Instruction/ maintenance manual of the product J9561A#ABA HP (Hewlett-Packard)
Go to page of 33
Models HP 1410-8G Switch J9559A HP 1410-16G Switch J9560A HP 1410-24G-R Switch JG708A HP 1410-24G Switch J9561A HP 1410-8 Switch J9661A HP 1410-16 Switch J9662A HP 1410-24 Switch J9663A HP 1410-24-R S.
NEW Energy-efficient Ethernet support supports new IEEE 802.3az standard; allows lower power consumption when operated with IEEE-compliant client devices in 100 Mb/s mode only (JG708A, J9662A and J966.
Build To Order : BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack- Shippable solution. HP 1410-8G Switch J9559A 8 autosensing 10/100/1000 ports .
HP 1410-24-2G Switch J9664A 24 autosensing 10/100ports 2 autosensing 10/100/1000 ports 1U - Height See Configuration Note:2 Configuration Rules: Note 1 The following Transceivers install into this swi.
HP Premier Flex LC/LC OM4 2f 2m Cbl QK733A HP Premier Flex LC/LC OM4 2f 5m Cbl QK734A HP Premier Flex LC/LC OM4 2f 15m Cbl QK735A HP Premier Flex LC/LC OM4 2f 30m Cbl QK736A HP Premier Flex LC/LC OM4 .
HP 1410-8G Switch (J9559A) I/O ports and slots 8 RJ-45 autosensing 10/100/1000 ports; Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.
ESD IEC 61000-4-2 Radiated IEC 61000-4-3 EFT/Burst IEC 61000-4-4 Surge IEC 61000-4-5 Conducted IEC 61000-4-6 Power frequency magnetic field IEC 61000-4-8 Voltage dips and interruptions IEC 61000-4-11 .
MAC address table size 8192 entries Environment Operating temperature 32°F to 104°F (0°C to 40°C) Operating relative humidity 15% to 95% @ 104°F (40°C), noncondensing Nonoperating/Storage temperature -40°F to 158°F (-40°C to 70°C) Nonoperating/Storage relative humidity 15% to 90% @ 149°F (65°C), noncondensing Altitude up to 10,000 ft.
Installation with minimum configuration, system-based pricing (U4826E) Installation with HP-provided configuration, system-based pricing (U4830E) 4-year, 4-hour onsite, 13x5 coverage for hardware (UR8.
Maximum power rating 16 W Notes Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
I/O ports and slots 22 RJ-45 autosensing 10/100/1000 ports; Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.
Radiated IEC 61000-4-3 EFT/Burst IEC 61000-4-4 Surge IEC 61000-4-5 Conducted IEC 61000-4-6 Power frequency magnetic field IEC 61000-4-8 Voltage dips and interruptions IEC 61000-4-11 Harmonics IEC 61000-3-2 Flicker IEC 61000-3-3 Notes Use only supported genuine HP mini-GBICs with your switch.
Operating relative humidity 15% to 95% @ 104°F (40°C), noncondensing Nonoperating/Storage temperature -40°F to 158°F (-40°C to 70°C) Nonoperating/Storage relative humidity 15% to 90% @ 149°F (65°C), noncondensing Altitude up to 10,000 ft.
3 Yr 6 hr Call-to-Repair Onsite (UW386E) 1-year, 6 hour Call-To-Repair Onsite for hardware (HR845E) Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
country option. Safety UL 60950-1; CSA C22.2 60950-1; IEC 60950-1:2005; EN 60950-1:2006 + A11:2009 Emissions FCC Rules Part 15, Subpart B Class A Immunity Generic EN 55022 CISPR 22 EN EN 55024, CISPR .
Performance 100 Mb Latency < 11 µs (LIFO 64-byte packets) Throughput 3.5 Mpps (64-byte packets) Switching capacity 4.8 Gb/s MAC address table size 8192 entries Environment Operating temperature 32.
Flicker IEC 61000-3-3 Notes IEEE 802.3az Energy Efficient Ethernet protocol is supported by the HP 1410-24G-R (JG708A), HP 1410-16 (J9662A) and HP 1410-24 (J9663A) Switches.
Voltage 100 - 240 VAC DC voltage 3.3 V Current 1.1 A Maximum power rating 3.6 W Notes Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
I/O ports and slots 24 RJ-45 autosensing 10/100 ports; Duplex: half or full (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX) 2 RJ-45 autosensing 10/100/1000 ports; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.
ESD IEC 61000-4-2 Radiated IEC 61000-4-3 EFT/Burst IEC 61000-4-4 Surge IEC 61000-4-5 Conducted IEC 61000-4-6 Power frequency magnetic field IEC 61000-4-8 Voltage dips and interruptions IEC 61000-4-11 .
HP 1410 Switch series accessories Cables HP 0.5 m Multimode OM3 LC/LC Optical Cable AJ833A HP 1 m Multimode OM3 LC/LC Optical Cable AJ834A HP 2 m Multimode OM3 LC/LC Optical Cable AJ835A HP 5 m Multim.
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication. HP 0.5 m Multimode OM3 LC/LC Optical Cable (AJ833A) Cabling Cable type : 50.
HP 1 m Multimode OM3 LC/LC Optical Cable (AJ834A) Cabling Cable type : 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492.
HP 2 m Multimode OM3 LC/LC Optical Cable (AJ835A) Cabling Cable type : 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492.
HP 5 m Multimode OM3 LC/LC Optical Cable (AJ836A) Cabling Cable type : 50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492A.
HP 15 m Multimode OM3 LC/LC Optical Cable (AJ837A) Cabling Cable type : 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-49.
HP 30 m Multimode OM3 LC/LC Optical Cable (AJ838A) Cabling Cable type : 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-49.
HP 50 m Multimode OM3 LC/LC Optical Cable (AJ839A) Cabling Cable type : 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-49.
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable (QK732A) Notes Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable (QK734A) Notes Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable (QK736A) Notes Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
HP X121 1G SFP LC SX Transceiver (J4858C) A small form-factor pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550 m on multimode fiber. Ports 1 LC 1000BASE-SX port; Duplex: full only Physical characteristics Dimensions: 2.
Notes A mode conditioning patch cord may be needed in some multimode fiber installations. Wavelength: 1310nm Power Consumption: < 500mW Typical Services Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers.
An important point after buying a device HP (Hewlett-Packard) J9561A#ABA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) J9561A#ABA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) J9561A#ABA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) J9561A#ABA you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) J9561A#ABA will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) J9561A#ABA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) J9561A#ABA.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) J9561A#ABA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) J9561A#ABA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
