Instruction/ maintenance manual of the product OptiPrinter PRO CD/DVD HP (Hewlett-Packard)
Go to page of 37
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 1 - COMP LETE SOLUTIONS FOR ON - DEMAND CD & DVD PRODUCTION Photo - Quality CD/DVD Inkjet Printer OPERATING & MAINTENANCE MANUAL.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 2 - Thank you for purchasing a Verity Systems OptiPrinter PRO OPERATING & MAINTENANCE MANUAL Document Reference No. TP 000 119 (Rev 1.01) Production Standard ZZ 004 821 VERITY SYSTEMS LTD V ERITY SYSTEMS, INC.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 3 - WARNING To avoid electrical shock hazards, unit covers should only be removed by authorized personnel. © COPYRIGHT This document is the property of Verity Sys tems and it may not be reproduced, copied or exhibited to a third party without the written permission of Verity Systems.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 4 - SOFTWARE WARRANTY (LIMITED) If you discover physical defects in the media on which the software is distributed or in the User’s Manual, Verity Systems will replace the media or manual for a period of ninety (90) days after the purc hase by the retail customer.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 5 - TABLE OF CONTENTS Section 1 INTRODUCTION 7 - 8 1.1 Overview………………………………………………………………. 7 1.2 Features……………………………………………………………….
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 6 - Section 12 TECHNICAL SUPPORT 27 Appendix A OTHER GRAPHICS SOFTWARE PACKAGES 28 - 34 CorelDRAW & Photoshop………………………………………….
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 7 - SECTION 1: INTRODUCTION 1.1 Overview Verity Systems, world leading developers & manufacturers of optical disc duplication & printing systems, has launched a brand new, drawer mechanism CD/DVD printer: the OptiPrinter PRO.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 8 - Print Speed: 25% mono coverage @ normal, text quality approx.* 16 seconds per disc 25% mono coverage @ normal, inkjet quality approx.* 19 seconds per disc 100% full colour coverage @ normal, inkjet quality approx.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 9 - SECTION 3: POWER ON 1. Connect the power cable to the printer and plug into the power supply. 2. Power up the OptiPrinter PRO by pressing the Power Button. (See Fig. 1) 3. The Power Button light will flash for a short period then remain illuminated.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 10 - Caution! Always use the Power button to turn the printer on and off. Using a power strip, surge protector, or a wall - mounted switch to turn the printer on and off may cause printer failure. 4.5 CD T ray Button Pressing this button will slide the CD tray back and forth into the printer.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 11 - 3. Open the printer cover 4. Using your hand, slowly slide the CD tray back into the printer until approximately 1 inch of the CD tray remain s protruding from the front of the printer. 5. Fit Part 2 of the adaptor matching the pin on the adaptor to the hole on the CD tray (Fig 5 & Fig.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 12 - SECTION 7: INSTALLING THE PRINTER SOFTWARE Note: Your OptiPrinter PRO should not be connected to your PC during the initial software installation. If connected, remove the USB and power cables from the pri nter .
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 13 - d. When prompted, select Local Port e. When the Wizard asks for the name of the printer, click the Have Disk button and navigate to the enu/drivers/win2k_xp/OptiPrinter_Pro.inf file on the CD - ROM and select Open and then OK .
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 14 - Use the tabs along the top to create your artwork Canvas: Select a blank canvas or choose from a wide selection of backgrounds included with Discus.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 15 - Once your artwork is complete, select the “Print” tab Choose the OptiPrinter Pro from the Select template menu Next, select Setup….
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 16 - Use the nudge ke ys (as shown in Fig. 14 on the previous page) to move your template back & forth and up & down until your test prints centrally onto your disc. Once the test print has been perfected, you are now ready to print the artwork you created.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 17 - SECTION 10: SETTING PRINTER PREFERENCES You can choose a number of printing options on your OptiPrinter PRO from the Printer Preferences menu. 10.1 Paper/Quality This screen allows you to select the appropriate output quality for your disc.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 18 - Print Task Quick Sets In addition to using the Dis c Surface Type and Print Quality options to set your output quality, the OptiPrinter PRO is p.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 19 - This tab allows to you: a. Select multiple copies to print in the Copies field. b. Click the Print Preview checkbox and a preview of your print image will automatically appear on scr een each time you print.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 20 - 10.3 Colour Saturation: Intensity of printed colour Brightness: Lightness or darkness or printed colours Colour Tone: Warmth or coolness of printed colours Colour Space: Defines the range of colours that can be printed.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 21 - 10.4 Services Print a Test Page : Prints a test image onto a CD (ensu re you have a disc in the OptiPrinter PRO before selecting this option).
