Instruction/ maintenance manual of the product t5630 HP (Hewlett-Packard)
Go to page of 7
Using the Enhanced Write Filter HP Windows® XP Embedded-based thin clients: t5630 t57x0 Abstract .............................................................................................................................................. 2 Introduction .
2 Abstract This paper contains instructions for using the Enha nced Write Filter console application command-line tool, the Enhanced Write Filter GUI and th e Enhanced Write Filter st atus service. Introduction Windows XP Embedded includes the Enhanced Write Filter (EWF) console application command-line tool, Ewfmgr.
3 Enhanced Write Filter Status Service This service creates an icon in the System Tray that shows the status of EWF. The EWF Status icon will appear as a red “lock” when disabled, a green “l ock” when enabled, and a yellow “lock” when the state is set to change on the next boot.
4 Enhanced Write Filter GUI The EWF GUI can be accessed through the Contr ol Panel or the Administrative Tools option fo r the administrator. To access the EWF GUI, perform the following st eps: 1.
5 EWF GUI Buttons The current version of the EWF GUI includ es the following buttons: Button Description Enable EWF This button is the same as executing ewfmgr.exe c: -Enable from the DOS prompt. Disable EWF This button is the same as executing ewfmgr.
6 Using Boot Commands To use the EWF manager boot commands, type the following syntax in a command prompt: EWFMGR <drive-letter> -[boot command]. Note Because the EWF manager comma nds are executed on the next boot, you must reboot the system for the com mand to take effect.
© 2008 Hewlett-Packard Development Com pan y, L.P. The inform ation contained herein is subject to change without notice. The only warran ties for HP products and services are set fort h in the expr ess warranty st atements acc ompanying such produc ts and services.
An important point after buying a device HP (Hewlett-Packard) t5630 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) t5630 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) t5630 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) t5630 you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) t5630 will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) t5630, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) t5630.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) t5630. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) t5630 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
