Instruction/ maintenance manual of the product 7182.000 American Standard
Go to page of 7
CHANDLER™ AMERICAST™ ISLAND SINK WITH FAUCET HOLES 7182.001/7182.803 WITHOUT FAUCET HOLES 7182.000 ISLAND SINK MODEL 7182.001/803 ISLAND SINK MODEL 7182.000 Installation Instructions 791267-400 Rev. C Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years.
AMERICAST ® LIMITED LIFETIME WARRANTY If an American-Standard Americast ® brand product is found to be defective in materials or workmanship, after inspection by an authorized American-Standard representative, American- Standard will repair or, at its option, exchange the product for a similar model.
UNDERCOUNTER MOUNTING FOR CHANDLER, LAKELAND, PALISADE AND SILHOUETTE™ KITCHEN SINKS MODELS 7145, 7162, 7163 STANDARD, 7103, 7172, 7173, 7179, 7182, 7183, 7185, 7196, 7255 Installation Instructions 790088-100 REV. H Thank you for selecting American-Standard.
965mm (38) MODEL 7196 559mm (22) 838mm (33) 559mm (22) MODEL 7145, 7163 STANDARD,7179 559mm (22) MODEL 7172 457mm (18) MODEL 7185 IMPORTANT: DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE OF TOLERANCESESTABLISHED BY A.N.S.I. AND C.S.
A B Single Bowl Double Bowl Trap Trap 1 2 Drill a clearance hole inside the cutout line. Connect supply lines to faucet finger tight, and carefully bend to engage with the supply stops. Tighten connections to faucet for secure seal. Attach at least four of the support clips to the underside of the countertop as shown below.
790088-100 REV. H Refer to American Standard roughing-in information for specific dimensions for each model. Below are the dimensions of each sink. Make sure this area is available to mount the sink. Unfold the template and refer to the instructions below.
©AMERICAN STANDARD INC. 2003 AMERICAST ® LIMITED LIFETIME WARRANTY If an American-Standard Americast ® brand product is found to be defective in materials or workmanship, after inspection by an authorized American-Standard representative, American-Standard will repair or, at its option, exchange the product for a similar model.
An important point after buying a device American Standard 7182.000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Standard 7182.000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Standard 7182.000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Standard 7182.000 you will learn all the available features of the product, as well as information on its operation. The information that you get American Standard 7182.000 will certainly help you make a decision on the purchase.
If you already are a holder of American Standard 7182.000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Standard 7182.000.
However, one of the most important roles played by the user manual is to help in solving problems with American Standard 7182.000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Standard 7182.000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
