Instruction/ maintenance manual of the product 41892 Hunter
Go to page of 9
© 2005 Hunter F an Company 41892-01 03/17/2005 1 41892-01_Rev 03.17.05.pmd 3/18/05, 8:44 PM 1.
41892-01 03/17/2005 © 2005 Hunter Fan Company 2 Yo ur new Hunter ® ceiling fan is an addition t o your home or off ice th at will provide comfort and p erformance for many years. This installation and operation manual gives you complete instructions fo r installing and operating your fan.
© 2005 Hunter F an Company 41892-01 03/17/2005 3 Angle Mounting (Fig ure 2) hangs from a vaulted or angled ceiling. Figure 2 - Angle mounting pr epar ing the fan sit e Th ese guideli nes ar e de signed to help you select the b est location fo r your f an and to pr epare the site prior to installing the fan.
41892-01 03/17/2005 © 2005 Hunter Fan Company 4 cutting the c eiling hole 1. Locate the site for the hole dir ectly below the joist or suppor t brace that will hold the outlet box and fan. 2. Cut a 4" diame ter hole through the dry wall or plaster of the ceiling as shown in Figure 5.
© 2005 Hunter F an Company 41892-01 03/17/2005 5 4. Align the slotted holes (refer to Figur e 9) in the ceiling plate with the pilot holes in the woo d support structure.
41892-01 03/17/2005 © 2005 Hunter Fan Company 6 hanging the fan 1. Raise the fa n and place the hook through t he lo op on the ceil- ing plate as shown in Figure 14. Use the note and arr ow en- graved in the ceiling plate t o a ssist in determining the dir e c - tion to assemble.
© 2005 Hunter F an Company 41892-01 03/17/2005 7 2. Hook the tab hole over the tab on the ceiling plate as shown in Figure 17. 3. Raise the canopy, be sur e the holes in the canopy and the ceil- ing plate ar e aligned, and loos ely assemble the c anopy screws one at a time.
41892-01 03/17/2005 © 2005 Hunter Fan Company 8 inst alling the sw itch ho using attachin g the upper switch ho using 1. Partially install two #6-32 x 3/8" housing ass embly screws into the switch h ou sing mounting plate as shown in Figur e 22.
© 2005 Hunter F an Company 41892-01 03/17/2005 9 operatin g yo ur ceilin g fan 1. T urn on ele ctrical power to the fan. 2. The fan pull chain cont rols power to the fan. The pull chain has four settings in sequence: High, Me dium, Low and Off. •P ull the ch ain slowly to change settings.
An important point after buying a device Hunter 41892 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hunter 41892 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hunter 41892 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hunter 41892 you will learn all the available features of the product, as well as information on its operation. The information that you get Hunter 41892 will certainly help you make a decision on the purchase.
If you already are a holder of Hunter 41892, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hunter 41892.
However, one of the most important roles played by the user manual is to help in solving problems with Hunter 41892. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hunter 41892 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
