Instruction/ maintenance manual of the product TYPE 2 Hunter
Go to page of 5
REV: 5/94 PAGE 1 FORM NO. 40987-01 CAUTION: CAUTION: WARNING: CAUTION: FIGURE 3. SHOULD EXTEND AT LEAST 6" BEYOND OUTLET BOX FOR EASE IN MAKING CONNECTIONS. SEE MAKE CERTAIN THAT WIRING MEETS ALL NATIONAL AND LOCAL ELECTRICAL CODES. WIRE LEADS B.
REV: 5/94 FALLING. SCREW COULD RESULT IN FAN UNSCREWING. IS IN THE UP POSITION. NOTE: ASSURES LOCKING TAB IN CANOPY HOLES IN CEILING PLATE THAT MUST BE IN UP POSITION. USE SET OF ON THE SIDE. LOCKING TAB IN SIDE CEILING, THERE ARE (2) SETS OF HOLES FOR MOUNTING FAN ON VAULTED A.
REV: 5/94 FIGURE 7. CANOPY CEILING PLATE MOUNTING SCREW (3) MOUNTING SLOTS (3) SEE FIGURE 7A. MAKE CERTAIN GROOVE AND TAB ARE ENGAGED BEFORE RUNNING FAN.
REV: 5/94 MOUNT BLADES TO FAN WITH WOOD PADDLES LOCATED UNDERNEATH BLADE BRACKETS. UNTIL SOUND HAS DISAPPEARED. NOTE: SHOULD GLOBE EMIT ANY SOUND WHEN FAN IS RUNNING, RE-ADJUST 3 GLOBE MOUNTING SCREWS POSITIONED ON THE OPPOSITE SIDE OF THE BLADE IRON.
C 1989 HUNTER FAN COMPANY REV: 5/94 5. RE-ADJUST 3 GLOBE MOUNTING SCREWS. 5, GLOBE IS VIBRATING AND EMITTING NOISE. * 1. USE BALANCING KIT (SEE STEP 8C). 2. LOWER OR MOVE FAN. 3. TIGHTEN ALL SCREWS. 4. TURN POWER OFF, SUPPORT FAN VERY CAREFULLY, LOOSEN CANOPY AND HANG CORRECTLY.
An important point after buying a device Hunter TYPE 2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hunter TYPE 2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hunter TYPE 2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hunter TYPE 2 you will learn all the available features of the product, as well as information on its operation. The information that you get Hunter TYPE 2 will certainly help you make a decision on the purchase.
If you already are a holder of Hunter TYPE 2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hunter TYPE 2.
However, one of the most important roles played by the user manual is to help in solving problems with Hunter TYPE 2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hunter TYPE 2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
