Instruction/ maintenance manual of the product C HP
Go to page of 12
Hewlett - Packard Disposable Cartridge Maintenance Manual (Applicable to the Following Cartridges: HP51626A, HP51638A, HP51633M, HPC6117A, HP51640(A,C,M,Y), HP51641A, HPC6105A, HPC1823A, HPC6116A, HP51645A, HPC6104A, HPC6168A, HPC6169A, and HPC6170A.
2 Contents 1. INTRODUCTION ....................................................................................................... 3 1.1. TIJ Background ..................................................................................................
3 1. INTRODUCTION This document acts as a guide for the maintenance and care of Hewlett - Packard disposable pr int cartidge products including the HP51626A, HP51638A, HP51633M, HPC6117A, HP51640(A,C,M,Y), HP51641A, HPC6105A, HPC1823A, HPC6116A, HP51645A, HPC6168A, HPC6169A, HPC6170A, and HPC6104A.
4 2. PRINT CARTRIDGE CARE 2.1 Set - up Once the cartridge is out of the box it can be easily snapped into the carriage. It is i mportant to remove the tape from the printhead before the cartridge is snapped into place. The cartridge will not function with the tape still in place.
5 3. PRINTHEAD AND INTERCONNECT CA RE 3.1 Inserting and Removing the Print Cartridge The print cartridge should stay in the carriage at all times except when the operator is ? Replacing it ? Cleaning it ? Storing it The print cartridge should never be: ? Shaken ? Dropped ? Hit against the pal m of one’s hand or any other hard surface (e.
6 Never use the following to wipe the printhead : ? Industrial paper towels (These cloths usually contain a high recycle content and are abrasive.) ? Toilet paper (These cloths a re usually not fiberless.) ? Sponge (Particles from the sponge can be left behind on the nozzle plate.
7 Figure 2: Direction of Wiping for th e HP51645A, the HPC6104A, the HP51641A, the HPC6105A, the HPC1823A, the HPC6116A, the HPC6168A, the HPC6169A, and the HPC6170A. The direction of the wipe should especially be monitored on the tri - color pens such as the HP51641A, the HPC6105A, the HPC1823 A, and the HPC6116A.
8 Figure 4: Direction of Wiping for the HP51640(A,C,M,Y) In all three wiping configurations the printhead should b e pointing down while it is being wiped. This position will prevent the nozzles from pulling little bubbles into the firing chambers. Applying heavy pressure is not necessary to clean the particles off of the printhead.
9 - When the cartridge is removed from the carriage, it is important to hold the cartridge by the black side covers of the cartridge. - The print cartridge should never be shaken, dropped, or hit against a hand or any hard surface. - Never use industrial paper towels, toilet paper or sponge to wipe the printhead.
10 4. PEN FAILURE ANALYSIS 4.1 Trouble Shooting Guide There are several things that can be done to recover damaged cartridges. The following list acts to troubleshoot any problems that may appear. Problem Example Action Cartridge will not print “Sheet is blank even after it has gone underneath cartridge(s).
11 Black streaks around text or st reaks the same color of the ink in the cartridge ? Wet wipe the cartridge (There is ink buildup.) 5. SUPPLIES ORDERING INFORMATION 5.
12 If outside of the US -- Call the TexWipe International Customer Service and Technical Support Line at 1 - 201 - 327 - 9100 (ext 325 or 254). The TexWipe customer service representative will then determine a local distributor for the TexWipe Products.
An important point after buying a device HP C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP C you will learn all the available features of the product, as well as information on its operation. The information that you get HP C will certainly help you make a decision on the purchase.
If you already are a holder of HP C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP C.
However, one of the most important roles played by the user manual is to help in solving problems with HP C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
