Instruction/ maintenance manual of the product 211953C Huffy
Go to page of 25
1 12/03 P/N 211953C © COPYRIGHT 2000 by HUFFY SPORTS Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-333 061 Internet Address: http://www.
2 P/N 211953C 12/03 BEFORE YOU ST ART! T o ensure optimal playability of backboard system, a close tolerance fit between the elevator component s and hardware is required. T est-fit large bolt s into large holes of elevator tubes, backboard bracket s, and triangle plates.
12/03 P/N 211953C 3 W ARNING F AILURE T O FOLLOW THESE W ARNINGS MA Y RESUL T IN SERIOUS INJUR Y AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system. • DO NO T HANG on the rim or any part of the system including bac kboard, support braces or net.
4 P/N 211953C 12/03 For more information on assembly, placement, proper use, and maintenance, visit The American Basketball Council website at http://www.smarthoops.com. IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections; hardware and additional p art s are packed inside.
12/03 P/N 211953C 5 2 2 1 3 TO ADJUST BACKBOARD: 1. While holding handle, remove pin. 2. Move elevator up or down to desired height. 3. Replace pin full length to lock system at desired height. 201252 2/99 1 2 4 3 MOVING SYSTEM 1. Adjust basketball backboard height to lowest position.
6 P/N 211953C 12/03 Get to know the basic parts of your basketball system..... HUFFY HUFFY SPORTS S P O R T S SUPPOR T STRUT BACKBOARD FRONT RIM BASE POLE WHEELS ELEV A TOR SYSTEM.
12/03 P/N 211953C 7 P ARTS LIST - See Hardware Identifier P ARTS LIST - See Hardware Identifier Item Qty . Part No. Description 1 1 206336 Tank, (Gray) 2 2 206330 Wheel Axle, 4-1/4 Long 3 2 226401 Wheel, 4 “ (Black) 4 1 904847 Top Pole Section 5 1 908481 Middle Pole Section 6 1 908487 Bottom Pole Section 7 1 202820 Rod, 3/8 O.
8 P/N 211953C 12/03 HARDW ARE IDENTIFIER (BOL TS) * You may have extra parts with this model. Item #8 (1) Item #14 (1) Item #15 (2) Item #18 (2) Item #21 (3) Item #25 (3) Item #30 (2) Item #47 (6) Ite.
12/03 P/N 211953C 9 * You may have extra parts with this model. HARDW ARE IDENTIFIER (STEEL SP ACERS & RODS) HARDW ARE IDENTIFIER (NUTS & W ASHERS) HARDW ARE IDENTIFIER (PLASTIC SP ACERS &.
10 P/N 211953C 12/03 TOOLS REQUIRED FOR THIS SECTION HARDW ARE USED IN THIS SECTION (not actual size) SECTION A : ASSEMBLE THE BASE This is what your system will look like when you’ve finished this .
12/03 P/N 211953C 11 Insert axle rod (2) through wheel (3), as shown. Secure wheel assembly to tank (1) by t apping wheel downward with hammer , snapping it into position. Repeat for opposite side, then carefully , turn t ank (1) over . Remove all contents from underside of tank.
12 P/N 211953C 12/03 IMPORT ANT! Center alignment slot of lower pole section (6) in a lower hole of middle pole section (5) as in step 3. While maintaining alignment, bounce top & middle pole assembly (4 & 5) onto lower pole section (6) as shown until top & middle pole assembly no longer moves toward taped reference mark on bottom pole.
12/03 P/N 211953C 13 Insert pole assembly into tank assembly as shown. Install rod (7) through holes in bottom pole section (6) and eyebolt (8). DO NOT OVER TIGHTEN IMPORT ANT!: DO NOT OVER TIGHTEN IMPORT ANT!: TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
14 P/N 211953C 12/03 1 11 15 16 11 1 13 13 11 12 13 6 14 13 HUFFY HUFFY SPORTS S PO RT S 4 16 18 18 16 17 Secure strut tubes (1 1) to bottom pole section (6) as shown. Once again, carefully place unit in the side position and secure strut (1 1) to tank (1) as shown.
