Instruction/ maintenance manual of the product 211954E Huffy
Go to page of 22
1 01/04 P/N 211954E © COPYRIGHT 2000 by HUFFY SPORTS Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-333 061 Internet Address: http://www.
2 P/N 211954E 01/04 BEFORE YOU ST ART! T o ensure optimal playability of backboard system, a close tolerance fit between the elevator component s and hardware is required. T est-fit large bolt s into large holes of elevator tubes, backboard bracket s, and triangle plates.
01/04 P/N 211954E 3 W ARNING F AILURE T O FOLLOW THESE W ARNINGS MA Y RESUL T IN SERIOUS INJUR Y AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system. • DO NO T HANG on the rim or any part of the system including bac kboard, support braces or net.
4 P/N 211954E 01/04 For more information on assembly, placement, proper use, and maintenance, visit The American Basketball Council website at http://www.smarthoops.com. IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections; hardware and additional p art s are packed inside.
01/04 P/N 211954E 5 2 2 1 3 TO ADJUST BACKBOARD: 1. While holding handle, remove pin. 2. Move elevator up or down to desired height. 3. Replace pin full length to lock system at desired height. 201252 2/99 1 2 4 3 MOVING SYSTEM 1. Adjust basketball backboard height to lowest position.
6 P/N 211954E 01/04 Get to know the basic parts of your basketball system..... SUPPOR T STRUT BACKBOARD FRONT RIM BASE POLE WHEELS ELEV A TOR SYSTEM.
01/04 P/N 211954E 7 P ARTS LIST - See Hardware Identifier Item Qty. Part No. Description 1 1 206336 Tank 2 2 206330 Wheel Axle, 4-1/4 Long 3 2 226401 Wheel, 4“ (Black) 4 1 904847 Top Pole Section 5 1 908024 Middle Pole Section 6 1 908487 Bottom Pole Section 7 1 202820 Rod, 3/8 O.
8 P/N 211954E 01/04 * You may have extra parts with this model. Item #14 (1) Item #18 (2) Item #21 (4) Item #22 (2) Item #25 (1) Item #30 (2) Item #31 (1) Item #38 (4) Item #35 (4) Item #48 (1) Item #.
01/04 P/N 211954E 9 Insert axle rod (2) through wheel (3), as shown. Secure wheel assembly to tank (1) by t apping wheel downward with hammer , snapping it into position. Repeat for opposite side, then carefully , turn t ank (1) over . Remove all contents from underside of tank.
10 P/N 211954E 01/04 IMPORT ANT! Center alignment slot of lower pole section (6) in a lower hole of middle pole section (5) as in step 3. While maintaining alignment, bounce top & middle pole assembly (4 & 5) onto lower pole section (6) as shown until top & middle pole assembly no longer moves toward taped reference mark on bottom pole.
01/04 P/N 211954E 11 Insert pole assembly into tank assembly as shown. Install rod (7) through holes in bottom pole section (6) and eyebolt (8). DO NOT OVER TIGHTEN IMPORT ANT!: DO NOT OVER TIGHTEN IMPORT ANT!: TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
12 P/N 211954E 01/04 1 11 15 16 11 1 13 13 11 12 13 6 14 13 4 16 37 18 18 16 17 Secure strut tubes (1 1) to bottom pole section (6) as shown. Carefully place unit in the side position and secure strut (1 1) to t ank (1) as shown. Completely tighten. Repeat for opposite side.
01/04 P/N 211954E 13 19 21 21 19 19 20 20 19 17 22 22 23 23 Attach sp acers (22, 23) to pole mount bracket (17) with bolt s (21), washers (19), and nuts (20) as shown. Tighten just until washers (19) stop moving. IMPORT ANT!: 17 16 26 24 24 27 25 FIG .
14 P/N 211954E 01/04 30 29 16 28 28 Apply logo and height indicator labels (29) to adjustment rod (28) as shown. Attach handle part s (32, 33) to adjustment rod with screw (31), carriage bolt (30), and flange nut (16) as shown. Insert handle assembly through pole mount assembly as shown.
01/04 P/N 211954E 15 36 36 21 21 20 20 34 Attach backboard support bracket s (34) to the backboard frame using bolt s (21), spacers (36), and nut s (20) as shown.
16 P/N 211954E 01/04 47 42 40 41 40 55 57 57 34 39 Attach rim to board as shown. For spring loaded rim assembly , refer to instructions included with rim hardware. Assemble lower elevator tubes (40) as shown. DO NOT overtighten. IMPORT ANT!: Refer to instructions included with board and rim hardware for backboard and rim assembly .
01/04 P/N 211954E 17 Assemble upper elevator tubes (43) to backboard brackets (34). DO NOT overtighten. SAWHORSE OR SUPPORT TABLE Support pole on sawhorse. Attach backboard assembly to top pole section (4) as shown. Install pole cap (46). USE CAUTION; ELEVATOR ASSEMBLY IS HEAVY.
18 P/N 211954E 01/04 47 39 44 44 28 Install upper elevator tubes (43) to triangle plates (45) as shown. Then, install handle assembly to lower elevator tubes (40) using bolt (47), spacers (44), and nut (39) as shown. Before going on to next step, set adjustable system assembly to the 10’ (3.
01/04 P/N 211954E 19 41 39 47 43 43 53 49 52 Insert bolt (47) through left side upper elevator tube (43), then stretch spring (41) onto bolt (47). Insert bolt (47) through right side upper elevator tube (43) and secure with nut (39) . Roll completed assembly to desired position.
20 P/N 211954E 01/04 26 9. 10. 11 . 54 10 f t. (3.05 m) While holding handle, remove pin (26). Move elevator up or down to desired height. Replace pin (26) full length to lock system at desired height. Apply height and transport label (54) to front of pole as shown.
01/04 P/N 211954E 21 CLIP “ARM” CLIP “BODY” A A B B C C 50 Install net clips. Installez les pinces du filet. Netzhalteklammern anbringen. Instale los sujetadores de la red.
22 P/N 211954E 01/04 NET INST ALLA TION Install net. Installez le filet. Das Netz anbringen Instale la red. Insert net into bottom of clip as shown. Insérez le filet dans la base de la pince, comme illustré. Das Netz wie gezeigt unten in den Clip stecken.
An important point after buying a device Huffy 211954E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Huffy 211954E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Huffy 211954E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Huffy 211954E you will learn all the available features of the product, as well as information on its operation. The information that you get Huffy 211954E will certainly help you make a decision on the purchase.
If you already are a holder of Huffy 211954E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Huffy 211954E.
However, one of the most important roles played by the user manual is to help in solving problems with Huffy 211954E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Huffy 211954E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
