Instruction/ maintenance manual of the product A9834-9001B HP (Hewlett-Packard)
Go to page of 247
User Ser vice Gu ide HP In tegr ity Su perdome/ sx200 0 Serv er Seco nd Edi tion Manufacturi ng P a rt Number : A9834-9001B September 2006.
2 Legal Noti c es Copyright 2006 Hew lett-Packard Develop men t Com pany , L.P . The i nform at ion c ont ai ned h ere in is s ubj ec t to cha nge wi thout n oti ce. The only w arrant ies for H P pr oducts and s er vices a re set forth in the ex press w arranty st a tements accom panying such p roducts and s ervices.
Con t en ts 3 1. Over view Ser v er Histor y and Specif i cat ions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Ser v er Components . . . . . . . . . . . . . . . . . . . . . . . . . .
Con tents 4 Hard ware Correct ed Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Glo bal S hared M emory E rrror s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Con t en ts 5 Ins tallin g and V erify ing the PDCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 03 V olta ge Che c k . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Con tents 6 Booti ng Re d Hat En terpri se Linux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 65 Booti ng Su SE Li nux En t erpr ise Serv er . . . . . . . . . . . . . . . . . . . . . . . . . .
Con t en ts 7 P owerin g Off the Syst em Usi ng the pe Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 Tur n ing On Hous ekeepi n g P ower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Con tents 8.
Ta b l e s 9 T able 1-1. HSO LED Stat us Indica tor Meaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 T able 1-2. Supported P rocessor s and Minim um Fir mware V ersion Requir ed . . . . . . . . . . . . . . .
Ta b l e s 10.
Fig u re s 11 Fi gure 1- 1. Superdome Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Fi gure 1- 2. U GU Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fig u re s 12 Fi gure 3- 31. P ow er Supply Indi c ator LED Deta il . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 09 Fi gure 3- 32. Re moving Front EMI Pa nel Sc rew . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fig u re s 13 Fi gure C-1 6. Pow er Status F i rst Wi nd o w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 6 Fi gure C-1 7. Pow er Status W indow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fig u re s 14.
15 Ab out T hi s Doc u me nt This document c ontains a syst em overvi ew , s ystem s pecific paramete r s, how to inst all the system, and operat ing system specific s for the s y stem.
16 Intende d Audience Th is doc ument is in tend e d for HP t rain ed Cust omer Suppo rt C on sult ants . Do c u me nt Or g ani z at io n This do cu m ent is orga nized as follow s: Chapte r 1 This ch.
17 Ty pogra phic Conven tions The follow ing ty p ograph ic conve nti on s are use d in th is public ation . W ARNING A wa rn in g l ists requ ire ment s th at you mus t me et to a vo id pe rsonal inj ury . CA UTION A c au tion p rovid es in formatio n r eq uir ed to avoid losin g d ata o r avoid losing sy stem functio nality .
18 Re la ted I nfo rma t ion Y o u ca n fin d oth e r inf o rm a tion o n HP serv er ha r d ware man agem e nt , Mic ro so f t® Wind o ws ®, a nd di agn os tic support to ol s at the follow i ng W eb sit es . Web S ite fo r HP T e chnical Documen tation: http:// d ocs.
19 Publ ishing Hi story The pu blish ing histor y of th is doc um e n t inclu d es the followi ng ed itions. U pda te s are m ad e to this docu m e nt on an unscheduled as ne eded bas is . The upd a tes con s ist of a complet e replace ment manual and perti nent W eb-bas ed or CD documen tation .
20 HP Encourages Y our Comments HP welc omes yo ur feedb a c k on t hi s publ i cat i on . Addre s s y our comme n ts to edit @pr esskit .rsn.h p.c om an d note that you w ill no t rec eive an im media te repl y .
Chapter 1 21 1 Overview The H P s uperscala ble sx2000 proc essor ch ipset is the new chipset fo r the Superdo me h igh-end p latform. It suppor ts up t o 128 P A-RIS C or Intel Itanium 2 processor s and provides an enter prise server up grade path for the Superdo me line o f syste m s.
Chapter 1 Over vi e w 22 - A new cell board - A n ew system back plane and it’s powe r board - A new I/O backplanes and it ’ s power bo ar d - New I/O - backplane c ables - And the addition of a redundant, hot swap pable c lo ck sourc e .
Chapter 1 Ov ervie w Server H istory and Specifi cations 23 Ser ver His tory and Specificati ons Super dome was intr odu ced as the ne w platfor m architecture for HP high -end se rvers in 2000-200 4. Sup er dome re pr esen ted the fir st coll abo rat ive h ard war e de sig n ef fort be tw een t rad it iona l HP a nd Conv ex tec hnologi es .
Chapter 1 Over vi e w Server Co m ponents 24 Ser ver Componen ts A Supe rdo m e syst em con sist s of the fo llo win g type s of ca bine t ass emb lies: At least one Superdome l eft cabin et . The Superdome cabin et s co nta i n all of the proces so r s , memory , and cor e devic es of the syst em.
Chapter 1 Ov ervie w Server Components 25 When the P A du al -c ore o r the IA dual-c ore proc es sor s are used, the CPU cou nts are dou bled by the use of the dual -die pr oces sors , as supporte d on th e Itanium cell boards. Up to 128 processo rs can be suppo rted.
Chapter 1 Over vi e w P ower System 26 Po w e r S y s t e m The power subsys tem consi sts of th e fol lo win g compo nent s: - 1 or 2 P ower Di stribut ion Component Assembly (PD C A) - 1 Front End P.
