Instruction/ maintenance manual of the product M732211 Huffy
Go to page of 22
1 05/06 ID# M732211 Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-632 7921 Internet Address: http://www.
2 ID# M732211 05/06 Owner must ensure that all players know and follow these rules for safe operation of the system. W ARNING • DO NOT HANG on the rim or any part of the system including backboard, support braces or net.
05/06 ID# M732211 3 522730 06/05 MOVING SYSTEM HEIGHT ADJUSTMENT TO RESET OR REPOSITION BACKBOARD: 1. Grasp handle firmly and pull down to raise rim P AST highest position (above 10 feet). 2. While still holding handle firmly , CAREFULL Y lower rim to lowest position.
4 ID# M732211 05/06 IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections; hardware and additional p art s are p acked inside. NOTICE T O ASSEMBLERS Adult Assembly Required. Dispose of ALL packaging materials promptly . As with all products, periodically inspect for loose small part s.
05/06 ID# M732211 5 Get to know the basic parts of your basketball system... RIM POLE BASE BACKBOARD FRONT VIEW ELEVATOR ADJUSTMENT SUPPORT STRUT.
6 ID# M732211 05/06 P ARTS LIST - See Hardware Identifier NOTE: Hardware kit is designed for more than one style of basketball system. Not all hardware will be used.
05/06 ID# M732211 7 * You may have extra parts with this model. HARDW ARE IDENTIFIER (BOL TS & PINS) Item #12 (6) Item #13 (1) Item #15 (2) Item #14 (1) Item #9 (2) Item #18 (2) Item #38 (7) Item .
8 ID# M732211 05/06 Item #32 (1) Item #31 (1) HARDW ARE IDENTIFIER (STEEL SP ACERS & RODS) HARDW ARE IDENTIFIER (PLASTIC SP ACERS & CLIPS) HARDW ARE IDENTIFIER (OTHER) Item #44 (2) Item #7 (1).
05/06 ID# M732211 9 ITEMS REQUIRED FOR THIS SECTION This is what your system will look like when you’ve finished this section. (2) 1/2” and (2) 9/16" Wrenches 9/16” 1/2” (2) Socket Wrenches and Socket s SECTION A: ASSEMBLE THE BASE 1. Correctly identify each pole section and mark indicated distance from ends with tape as shown.
10 ID# M732211 05/06 2. WOOD SCRAP (NOT SUPPLIED) 5 4 While maintaining alignment, bounce middle pole section (5) into top section (4) using a wood scrap as shown until the top pole no longer moves toward the pole identification sticker on the middle pole.
05/06 ID# M732211 11 4 5 6 WOOD SCRAP (NOT SUPPLIED) RODS SHOWN ARE FOR VISUAL REPRESENTATION OF ALIGNMENT AND ARE NOT SUPPLIED WITH THE HARDWARE Align dimple of middle pole section (5) into trough of bottom pole section (6) as shown.
12 ID# M732211 05/06 4. 5. Install wheel axle (2) through wheel carriage (19) and install wheels (3) onto wheel axle (2) with sp acers (17) as shown. Insert pole assembly into tank assembly as shown. Secure bottom pole (6) section to tank and wheel carriage as shown.
05/06 ID# M732211 13 11 12 12 10 6 6 10 1 13 6. Secure base struts (10) to pole using bolt (1 1), washers (12), and nut (13), as shown. Rotate the non-secured ends of base strut s (10) as shown. 7. Secure both base struts (10) to base using bolts (15), washers (12), and nuts (16).
14 ID# M732211 05/06 This is what your system will look like when you’ve finished this section. (2) 1/2”, (2) 9/16” and (2) 3/4” Wrenches 9/16” 1/2” 3/4” (2) Socket Wrenches and Socket s ITEMS REQUIRED FOR THIS SECTION SECTION B: A TT ACH THE BACKBOARD AND/OR Fit spacer (44) into p awl (27).
05/06 ID# M732211 15 2. Identify elevator tubes (43). T oward Board T oward Pole 43 Elevator T ubes Assemble elevator tubes (43) to ratchet (28) and backboard brackets (29) as shown.
16 ID# M732211 05/06 4 . Secure pawl (27) in place with clevis pin (34) and washers (18) as shown. 18 34 18 27 5 . S tretch spring (40) into position with pliers.
05/06 ID# M732211 17 29 50 16 16 51 43 50 32 36 32 W ARNING! USE CAUTION; ELEV A TOR ASSEMBL Y IS HEA VY . TWO CAP ABLE ADUL TS REQUIRED FOR THIS PROCEDURE. F AILURE TO FOLLOW THIS W ARNING COULD RESUL T IN SERIOUS INJUR Y AND/OR PROPERTY DAMAGE. Insert “T” bolt (36) through Slam Jam bracket (32) as shown.
18 ID# M732211 05/06 38 43 43 42 42 38 22 4 8. Support pole on sawhorse. Attach upper and lower elevator tubes (43) to upper pole section (4) using bolts (42) and nut s (38) as shown. Attach pole cap (22) as shown. Attach upper elevator tubes (43) to backboard support bracket s (29) using spacers (41), bolt (42), and nut (38) as shown.
05/06 ID# M732211 19 42 33 33 47 38 42 33 47 38 9. Attach outer handle tube (47) to upper elevator tubes (43) using bolt (42) sp acers (33) and nut (38) as shown. Attach outer handle tube (47) to lower elevator tubes (43) using bolt (42) sp acers (33) and nut (38) as shown.
20 ID# M732211 05/06 47 48 48 46 11 . Slide inner handle tube (48) into outer handle tube (47) as shown. 12. Secure inner handle tube (48) to outer handle tube (47) using screws (20) as shown.
05/06 ID# M732211 21 13. Inst all Rim to Backboard A. Fit rim (21) securely into bracket (32) as shown. Allow T -bolt (36) to slip through center hole in rim (21). B. Install reinforcement bracket (31) onto T -bolt (36) as shown. C. Install spring (30) onto T -bolt (36) as shown.
22 ID# M732211 05/06 15. Roll the completed assembly to the desired playing area. Fill tank with 33 gallons of water . Secure plug caps (24) into place. 16. Apply the height adjustment and moving label (25) to the front of the pole as shown. 24 24 10 ft.
An important point after buying a device Huffy M732211 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Huffy M732211 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Huffy M732211 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Huffy M732211 you will learn all the available features of the product, as well as information on its operation. The information that you get Huffy M732211 will certainly help you make a decision on the purchase.
If you already are a holder of Huffy M732211, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Huffy M732211.
However, one of the most important roles played by the user manual is to help in solving problems with Huffy M732211. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Huffy M732211 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
