Instruction/ maintenance manual of the product 8340.235.004 American Standard
Go to page of 4
Product names listed herein are trademarks of American Standard Inc. Los nombres de los productos presentados en este documento son marcas comerciales de American Standard Inc. Les noms des produits cités ici sont des marques de commerce de American Standard Inc.
M968122 ROUGH-IN DESBASTADO PRÉPARATION 1 Prepare water supply lines per "Roughing-in Dimensions". Install 1/2" NPT. SUPPLY NIPPLES. Prepare las líneas de suministro de agua de acuerdo con las instrucciones de la sección "Dimensiones de desbastado".
M968122 FINISH INSTALLATION PASOS FINALES DE LA INSTALACIÓN FINIR L'INSTALLATION Slide COUPLING NUTS onto INLET SHANKS. Thread ESCUTCHEONS fully onto INLET SHANKS. Thread INLET SHANKS onto SUPPLY NIPPLES. Distance between INLET SHANK outlets must be 8" to match the VALVE.
To change direction of handle rotation, proceed as follows: If spout drips, operate handles several times from OFF to ON position. Do not force - handles turn only 90 ° . Turn HANDLE to OFF position. Remove HANDLE SCREW and HANDLE. Remove SPRING CLIP.
An important point after buying a device American Standard 8340.235.004 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Standard 8340.235.004 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Standard 8340.235.004 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Standard 8340.235.004 you will learn all the available features of the product, as well as information on its operation. The information that you get American Standard 8340.235.004 will certainly help you make a decision on the purchase.
If you already are a holder of American Standard 8340.235.004, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Standard 8340.235.004.
However, one of the most important roles played by the user manual is to help in solving problems with American Standard 8340.235.004. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Standard 8340.235.004 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
