Instruction/ maintenance manual of the product 211878 Huffy
Go to page of 10
1 02/04 P/N 211878 © COPYRIGHT 2000 by HUFFY SPORTS Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-333 061 Internet Address: http://www.
2 P/N 211878 02/04 LEVER 1 2 BROOM HANDLE 201257 3/99 1 2 4 3 MOVING SYSTEM 1. Adjust basketball backboard height to lowest position. 2. While holding pole, rotate basketball system forward until wheels engage with ground. 3. Move basketball system to desired location.
02/04 P/N 211878 3 For more information on assembly, placement, proper use, and maintenance, visit The American Basketball Council website at http://www.smarthoops.com. IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections; hardware and additional p art s are p acked inside.
4 P/N 211878 02/04 P A RTS LIST - See Hardware Identifier Item #2 (4) Item #5 (6)* Item #4 (6) Item Qty. Part No. Description 1 1 206118 Warning Label 2 4 203113 Hex Flange Bolt 5/16-18 x 2.5 Long 3 2 203038 Bolt, Carriage 5/16-18 x 2.75 Long 4 6 203309 Washer, 1 O.
02/04 P/N 211878 5 5 5 4 8406 Bracket (not supplied) 5 2 4 3 6 5 5 3 2 3 3 5 Mount extension arm and rim to backboard. Attach backboard assembly to bracket as shown.
6 P/N 211878 02/04 5 5 3 5 2 3 REGULATION RIM HEIGHT IS 10 FEET (3.05M). 4 10 feet 3.05 m Bend top of backboard brackets (40) outward to match up with holes on the backboard and secure using nuts (17) and bolts (43) as shown. Attach rim (32) to backboard using using bolts (42) and nuts (17) as shown.
02/04 P/N 211878 7 Pole bracket will need to be lightly pressed into backboard ribbing. Be sure to press completely into place. Attach rim to backboard and pole bracket with knob, reinforcement bracket, and carriage bolt as shown. Tighten knob completely.
8 P/N 211878 02/04 A TT ACH SLAM JAM RIM (Not Supplied) REQUIRED 9 REQUIRED 9 REQUIRED 9.
02/04 P/N 211878 9 2. CLIP “ARM” CLIP “BODY” A A B B C C 7 Install net clips. 6 Insert one “arm” of clip (19) into ram (18) as shown. Twist “body” of clip slightly so that second “arm” slides over the top of the first “arm” as shown.
10 P/N 211878 02/04 3. NET INST ALLA TION Install net. Insert net into bottom of clip as shown. SIDE VIEW Twist net until it snaps into position. Net must be centered through clip.
An important point after buying a device Huffy 211878 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Huffy 211878 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Huffy 211878 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Huffy 211878 you will learn all the available features of the product, as well as information on its operation. The information that you get Huffy 211878 will certainly help you make a decision on the purchase.
If you already are a holder of Huffy 211878, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Huffy 211878.
However, one of the most important roles played by the user manual is to help in solving problems with Huffy 211878. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Huffy 211878 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
