Instruction/ maintenance manual of the product SB40c HP
Go to page of 10
The HP StorageWorks SB40c is a half-height c-Class storage blade supporting up to six hot-plug Small Form Factor (SFF) Serial Attached SCSI (SAS) or Serial ATA (SATA) hard disk drives.
Key Features Features of the SB40c include: SFF (SAS/SATA) support - Delivering data transfer rates up 3Gb/s for SAS and 1.5Gb/s for SATA Support for up to six (6) SFF SAS or SATA drives provides up to 876GB of storage capacity in a half-height blade.
Fault Prevention The following features offer detection of possible failures before they occur, allowing preventive action to be taken: S.M.A.R.T.: Self Monitoring Analysis and Reporting Technology first developed at HP detects possible hard disk failure before it occurs, allowing replacement of the component before failure occurs.
Software Suite Systems Insight Manager Powerful server and server options/storage manager tool Monitors over 1,200 system wide parameters Configuration/Diagnostic Utilities HP Array Configuration Util.
Warranty Protected by HP Services and a worldwide network of HP Authorized Channel Partners. Three- year parts, 3 Year Labor and 3 Year on-site limited global warranty.
NOTE: For Configure to Order requirements within EMEA region, please consult local Sales Contact. NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis. NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: Some of the options listed below may be discontinued. c-Class Mezzanines HP PCI Express Mezzanine pass-thru card for HP BladeSystem 431643-B21 NOTE: Required to support the HP StorageWorks SB40c.
1-6 6 x SFF SAS or SATA Hot Plug Hard Drives Hard Drives SFF Serial Attached SCSI (SAS) Hard Drives Quantity Supported Position Supported Controller 36GB 15,000 rpm SAS SFF 72GB 15,000 rpm SAS SFF S 3.
HP StorageWorks SB40c storage blade Dimensions (HxWxD) 2.19 x 7.154 x 20.058 in (5.56 x 18.17 x 50.95 cm) Weight (unloaded) 8 lb (3.63 kg) Weight (loaded) 11 lb (4.
Environment-friendly Products and Approach End-of-life Management and Recycling Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to http://www.hp.com/go/green .
An important point after buying a device HP SB40c (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP SB40c yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP SB40c - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP SB40c you will learn all the available features of the product, as well as information on its operation. The information that you get HP SB40c will certainly help you make a decision on the purchase.
If you already are a holder of HP SB40c, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP SB40c.
However, one of the most important roles played by the user manual is to help in solving problems with HP SB40c. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP SB40c along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
