Instruction/ maintenance manual of the product ProLiant ML310e HP
Go to page of 43
The HP ProLiant ML310e Gen8 is perfect entry server for growing business. It provides an affordable and steadfast solution to small and medium business for small and medium business who are budget conscious and who have no in-house IT resources.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. Processor One of the following depending on Model Entry Processors NOTE: Intel® Celeron® G540 supports up to 1066MHz DDR3 memory speeds.
Upgradeability Upgradeable to 4 cores NOTE: Total 2 or 4 cores Up to 4 DIMM slots available for higher memory capacity Up to 8 SFF Hard Drive Bays; Or 4 LFF Hard Drive Bays 1 x8 and 1 x16 PCIe 3.
Expansion Slots Expansion Slot # Technology Bus Width* Connector Width Form Factor Notes 4 PCIe 3.0 X8 X16 Full Length/Full Height 3 PCIe 3.0 X8 X8 Full Length/Full Height 2 PCIe 2.0 X4 x8 Full Length/Full Height 1 PCIe 2.0 X1 X4 Half Length/Full Height *Indicates the number of physical electrical lanes running to the connector.
Storage Controller HP Dynamic Smart Array B120i Controller NOTE: Supports 3.0Gb/s SATA NOTE: Supports RAID 0/1/10 only. No FBWC support. For FBWC, a standup Smart Array Controller card must be configured. NOTE: For set up instructions, please refer to the HP ProLiant ML300 series server user guide.
Industry Standard Compliance ACPI 2.0b Compliant PCIe 3.0 Compliant PXE Support WOL Support Microsoft® Logo certifications USB 2.0 Support Server Power Cords The ProLiant ML310e Gen8 server is a tower server that ships standard with a 6' NEMA power cord that allows connection to wall outlets in a home or office.
http://h18000.www1.hp.com/products/quickspecs/14209_na/14209_na.html System Fans One (1) Non-redundant system fan ships standard One (1) Non-redundant PCIe fan ships standard Operating Systems and Vir.
HP Remote Support: Embedded Remote Support functions builds on the already established HP Insight Remote Support application that can run either on a stand-alone central system, or as a plug-in to HP Systems Insight Manager.
HP Insight Management HP Service Pack for ProLiant (SPP) HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM) version 5 provide a new, comprehensive approach to firmware and system software maintenance. Together they provide better operating stability and ensure maximum uptime.
Warranty This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase.
HP Insight Management HP Insight Control HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, remote control, and optimize your IT infrastructure through a single, simple management console.
Factory Express Portfolio for Servers and Storage HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.
Service and Support HP Technology Services for Industry Standard Servers and BladeSystem Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who understands your increasingly complex business technology environment.
HP Installation and Startup for Insight Control Software / HP SIM Provides for the deployment and basic configuration of HP Insight Control or HP SIM (Systems Insight Manager) on HP ProLiant ML and DL series servers or HP BladeSystem servers http://h20195.
replaced by HP due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that have not failed. SSD/Flash Drives that are specified by HP as consumable parts and/or that have ex.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section of this QuickSpecs.
Base Models HP ProLiant ML310e Gen8 E3-1220v2 1P 2GB-U Hot Plug 4 LFF 460W PS Base Server 674786-001 Processor(s) (1) Intel® Xeon® E3-1220v2 (3.1GHz/4-core/8MB/69W, HT) Processor Cache Memory 8MB (1.
HP ProLiant ML310e Gen8 E3-1220v2 1P 4GB-U Hot Plug 4 LFF 350W PS Server/S-Buy 686232-S01 Processor(s) (1) Intel® Xeon® E3-1220v2 (3.1GHz/4-core/8MB/69W, HT) Processor Cache Memory 8MB (1 x 8MB) L3 .
HP ProLiant ML310e Gen8 E3-1230v2 1P 8GB-U Hot Plug 4 LFF 350W PS Server/S-Buy 686234-S01 Processor(s) (1) Intel® Xeon® E3-1230v2 (3.3GHz/4-core/8MB/69W, HT) Cache Memory 8MB (1 x 8MB) L3 cache Memo.
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on configurable product offerings and requirements.
Step 2: Choose Required Options (only one of the following from each list unless otherwise noted) HP Processors Entry Processors NOTE: Intel® Celeron® G540 supports up to 1066MHz DDR3 memory speeds. Intel® Pentium® G860 support up to 1333 MHz DDR3 memory speeds Celeron processor, performance for 1600MHz memory is clocked down to 1066MHz.
HP Common Slot Gold Power Supplies NOTE: The following Power Supplies offer 92% Efficiency. HP 460W Common Slot Gold Hot Plug Power Supply Kit 503296-B21 Enablement Kit HP 4U Redundant Power Supply Enablement Kit NOTE: The HP 4U Redundant Power Supply Enablement Kit (675843-B21) must be installed when using HP Common Slot power supplies.
