Instruction/ maintenance manual of the product 7502.103 American Standard
Go to page of 8
CULINAIRE COLLECTION™ STAINLESS STEEL KITCHEN SINKS MODELS 7501.103, 7502.103, 7502.403, 7504.103, 7507.103, 7510.103 790767-100 Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin.
Perimeter of sink Cutout 1 Drill a clearance hole inside the cutout line as marked on the countertop. AFTER THE CUTOUT IS DRAWN... ©AMERICAN STANDARD INC. 2002 Perimeter of sink Cutout 2 A B Single Bowl Double Bowl Trap Trap 3 5 4 6 8 9 7 Connect supply lines to faucet finger tight, and carefully bend to engage with the supply stops.
MODEL 7502 & 7504 MODEL 7507 MODEL 7510 MODEL 7501 11 3 1 9 11 6 2 4 13 12 3 1 5 14 11 5 13 42 13 1 3 12 4 2 6 14 12 2 4 10 5 6 9 10 7 8 7 8 9 10 6 8 7 5 7 8 Tightening Sequence For Clips ©AMERICAN STANDARD INC.
©AMERICAN STANDARD INC. 2002 Product names listed herein are trademarks of American Standard Inc.unless otherwise noted. Maintenance for stainless steel sinks: Please have the following in mind: Discoloration 790767-100 4 To keep the original quality of your Stainless Steel Sink, we recommend regular cleaning.
UNDERCOUNTER MOUNTING FOR CULINAIRE™ COLLECTION STAINLESS STEEL KITCHEN SINKS MODELS 7501.000, 7502.000, 7504.000, 7507.000 Installation Instructions 790766-100 Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years.
MODEL 7501.000 MODEL 7504.000 IMPORTANT: DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE OF TOLERANCES ESTABLISHED BY A.N.S.I. AND C.S.
A B Single Bowl INNER EDGE OF CUTOUT Double Bowl Trap Trap 1 2 Drill a clearance hole inside the cutout line. Connect supply lines to faucet finger tight, and carefully bend to engage with the supply stops. Tighten connections to faucet for secure seal.
Maintenance for stainless steel sinks: Please have the following in mind: Discoloration 790766-100 4 To keep the original quality of your Stainless Steel Sink, we recommend regular cleaning. Use a mild liquid dish detergent and water to clean the product after use.
An important point after buying a device American Standard 7502.103 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Standard 7502.103 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Standard 7502.103 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Standard 7502.103 you will learn all the available features of the product, as well as information on its operation. The information that you get American Standard 7502.103 will certainly help you make a decision on the purchase.
If you already are a holder of American Standard 7502.103, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Standard 7502.103.
However, one of the most important roles played by the user manual is to help in solving problems with American Standard 7502.103. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Standard 7502.103 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
