Instruction/ maintenance manual of the product NT9110 Huffy
Go to page of 15
1 07/01 P/N 211550A REQUIRED TOOLS AND MA TERIALS: • Two People • Carpenters Level • Wrench: 3/4” Or Small Adjustable • Combination Wrenches: (Two) 1/2”, 9/16” • Step Ladder 8 ft. (2.4 m) • Utility Knife • Reversible Drill with 3” Phillips and Standard Screwdriver Tips • Ballast (Sand or Dry Cement 480-640 lbs.
2 P/N 211550A 07/01 WARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS I NJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the unit. See instruction manual for proper installation and maintenance.
HERC01.EPS 211291 WARNING BACKBOARD Use a fork lift to remove unit from truck and carefully remove packing materials. Remove backboard, lower pad (1) and both shroud covers (2 and 3).
4 P/N 211550A 07/01 Remove extension arm (4) from slide post brackets as shown. 4. Cut stabilizing strap and set brake so unit will not roll. Raise main post upward into playing position. 5. HERC05.EPS 211291 HERC03.EPS 211291 KEEP HANDS CLEAR WAR N IN G Ballast Inst allation 6.
HERC08.EPS 211291 WARNING 5 07/01 P/N 211550A Attach lower front pad (1) to unit as shown. 8. 9. Install 640 lbs. (290 kg) of ballast. Secure with straps.
6 P/N 211550A 07/01 12. 13. 11 . Attach bracket (37) to backboard and support structure by inserting bolts (14) through washers (15) and top holes in bracket (37), Tighten nuts (16) completely. Peel and stick foam pad (12) to front of board, behind bracket (37) .
7 07/01 P/N 211550A 14. 11 41 36 36 40 31 37 38 Insert spacer (40) through rim assembly (11). Place rim assembly on bracket (37) so the cariage bolt (39) is inserted through hole on top of inner bracket (38). Install bolt (41), washers (36) and nut (31) through top holes on bracket (37) as shown.
8 P/N 211550A 07/01 16. 17. 18. RIM LEVELING INSTRUCTIONS: Install cover plate (20) on rim (11) using self tapping screws (21) as shown. Place level on rim (11) and adjust nut (31) until l evel. Tighten nut (42) to set rim tension for playing. Secure net (32) to rim (11).
9 07/01 P/N 211550A WARNING XHRC542A.EPS 211291 28 28 16 24 Loosely assemble hardware to strut (22). Mount strut (22) to backboard and finger tighten. Repeat for opposite side. 19. 15 23 25 26 22 22 WARNING Secure struts (22) to extension arm (4).
10 P/N 211550A 07/01 Loosen nut located at top of post behind pole mast (Refer to Steps 6 and 7) and carefully lower pole mast as shown. Insert extension arm and backboard assembly into place and secure as shown. (Refer to Step 4) 21. 22. WARNING 23.
11 07/01 P/N 211550A XVAR07.EPS 211492 W A R N IN G 24. Raise pole mast into playing position. Re-tighten nut located at top of post behind mast. (Refer to Step 7) 25. 26. Remove bolt at end of post brackets. Rotate extension arm and up into playing position and re-insert bolt to secure.
12 P/N 211550A 07/01 Remove tagged bolt at top of slide post. 27. Height Adjustment HERC13g.EPS 211292 WARNING RE-INSERT TAGGED BOLT FOR STORAGE! FAILURE TO DO SO MAY RESULT IN SERIOUS BODILY INJURY AND/OR PROPERTY DAMAGE.
13 07/01 P/N 211550A Ground Inst allation P lace unit in desired location. Secure unit to ground or flat surface as shown. 29. HERC17.EPS 211291 HERC16.EPS 211291 35 IN-GROUND INSTALLATION FLAT SURFACE INSTALLATION 34 HERC18.EPS 211291 35 10FT_VAR.
14 P/N 211550A 07/01 P ARTS LIST Item #14 (4) Item #16 (6) Item Qty. Part No. Description 1 1 206597 Pad, Lower Front 2 1 206592 Shroud, Right Cover 3 1 206593 Shroud, Left Cover 4 1 206574 Extension .
15 07/01 P/N 211550A HARDW ARE IDENTIFIER 203001 Hex Head Locknut 5/16 Item #26 (4) 203160Weld Stud, rt. angle, 5/16 x 1-1/2 Item #28 (2) 203153 hex head bolt 5/16 x 3/4 Item #24 (2) Item #35 (1) 206116/203305 Washer, Lock 9/16 O.
An important point after buying a device Huffy NT9110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Huffy NT9110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Huffy NT9110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Huffy NT9110 you will learn all the available features of the product, as well as information on its operation. The information that you get Huffy NT9110 will certainly help you make a decision on the purchase.
If you already are a holder of Huffy NT9110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Huffy NT9110.
However, one of the most important roles played by the user manual is to help in solving problems with Huffy NT9110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Huffy NT9110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
