100 East 45th Avenu.
.
CD10022 CD20030 CD10522 CD20530 Intr oduction T o the owner or user . This product is a sour ce of information about the installation, start up, cleaning, maintenance and repair of the pr oduct. The CD10022, CD10522, CD20030 and CD20530 are Ice-O-Matics brand hotel/motel ice dispenser .
CD10022 CD20030 CD10522 CD20530 Specifications Limitations: • Must meet the same limitations as the cuber installed on top of it: • 50 o F air minimum • 100 o F air maximum • Must be installed indoors • Must allow space to the right for air intake when using air cooled machine.
CD10022 CD20030 CD10522 CD20530 Installation: General After the carton has been removed fr om the dispenser , the legs may be installed. Place flat portions of the carton on the floor behind the dispenser and lay the dispenser down on its back. Thread the legs into the base of the dispenser .
CD10022 CD20030 CD10522 CD20530 Installation: Ice Machine Check that gasket tape has been placed at the outside edge of the dispenser top. Place corner posts from the carton on top of the dispenser , at the left and right corners. Place the ice machine onto the dispenser .
CD10022 CD20030 CD10522 CD20530 Kits: Coin Mechanism Kits are available to install a coin mechanism, a room key mechanism or a key car d mechanism. All kits come with detailed instructions which are also listed below .
CD10022 CD20030 CD10522 CD20530 Kits: Coin Mechanism 15. Replace the control box cover , front brace and decorative front cover . The dispenser should now be restor ed to service.
CD10022 CD20030 CD10522 CD20530 Key Kit Installation This kit has been designed for use with the CD10022, CD10522, CD20030 and CD20530 ice dis- penser . When this kit is installed, ice cannot be dis- pensed unless a specific type of key is inserted into the lock cylinder .
CD10022 CD20030 CD10522 CD20530 Key Kit Installation The operation of this kit is as follows: When the key is inserted into the lock cylinder , a portion of the key will extend beyond the brass fitting. It is this part of the key that will actuate the kit micro switch.
CD10022 CD20030 CD10522 CD20530 Key Car d Kit Installation This kit has been designed for use with the CD10022, CD10522, CD20030 and CD20530 ice dispenser . When this kit is installed, ice cannot be dispensed unless a key card is inserted into the key card slot.
CD10022 CD20030 CD10522 CD20530 Key Car d Kit Installation The Operation of this kit is as follows: When the key card is inserted into the key car d slot, and the dispenser button switch is depressed and held, the machine will dispense ice.
CD10022 CD20030 CD10522 CD20530 Final Check List/Initial Start Up 11 1. Check that electrical power has been supplied. 2. Check that a drain, separate from the ice machine, insulated and made of rigid tubing, has been connected to the dispenser .
CD10022 CD20030 CD10522 CD20530 Operational Schematic 12.
CD10022 CD20030 CD10522 CD20530 Cleaning General Care and Ceaning: Periodically inspect and clean the ice dispenser to keep it operating at peak performance.
CD10022 CD20030 CD10522 CD20530 Cleaning 10. Mix a solution of ice machine sanitixer and water: 1 ounce of household bleach to 2 gallons of (95 o F-115 o F) water . W ash all interior surfaces and the wheel withthe sanitizer solution. Use a clean cloth.
CD10022 CD20030 CD10522 CD20530 Service Diagnosis Leaks water Bin drain leaks Check bin drain connections and fittings Check for clogged bin drain tubing Coin Mechanism Does not vend, no ice Check the.
CD10022 CD20030 CD10522 CD20530 Removal and Replacement Gear Motor: 1. Disconnect electrical power . 2. Locate key and remove fr ont panel. 3. Remove dispenser wheel. 4. Disconnect wires at gearmotor . 5. Remove 4 bolts securing gearmotor bracket to cabinet.
CD10022 CD20030 CD10522 CD20530 Standar d With Room Key Kit or Car d Kit Electrical Schematic 17.
CD10022 CD20030 CD10522 CD20530 Standar d With Room Key Kit or Car d Kit Electrical Schematic 18.
CD10022 CD20030 CD10522 CD20530 With Coin Mechanism Electrical Schematic 19.
SER VICE HISTOR Y MODEL NUMBER: ______________ SERIAL NUMBER: _____________ ____________________________ ____________________________ ____________________________ ____________________________ ________.
An important point after buying a device Ice-O-Matic CD20030 CD20530 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ice-O-Matic CD20030 CD20530 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ice-O-Matic CD20030 CD20530 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ice-O-Matic CD20030 CD20530 you will learn all the available features of the product, as well as information on its operation. The information that you get Ice-O-Matic CD20030 CD20530 will certainly help you make a decision on the purchase.
If you already are a holder of Ice-O-Matic CD20030 CD20530, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ice-O-Matic CD20030 CD20530.
However, one of the most important roles played by the user manual is to help in solving problems with Ice-O-Matic CD20030 CD20530. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ice-O-Matic CD20030 CD20530 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