12/03 P/N 211953C 15 19 21 21 19 19 20 20 19 17 22 22 23 23 Attach sp acers (22, 23) to pole mount bracket (17) with bolt s (21), washers (19), and nuts (20) as shown. Tighten just until washers (19) stop moving. IMPORT ANT!: 17 16 26 24 24 27 25 FIG .
16 P/N 211953C 12/03 30 29 16 28 28 Apply logo and height indicator labels (29) to adjustment rod (28) as shown. Attach handle part s (32, 33) to adjustment rod with screw (31), carriage bolt (30), and flange nut (16) as shown. Insert handle assembly through pole mount assembly as shown.
12/03 P/N 211953C 17 TOOLS REQUIRED FOR THIS SECTION HARDW ARE USED IN THIS SECTION (not actual size) SECTION B: ASSEMBLE THE BASE This is what your system will look like when you’ve finished this s.
18 P/N 211953C 12/03 16. 36 20 35 21 34 37 Install sp acers (36) onto backboard bracket s (34) with bolts (37, 21) and lock-nut s (35, 20) as shown. Assemble lower elevator tubes (40) as shown. NOTE: T est fit bolt s into holes of brackets (34) and carefully rock them in a circular motion to ream out paint from holes if necessary 17.
12/03 P/N 211953C 19 S tarting with nut s (16) flush against bracket (34), secure rim (42) and bracket to backboard. Bend bracket (34) to line up with holes in backboard and secure. 18. 19. 34 16 42 16 IMPORT AN T! : For spring loaded rim assembly , refer to instructions included with rim hardware.
20 P/N 211953C 12/03 Assemble upper elevator tubes (43) to backboard brackets (34). SAWHORSE OR SUPPORT TABLE Support pole on sawhorse. Attach backboard assembly to top pole section (4) as shown. Install pole cap (46). USE CAUTION; ELEVATOR ASSEMBLY IS HEAVY.
12/03 P/N 211953C 21 47 39 44 44 28 Before going on to next step, set adjustable system assembly to the 10’ (3.05 m) setting. NOTE: IMPORT ANT!: DO NOT OVER TIGHTEN 40 47 38 40 39 43 38 45 43 23. 22. 39 47 43 43 40 40 38 55 55 38 38 38 Install upper elevator tubes (43) to triangle plates (45) as shown.
22 P/N 211953C 12/03 53 49 52 Roll completed assembly to desired position. Secure assembly to ground using anchor strap (52) and tie down stake (53). Fill t ank with water (approx. 30 gallons/1 15 Liters) or sand (approx. 255 lbs./1 13 kg) and snap cap (49) in place.
12/03 P/N 211953C 23 26 26. 27. 28. HUFFY HUFFY SPORTS S P O R T S 54 10 f t. (3.05 m) While holding handle, remove pin (26). Move elevator up or down to desired height. Replace pin (26) full length to lock system at desired height. Apply height and transport label (54) to front of pole as shown.
24 P/N 211953C 12/03 Install net clips. Attachez les pinces de filet au cerceau, comme illustré. Die Netzhalteklammern wie gezeigt am Korbrand anbringen. Instale los sujetadores de la red en el borde, como se muestra. Insert one “arm” of clip into ram as shown.
12/03 P/N 211953C 25 Install Net Installez le filet. Das Netz anbringen Instale la red. Insert net into bottom of clip as shown. Insérez le filet dans la base de la pince, comme illustré. Das Netz wie gezeigt unten in den Clip stecken. Introduzca la red en la parte inferior del sujetador como se muestra.
An important point after buying a device Huffy 211953C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Huffy 211953C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Huffy 211953C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Huffy 211953C you will learn all the available features of the product, as well as information on its operation. The information that you get Huffy 211953C will certainly help you make a decision on the purchase.
If you already are a holder of Huffy 211953C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Huffy 211953C.
However, one of the most important roles played by the user manual is to help in solving problems with Huffy 211953C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Huffy 211953C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