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 22 - Mask Type: Select the mask that matches the media to which you wish to print on. Choose from the following: Standard CD/DVD (120mm) Business Car.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 23 - 10.6 Calibration Your OptiPrinter PRO comes from the factory pre - calibrated to print the image in the centre of the CD. However, during the life of the printer it may be necessary to recalibrate it to ensure a perfect image position on the CD.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 24 - Follow the on screen instructions. 1. Step 1: Set both offsets to ‘0’. This is the default setting. 2. Step 2: Place a disc onto the CD tray and retract the tray into the printer. Click ‘1 st Test Print’.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 25 - Example 2 The 2 nd test image prints out of line as shown in Example 2 (the red broken circles are printing too far right on the X - axis and too far down on the Y - axis).
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 26 - SECTION 11: ERRORS You can identify many common problems using the lights on the printer’s control panel. The Following list highlights common errors and the recommended corrective measures: Print Cancel Button Print Cartridge Status Light Resume Button & Light Power Button light 1.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 27 - SECTION 12: TECHNICAL SUPPORT You should first attempt to get technical assistance from your dealer or distributor. Verity Systems support personnel can be reached at: VERITY SYSTEMS LTD VE RITY SYSTEMS, INC.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 28 - APPENDIX A: Using other Graphics Software Packages CorelDRAW & Photoshop While Discus offers a quick and easy method for designing CDs, if greater control & more flexibility is what you need, you may wish to use a package such as Photoshop or CorelDRAW to design your discs.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 29 - Understanding the Mask Interface The OptiPrinter PRO mask interface, located in the Printer Preferences, looks like this: Using the mask, adjustment s can be made to match exactly the size of media you wish to print.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 30 - Note: The maximum print area for a CD is 120mm in diameter. The mask will not accom modate and the printer will not print beyond this diameter. However, this outer diameter can be reduced to accommodate the slightest variation in printable media.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 31 - Mask Origin: The Calibration tab should be used to align your print image with the CD, however, the masks origin can also be used to more the position of the image by entering values in the X & Y axis.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 32 - APPENDIX B: RECOMMENDATIONS Positioning your OptiPrint er PRO ♦ Ensure your OptiPrinter PRO is placed on a flat surface. ♦ Ensure there is sufficient ventilation around your printer. ♦ Avoid places subject to dust, moisture & vibrations.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 33 - STANDARD TERMS AND CONDITIONS OF SALE In these conditions “Ver ity Systems” is Verity Systems Limited, having its registered office at Verity House, 2, Eastern Road, Aldershot, Hampshire, GU12 4TD, UK.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 34 - accordingly. The Purchaser acknowledges that Verity Systems does not write software comprised in Products sold by it and, accordingly, the Purch.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 35 - 11. FORCE MAJEURE Verity Systems shall not be liable for failure to perform or delay in performance of any contract or f or the loss or damage t.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 36 - a) cancel all or any part of any discount which might otherwise have been due under the terms of the contract; b) suspend any outstanding delive.
OptiPrinter PRO CD/DVD Inkjet Printer ZZ 004 821 - 37 - VERITY SYSTEMS LTD VERITY SYSTEMS, INC. 2 Eastern Road 5441 Merchant Circle, Unit A Aldershot Placerville Hampshire California GU12 4TD 95667 United Kingdom United States Tel: +44 (0) 1252 317000 Tel: (530) 626 - 9363 Fax: +44 (0) 1252 316555 Fax: (530) 626 - 9395 Email: sal es@veritysystems.
An important point after buying a device HP (Hewlett-Packard) OptiPrinter PRO CD/DVD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) OptiPrinter PRO CD/DVD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) OptiPrinter PRO CD/DVD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) OptiPrinter PRO CD/DVD you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) OptiPrinter PRO CD/DVD will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) OptiPrinter PRO CD/DVD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) OptiPrinter PRO CD/DVD.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) OptiPrinter PRO CD/DVD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) OptiPrinter PRO CD/DVD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
