Instruction/ maintenance manual of the product SKM 5200 Huffy
Go to page of 14
5/99 P/N 205932 1 Customer Service Center N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A. A Huffy Company Port able Basketball System Owners Manual T oll-Free Customer Service Number for U.S: 1-800-558-5234 Canada Only: 1-800-284-8339 Internet Address: http://www .
P/N 205932 5/99 2 W ARNING F AILURE TO FOLLOW THESE W ARNINGS MA Y RESUL T IN SERIOUS INJUR Y AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system. • DO NO T HANG on the rim or an y par t of the system including bac kboard, suppor t braces or net.
5/99 P/N 205932 3 52.
4 P/N 205932 5/99 Mark pole sections with tape as shown. 1. 1 3 2 2. TOP MIDDLE BOTTOM 5” (13 cm) 3. IMPORT ANT! Add bottom pole section (3) to assembly as shown. Bounce pole sections together 3 times, rotate 90° and repeat rotation bounce procedure.
5/99 P/N 5 P/N 205932 5/99 5. Install rod (8) thru holes in bottom pole section (3) and eyebolt (7) as shown. 7 7. 9 Pole 12 Bring pole foward and secure pole to front panel (4) at 34” (86.4 cm) mark on pole. Tighten nuts evenly until snug. NOTE: Equal rotations on each side of u-bolt are necessary.
6 P/N 205932 5/99 25 14 17 15 16 20 19 27 23 23 28 25 26 16 IMPORT ANT! Test fit bolts into holes of brackets (14) and carefully rock them in a circular motion to ream out paint from holes if necessary. IMPORT ANT! Finger tighten nuts and bolts until instructed to fully tighten later.
5/99 P/N 205932 7 P/N 205932 5/99 14 36 33 33 34 34 32 Assemble rim bracket (30). Tighten completely. 14. 30 KEYHOLE SLOT 31 37 30 35 34 Start with nuts (34) flush against bracket (14), secure rim assembly and bracket (14) to backboard. NOTE: Rim mounting nuts and bolts supplied with rim hardware.
8 P/N 205932 5/99 Assemble elevator tubes (23) to backboard bracket. 28 25 23 23 14 24 25 Support pole on sawhorse. Attach backboard assembly to top pole section (1). NOTE: Two people are recommended for this step, use caution, elevator assembly is heavy.
5/99 P/N 9 P/N 205932 5/99 20. Install rim to backboard. 12 44 36 46 36 45 Slide Spacer and Bolt Through Bracket 42 43 Roll completed assembly to desired position, fill base with 25 gallons (95 liters) of water or approx. 300-325 lbs. of sand and snap cap (41) in place.
10 P/N 205932 5/99 48 36 Install bolt (48) and adjust to level rim. 22. Use Caution Not To Cross-Thread Bolt Push Down to Start Bolt Adjust bolt (48) to level rim.
5/99 P/N 11 HUFFY HUFFY S PO R TS 10 feet (3.05m) REGULATION RIM HEIGHT IS 10 FEET (3.05M). (10 fot) i NBA. P/N 205932 5/99 Apply logo label (51). Then snap cover (37) closed. 37 51 25. Insert the end of a broom handle or wooden dowel 3/4”-7/8” (19-22 mm) diameter into the release lever.
12 P/N 205932 5/99 Make final adjustments to level the rim. If the backboard and rim are tipped back, raise front panel (4) until level and tighten completely. NOTE: Equal rotations on each side of u-bolt are necessary. If backboard and rim are tipped forward, lower front panel (4) until level and tighten.
5/99 P/N 13 P/N 205932 5/99 P ARTS LIST Item Qty. Part No. Description 1 1 982416 Top Pole Section, (Black) 2 1 902415 Middle Pole Section, (Black) 3 1 952415 Bottom Pole Section, (Black) 4 1 202422 Front Panel 5 1 202420 Base 6 1 202475 Tank 7 1 202446 Eyebolt 3/8-16 x 4-3/4 Long 8 1 202428 Rod, 1/2 O.
P/N 205932 5/99 14 5/99 P/N 205932 Item #13 (1) Item #21 (1) Item #22 (1) Item #20 (1) Item #24 (5) Item #38 (1) Item #26 (1) HARDW ARE IDENTIFIER (CONTINUED) Item #28 (6) Item #33 (2) Item #25 (4) Item #34 (6) Item #17 (2) Item #35 (4) Item #36 (5)* Item #46 (1) Item #48 (1) * YOU MAY HAVE EXTRA PARTS WITH THIS MODEL.
An important point after buying a device Huffy SKM 5200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Huffy SKM 5200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Huffy SKM 5200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Huffy SKM 5200 you will learn all the available features of the product, as well as information on its operation. The information that you get Huffy SKM 5200 will certainly help you make a decision on the purchase.
If you already are a holder of Huffy SKM 5200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Huffy SKM 5200.
However, one of the most important roles played by the user manual is to help in solving problems with Huffy SKM 5200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Huffy SKM 5200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