NOTE: Some options may not be integrated at the factory. Contact your local sales representative for additional information. HP Unique Options HP 4U 4 Large Form Factor Hot Plug Hard Drive Backplane Kit NOTE: The LFF Kit is a backplane kit designed for going from NHP LFF to hot-plug LFF.
hard drive QuickSpecs for details. SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive 652589-B21 HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive 652583-B21 HP 450GB 6G SAS 10K rpm SFF (2.
3G SATA MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives HP 100GB 3G SATA MLC SFF (2.5-inch) SC Enterprise Mainstream 3yr Warranty Solid State Drive 653112-B21 3G SATA MLC Hot Plug LFF (3.5-inch) Enterprise Mainstream Solid State Drives HP 100GB 3G SATA MLC LFF (3.
HP Power Supplies NOTE: Mixing of power supplies in the same server is not supported. All power supplies inside a server must be exactly the same model.
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator.
NOTE: For additional License Kits, including electronic licensing options, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13019_na/13019_na.
HP Storage Controllers SAS Controllers HP Smart Array P222 Controller HP Smart Array P222/512 FBWC 6Gb 1-port Int/1-port Ext SAS Controller 631667-B21 HP Smart Array P420 Controller HP Smart Array P42.
HP Backup & Recovery Software HP Basic Upgrade to Data Protector Express V6 for 1 Server E-LTU TC333BAE HP Data Protector Express V6.0 for 1 Server E-LTU TC330BAE HP Data Protector Express V6.0 for 10 Server E-LTU TC332BAE HP Data Protector Express V6.
HP Disk Backup NOTE: For the complete range of RDX drives and media see: http://www.hp.com/go/rdx . For hardware and software compatibility of HP disk backup products see: http://www.
NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements, and specifications for UPS and PDU units.
HP USB and SD Options HP 4GB Secure Digital High Capacity Flash Media Kit NOTE: Blank SD media device is supported for use with VMware and Citrix. SD media must be installed in the internal slot of the ProLiant server. Learn more at http://www.hp.com/go/proliantvirtualization .
NOTE: For more information, customer/resellers can contact: http://www.hp.com/services/carepack QuickSpecs HP ProLiant ML310e Generation 8 (Gen8) Additional Options DA - 14339 North America — Versio.
NOTE: Memory configurations listed do not apply to "Factory Integrated Models". HP SmartMemory New HP SmartMemory now provides additional protection for your servers. With HP Authentication it can verify that you have true HP Qualified Memory in your HP ProLiant Gen8 server.
Memory Slot DIMM1C DIMM2A DIMM3D DIMM4B Standard (Base Model) 2 GB Empty 2 GB Empty Empty Standard (Performance Model) 4 GB Empty 4 GB Empty Empty Maximum 32 GB 8 GB 8 GB 8 GB 8 GB Memory Speed by Pro.
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low Voltage Memory Kit 647907-B21 HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory Kit 669324-B21 HP 8GB.
1 - 8 8 x 2.5" (SFF) SAS/SATA hard drive bays A Removable Optical Drive B Removable Optical Drive NOTE. Once Redundant Power Supply is installed, Bay A will be the only media bay available for use. 1 - 4 4 x 3.5" (LFF) SAS/SATA hard drive bays A Removable Optical Drive B Removable Optical Drive NOTE.
Position Supported Controller Controller/HBA Option Kit Part Number HP USB Tape Drives DAT 72 DAT 160 Internal or External USB 2.0 Port N/A HP USB Rack Mount Kits 1U USB Rack-Mount Kit External USB 2.
HP D2D Backup Systems, iSCSI D2D2500i D2D4000i External Embedded Network Controller. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended. HP D2D Backup Systems, Fibre Channel D2D4000fc External Direct server attach is not supported, requires connection via SAN fabric.
System Unit Tower Dimensions (H x W x D) (with feet/bezel) 14.5.x 6.89 x 18.71 in (36.82 x17.5 x 47.52 cm) Tower Weight (approximate) Maximum (all hard drives, power supplies, and processors installed) 41.8 lb (18.96 kg) Minimum (one hard drive, power supply, and processor installed) 25.
the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). Idle L WAd 4.3 B L pAm 26dB-A Operating L WAd 4.4 B L pAm 28dB-A NOTE: The Listed sound levels apply to standard shipping configurations.
HP Ethernet 1Gb 2-port 330i Adapter Network Interface 10Base-T/100Base-TX/1000Base-TX Compatibility IEEE 802.3 10Base-T IEEE 802.3ab 1000Base-T IEEE 802.
An important point after buying a device HP ProLiant ML310e (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP ProLiant ML310e yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP ProLiant ML310e - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP ProLiant ML310e you will learn all the available features of the product, as well as information on its operation. The information that you get HP ProLiant ML310e will certainly help you make a decision on the purchase.
If you already are a holder of HP ProLiant ML310e, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP ProLiant ML310e.
However, one of the most important roles played by the user manual is to help in solving problems with HP ProLiant ML310e. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP ProLiant ML310e along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
