Instruction/ maintenance manual of the product 9118.15 American Standard
Go to page of 8
730 1 793-1 00 Rev . D 1 Introduction: Thank you for selecting our products...products which have been the benchmarks of fine quality for years. To help insure that the installation process will proceed smoothly, please read these instructions carefully before you begin.
2 730 1 793-1 00 Rev . D NOTE: For ease of installation and accessibility, it is recommended that straight stops with flex supply tubes be used. As an alternative, if rigid supply risers are used, it is suggested to use angle stops in place of the straight stops.
730 1 793-1 00 Rev . D 3 4 5 6 INST ALL ICU SINK 1. Mount SINK onto the two HANGER STUDS. Hold SINK in place and temporarily install NYLOCK NUT & WASHER on one of the HANGER STUDS to retain SINK. MOUNT ELECTRONICS BO X COMPLETE W AS TE OUTLET CONNECTION NOTE: Installation with ELECTRONIC BOX only is for cold or tempered water.
4 730 1 793-1 00 Rev . D INST ALL AND CONNECT MIXING V AL VE (MIXING V AL VE IS OPTIONAL) CONNECT MIXING V AL VE T O W A TER SUPPLIES 11 10 12 ELECTRIC AL HOOK-UP AND INS T ALLA TION COLD W A TER OR T.
730 1 793-1 00 Rev . D 5 WIRE HANGER EYEBOL T REMO VE THUMB NUT FROM EYE BOL T 4. WIRE HANGER is positioned behind ELECTRONIC BOX and in front of DRAIN. 5. Remove THUMB NUT from EYEBOLT. 13 15 CHECK ALL ELECTRICAL AND PLUMBING CONNECTIONS 14 TEST INS T ALLED F A UCET INST ALL WIRE HANGER 1.
6 730 1 793-1 00 Rev . D 16 INST ALL SINK APR ON 1. Hold APRON up against SINK and flush against finished wall. 2. Mark a line with a pencil on the wall about 6" long as shown on both sides of the APRON.. 3. Remove the APRON. Clean the wall where the APRON BRACKETS supplied with SINK are to be applied.
730 1 793-1 00 Rev . D 7 R epair P ar ts ICU Sink S y stem Models: 91 1 8.1 1 1, 91 1 8.1 0 0 & 91 1 8.1 50 7381259-401.0200A ICU Sink Shroud Kit 7381243-251.0020A Offset Drain 7381242-0500A P- T rap Assembly 7381266-200.0070A Bracket Assembly 7381267-400.
8 730 1 793-1 00 Rev . D THIS W ARRANTY IS NO T TRANSFER ABLE FROM ORIGINAL CONSUMER PURCHA SER. AS AMERICA, INC. ONE YEAR LIMITED W ARRANTY If inspection of this AS America, Inc.
An important point after buying a device American Standard 9118.15 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Standard 9118.15 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Standard 9118.15 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Standard 9118.15 you will learn all the available features of the product, as well as information on its operation. The information that you get American Standard 9118.15 will certainly help you make a decision on the purchase.
If you already are a holder of American Standard 9118.15, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Standard 9118.15.
However, one of the most important roles played by the user manual is to help in solving problems with American Standard 9118.15. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Standard 9118.15 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
