Instruction/ maintenance manual of the product 7871.732 American Standard
Go to page of 6
4 6 12 7871 SERIES 5 SLOT T urn off hot and cold water supplies before beginning. CAUTION Insert SPOUT (1) and CABLE CONNECTOR (12) through center hole, making sure the SPOUT ESCUTCHEON (2) and SEAL WASHER (3) are properly seated. Assemble RUBBER WASHER (4) , BRASS W ASHER (5) and LOCKNUT (6) onto SPOUT SHANK (7) from under side of sink .
6 1 POP-UP KNOB (1) must be fully down. Fig. B. FLANGE GASKET AND POP-UP KNOB DOWN WHITE FOAM GASKET NOT VISIBLE DRAIN FLANGE Fig. A. Fig. B. Check DRAIN FLANGE in SI NK t o e nsu re t hat WHITE FOAM GASKET (3) is fully compressed and not visible. Fig.
Connect HOT water supply to inlet of left SHANK and COLD water supply to right SHANK using sealant, appropriate connectors, and COUPLING NUTS. Connect 1-1/4” O.D. tailpiece on POP-UP DRAIN to waste outlet. Thread TEE BODY (4) to SPOUT SHANK (5) . Thread HOSE CONNECTOR (6, 6A) to V AL VE CONNECTIONS (7, 7A) .
INST ALL HANDLES (Lever) INST ALL HANDLES (Cross) CHECK DRAIN CONNECTIONS 11 12 13 14 TEST INST ALLED FITTING With HANDLES (1) in OFF position, turn on WA TER SUPPLIES (2) and check all connections for leaks. Remove AERA TOR (3) . Operate both HANDLES (1) to flush water lines thoroughly .
Speed Connect™ Drain Troubleshooting Guide Disconnect the Cable from the Drain by threading the Cable Connector (1) counter-clockwise. Fig. A. Look at the area on the Drain Body where the Cable was attached and locate the component labeled as “Cam” and “Cam Cap” in the illustration.
STOPPER INSTALLATION PROCEDURE Locked Mode: Look at the Plastic Loop at the bottom of the Stopper and notice that the Loop is on one side of the Stopper.
An important point after buying a device American Standard 7871.732 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Standard 7871.732 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Standard 7871.732 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Standard 7871.732 you will learn all the available features of the product, as well as information on its operation. The information that you get American Standard 7871.732 will certainly help you make a decision on the purchase.
If you already are a holder of American Standard 7871.732, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Standard 7871.732.
However, one of the most important roles played by the user manual is to help in solving problems with American Standard 7871.732. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Standard 7871.732 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
