Instruction/ maintenance manual of the product ProDisplay P231 Head Only HP
Go to page of 20
User Guide.
© 2013, 2014 Hewlett-Packard Development Company, L.P. The only warrantie s for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
About This Guide This guide prov ides information on m onitor features, setting up the monitor, and technical specifications. WARNING! Text set off in this manner indi cates that failure to follow di rections could result in bodily harm or l oss of li fe.
iv About Thi s Guide.
Table of contents 1 Produc t Feat ures ........ ......... ......... ............ ......... ............ .......... .......... ............ ......... ....... ..... ........... .......... ....... 1 2 Sett ing Up the Moni tor .... .......... ............
vi.
1 Product Features These monitor models have an active matrix, thin-film tra nsistor (TFT) panel. Fe atures of the monitors include: ● 49.41-cm (19.5-inch) diagonal viewable area disp lay with 1600 .
● Energy saver feat ure to meet requir ements for reduced powe r consumption ● Safety guidelines, certif ications, and regula tory notices fo r these products are availa ble in the HP LCD Monitors.
2 Setting Up the Monitor To set up the monitor, en sure that the power is turn ed off to the mon itor, compu ter system, and other attached devices, then follow the instructions below. Attaching the Monitor Base CAUTION: The screen is fragile. Avoid tou ching or applying pressure to the screen ; doing so can cause damage.
3. Push the base onto the stan d until it clicks into place. Rear Components Component Function 1 AC Power Conn ector Connects the AC power cord to the monitor. 2 DVI-D Connects the DVI-D cable to the monitor. 3 VGA Connects the VGA cable to the monitor.
Connecting the Cables 1. Place the monitor in a convenient, well- ventilated l ocation near the computer. 2. Remove the cable management cl ip from the stand by pul ling back on th e two sides of the clip. 3. Connect a VGA signal ca ble or DVI-D signal cable.
● For DVI digital operation, use the DVI-D sign al cable provided. Connect th e DVI-D signal cable to the DVI connector on the rear of the monitor an d the other end to th e DVI connector on the computer.
4. Connect one end of th e power cord to the AC power connecto r on the back of th e monitor, and the other end to an electrical wall outlet. WARNING ! To redu ce the risk of electric shock or d amage to the equ ipment: Do not disable th e power cord groun ding plug.
Front Panel Controls Table 2-1 Monito r Front Panel Control s Control Function 1 Menu Opens, selects or exits the OSD menu. 2 Minus If the OSD menu is on, press to navigate backwar d through the OSD menu and decrease adjustment levels.
Adjusting the Monitor Tilt the monitor panel forward or backwar d to set it to a comfortabl e eye level. Turning on the Monitor 1. Press the po wer button on th e computer to turn on the computer. 2. Press the power button on the front of the monitor to turn on the monitor.
Locating the Rating Labels The rating labels on the mon itor provide the sp are part number, product numbe r, and serial number. You may need th ese numbers when conta cting HP a bout the moni tor model. The ra ting labels are located on the re ar panel of the monitor di splay head.
3 Finding More Information Refer to the HP LCD Monitors Reference Guide includ ed on the di sc with your m onitor fo r additional information on: ● Optimizing monitor performance ● Safety and main.
4 Technical Specifications NOTE: All specifications represent the typical sp ecifications provid ed by HP's componen t manufacturers; a ctual performance may vary. Table 4-1 ProDispl ay P200 Maximum Weight (head+stand only, unpacked) 2.85 kg 6.28 lbs Dimensions (include stand) Height Depth Width 34.
Table 4-2 ProDi splay P231 (continu ed) Maximum Graphic Resolution 1 920 x 1080 (60 Hz) analog inpu t 1920 x 1080 (60 Hz) digital input Optimum Graphic Resolution 1920 x 1080 (60 Hz) analog input 1920.
Table 4-4 ProDi splay P231 Factory Preset Modes (continue d) 4 1024 × 768 48.363 60.004 5 1280 × 720 45.00 60.00 6 1280 × 1024 63.981 60.02 7 1440 × 900 55.
An important point after buying a device HP ProDisplay P231 Head Only (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP ProDisplay P231 Head Only yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP ProDisplay P231 Head Only - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP ProDisplay P231 Head Only you will learn all the available features of the product, as well as information on its operation. The information that you get HP ProDisplay P231 Head Only will certainly help you make a decision on the purchase.
If you already are a holder of HP ProDisplay P231 Head Only, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP ProDisplay P231 Head Only.
However, one of the most important roles played by the user manual is to help in solving problems with HP ProDisplay P231 Head Only. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP ProDisplay P231 Head Only along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
