Instruction/ maintenance manual of the product 4.24C Huffy
Go to page of 16
1 03/03 P/N 211988B © COPYRIGHT 2000 by HUFFY SPORTS Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-333 061 Internet Address: http://www.
2 P/N 211988B 03/03 201261 3/99 1 3 2 MOVING SYSTEM 1. While holding pole, rotate basketball system forward until wheels engage with ground. 2. Move basketball system to desired location. 3. Carefully rotate basketball system upright. 4. Reattach ground restraint and check system for stability .
03/03 P/N 211988B 3 IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections, hardware and additional p art s are packed inside. NOTICE T O ASSEMBLERS AL L Huffy Sport s Basketball Systems, including those used for DISPLA YS, MUST be assembled and ballasted with sand or water according to instructions.
4 P/N 211988B 03/03 Get to know the basic parts of your basketball system..... FRONT STRUTS BASE WHEEL CARRIAGE ASSEMBL Y EXTENSION ARM POLE.
03/03 P/N 211988B 5 WARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system. In the U.S.: 1-800-558-5234 and Canada Only: 1-800-284-8339 211239 1/98 See instruction manual for proper installation and maintenance.
6 P/N 211988B 03/03 HARDW ARE IDENTIFIER (BOL TS & NUTS) HARDW ARE IDENTIFIER (OTHER) Item Qty. Part No. Description 1 1 206740 Tank (White) 2 1 200628 Wheel Axle 3 2 226401 Wheel 4 1 986102 Bottom Pole Section 5 1 202820 Rod, 3/8 O.
03/03 P/N 211988B 7 TOOLS REQUIRED FOR THIS SECTION HARDW ARE USED IN THIS SECTION (not actual size) SECTION A : ASSEMBLE THE BASE 9/16” and 1/2” 9/16” and 1/2” AND/OR This is what your system.
8 P/N 211988B 03/03 1. 1 6 5 Remove contents from t ank 2. Install rod (5) through holes in bottom pole section (4) and eyebolt (6). 4 5 4 6.
03/03 P/N 211988B 9 8 4 5 6 3. 9 11 1 12 11 10 10 4. 2 26 26 3 3 7 Install wheel axle (2) through wheel carriage (7) and inst all wheels (3) onto wheel axle (2) with spacers (26) as shown. Insert pole assembly into t ank assembly as shown. Secure bottom pole (4) to tank and wheel bracket as shown, a deep socket is recommended.
10 P/N 211988B 03/03 5. 11 11 1 11 15 10 10 14 18 24 22 8 19 6. Secure non-secured ends of tank strut s (1 1) to t ank as shown. Repeat for opposite side. Attach extension arm (18) to pole using U-bolt (22), washers (19), nuts (8), as shown. Inst all pole cap (24) as shown.
03/03 P/N 211988B 11 TOOLS REQUIRED FOR THIS SECTION HARDW ARE USED IN THIS SECTION SECTION B: ASSEMBLE THE BACKBOARD 1/2” 1/2” OR This is what your system will look like when you’ve finished th.
12 P/N 211988B 03/03 Do not use washers here on spring return style rims. 20 19 16 21 15 18 10 Peel protective film from surface of acrylic backboard prior to use.
03/03 P/N 211988B 13 8. W ARNING: Use of this product without proper installation of net clips, or when all net clips are not present could result in bodily harm. Be sure to follow directions carefully. Install net clips. CLIP “ARM” CLIP “BODY” Insert one “arm” of clip into ram as shown.
14 P/N 211988B 03/03 Insert net into bottom of clip as shown. SIDE VIEW Twist net until it snaps into position. Net must be centered through clip. NET NETCLIP SIDE VIEW NET NETCLIP NET INST ALLA TION 9.
03/03 P/N 211988B 15 1. 28 27 25 27 Place assembled unit to desired location. Fill tank with water (30 gallons/1 14 liters) or sand (360 lb./163 kg) and snap tank cap (23) in place.
16 P/N 211988B 03/03 1. SECTION C: APPL Y HEIGHT AND MOVING LABEL 201261 3/99 1 3 2 MOVING SYSTEM 1. While holding pole, rotate basketball system forward until wheels engage with ground. 2. Move basketball system to desired location. 3. Carefully rotate basketball system upright.
An important point after buying a device Huffy 4.24C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Huffy 4.24C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Huffy 4.24C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Huffy 4.24C you will learn all the available features of the product, as well as information on its operation. The information that you get Huffy 4.24C will certainly help you make a decision on the purchase.
If you already are a holder of Huffy 4.24C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Huffy 4.24C.
However, one of the most important roles played by the user manual is to help in solving problems with Huffy 4.24C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Huffy 4.24C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
