Instruction/ maintenance manual of the product 41569-01 Hunter Fan
Go to page of 9
41569-01 5/24/2002 1 © 2002 HUNTER F AN CO. Installation Instructions for Hunter Original Ceiling Fans IMPOR T ANT! Read and save these instructions! Read this entire manual thoroughly before beginning installation.
41569-01 5/24/2002 2 © 2002 HUNTER F AN CO. Step 2: Inspect the Fan 1. Unpack the fan carefully to avoid any damage to components. CAUTION : NEVER LIFT THE MOTOR BY THE WIRES. LET THE MOTOR REST IN THE CARTON LINER FOR PROTECTION. 2. Check the sack parts.
41569-01 5/24/2002 3 © 2002 HUNTER F AN CO. Step 3: Installation of Ceiling Mounting Hardware CAUTION : YOUR HUNTER CEILING F AN WEIGHS UP TO 50 LBS. THE FOLLOWING PRECAUTIONS MUST BE T AKEN FOR SAFE.
41569-01 5/24/2002 4 © 2002 HUNTER F AN CO. Step 4: Hanging the Fan CAUTION : BE SURE TO TIGHTEN THE PIPE NIPPLE INTO THE F AN, THE HANGER BRACKET ONTO THE PIPE, AND TIGHTEN THE TWO SET SCREWS AS DESCRIBED IN SUB-STEP 2 TO PREVENT THE F AN FROM F ALLING.
41569-01 5/24/2002 5 © 2002 HUNTER F AN CO. Step 5: Wiring Instructions and Canopy Installation CAUTION : BE CER T AIN THA T ELECTRICITY IS TURNED OFF A T THE MAIN P ANEL BEFORE ANY WIRING IS DONE. NOTE: Before you do the final wiring, you should decide how you want to control your fan - with a pull cord, a wall switch or a speed control.
41569-01 5/24/2002 6 © 2002 HUNTER F AN CO. that includes all mounting hardware and a fresh tube of oil for this reason. The model number is 22360. CAUTION : DO NOT TURN THE F AN ON UNTIL LUBRICA TION HAS BEEN ADDED. TO OPERA TE THE F AN WITHOUT OIL OR WITH LOW OIL WILL VOID YOUR W ARRANTY .
41569-01 5/24/2002 7 © 2002 HUNTER F AN CO. you may use this kit to correct the balance per the instructions supplied with the kit. Step 8: Operation of Y our Hunter Fan 1. The operation of your fan is controlled with a pull-chain switch, which has four (4) positions: Off — High — Medium — Low .
41569-01 5/24/2002 8 © 2002 HUNTER F AN CO. Y our new ceiling fan has ear ned the ENERGY ST AR label because it meets high energy efficiency specifications set by the Environmental Protection Agency (EP A).
41569-01 5/24/2002 9 © 2002 HUNTER F AN CO. TROUBLESHOOTING PROBABLE CAUSE 1. Power turned off, fuse blown, or cir - cuit breaker tripped. 2. Loose wire connections or wrong con- nections. 3. Motor reversing switch not engaged. 4. Pull chain switch not “on.
An important point after buying a device Hunter Fan 41569-01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hunter Fan 41569-01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hunter Fan 41569-01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hunter Fan 41569-01 you will learn all the available features of the product, as well as information on its operation. The information that you get Hunter Fan 41569-01 will certainly help you make a decision on the purchase.
If you already are a holder of Hunter Fan 41569-01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hunter Fan 41569-01.
However, one of the most important roles played by the user manual is to help in solving problems with Hunter Fan 41569-01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hunter Fan 41569-01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