Chapter 1 Ov ervie w Po w er System 27 - Inline connector: Mennekes ME532C6-16, 3 -phase, 5-wir e, 32 Am ps , 450/475 V , VDE c ertified, colo r red,IEC309-1, IEC309-2, grounded at 6:00 o'clock.
Chapter 1 Over vi e w Cooli ng System 28 Cooling System The Su perdome has fou r blower s and fiv e I/O fans per cabin et. These co mponents are all h ot-sw ap devi ces . All hav e LEDs in dicati n g the c u rrent s tatus . These LEDs a r e self -en planatio n.
Chapter 1 Ov ervie w Cooli ng System 29 If the failure ca uses a tran sition to N - I/O or ma in fans in a CPU c abinet, the c abinet is im mediately powered off .
Chapter 1 Over vi e w Utili ties Subsyst em 30 Util ities S ubsyste m The S uperdo me u tilitie s subs ystem is com prised of a numbe r of hard w are an d firm w a re c ompo nents loc ated thro ug hout th e Su p erd o m e syste m.
Chapter 1 Ov ervie w Utili ties Subsyst em 31 - Su p p o rts U S B fo r key bo a rd an d m o use at bo ot - Supports VGA du ri ng boot - Enables global shared me mo ry (GSM) - Supp orts PCI 2 .3, PCI-X 1.0, an d PCI-X 2.0 UGUY Ever y cabin e t co nta ins one U GU Y .
Chapter 1 Over vi e w Utili ties Subsyst em 32 - Status LEDs for the SBA cable OL*, the cel l OL*, and the I/O backplane OL* PM3 F u nc ti on al it y The PM3 performs the fol low i n g func tion s : 1) FEPS contr ol an d monitorin g. F or eac h of th e BPSs in th e FEPS .
Chapter 1 Ov ervie w Utili ties Subsyst em 33 -The ability to process and s tore log en tries (chassi s cod es) - Console function s to every partiti on - OL* functions - Vi rtual f r ont panel and s .
Chapter 1 Over vi e w Utili ties Subsyst em 34 HUC B The H UCB, sho wn in Fig ure 1-4, i s t he back plane of th e ut ility su bsystem . It provi d es c able dis tribution for all the utility signals except the cloc ks . It also prov ides the custom er LAN inter face and serial p orts.
Chapter 1 Ov ervie w Backp l ane (Fabr ic) 35 Backpl ane (F abric ) The s ystem backplan e as sembly prov ides the followi ng f unction ality in an sx2000 s ystem: - Interfac es the CLU sub syste m to.
Chapter 1 Over vi e w Backpl ane (F abric) 36 an ad ditional c rossbar in a sec ond ba ckplane for a dual ba ckplane c onfigura tion. T he conn ection is through a high-spe ed cable inter face to the seco nd backp lane. This 12-c able high -spe ed int erfac e replac es the fl ex cable inte r face pr eviously used on the Superdome system.
Chapter 1 Ov ervie w Backp l ane (Fabr ic) 37 Syste m Clo ck Distr i bution The following syst em compon ents rec eive t h e syst em clock are t he ei ght c ell board s that plug into to the bac kplane, the si x XBC cr ossbar swit ch c hips on th e system backpl a ne.
Chapter 1 Over vi e w Backpl ane (F abric) 38 The H SO c onnects to t he syst em bac kplane th rough an HM ZD2X 10 right-an gle recep tacle. sx2000 RC S Module The sx2000 RCS module su ppl ies clocks to the Su perd om e sx2000 back plan e, commu nic ates clock alarm to the RPM, and ac cepts contr o l in put fro m the RPM .
Chapter 1 Ov ervie w Backp l ane (Fabr ic) 39 If on e of the HSOs ou t puts do es not ha v e t he c or re c t a mpl i t ude t hen t h e RCS u se s the other one as t he source of clock s and se nds an alar m sig nal to the RPM in dicat ing wh ich oscillat or failed.
Chapter 1 Over vi e w Backpl ane (F abric) 40 The b ackplan e has two slot s for pow er supply modules . The pow er s upply c onnector for each slot has a 1-bit slot a ddre s s t o i den tify the sl ot . The address bi t for power supply sl ot 0 i s gr ounded.
Chapter 1 Ov ervie w CPUs and Memories 41 CPUs and Me mor ies The cell pro vide s the p roc es sin g and m emor y resou rces requir e d by each sx2000 system config uration.
Chapter 1 Over vi e w CPUs and Memories 42 The remote I/O lin k provi des a self-cor recting , h ig h-s peed communi cat i on pat hwa y between the cell and the I/O subsyste m thr o ugh a pair of cables. Sustain ed I/O bandw idth is 5.5 GBs for a 50 perce nt inbou nd and outb oun d mix, and roug hly 4.
Chapter 1 Ov ervie w CPUs and Memories 43 platfo rms ma y su pport DIMM s ba sed on non m ono lithic (or s tacked) DR AMs, w hich a re inc ompat ible with the sx2000. T here is no su pport f or the u se o f the older SDRAM D IMMs d esigned fo r Sup erdome.
Chapter 1 Over vi e w CPUs and Memories 44 indu stry-sta ndar d DIM M. T his in crease in height allows the DIM M to accomm odate twi ce as m any DRA Ms as an indu stry-st andard DIMM and to p rovide redundant address and contr ol signal c o n tacts not a vailab le on indu str y-sta ndar d DD R2 DI MM s .
Chapter 1 Ov ervie w CPUs and Memories 45 - Cellma p (across cell s) - Link (ac r oss fabrics) Memo ry Ban k Attr ib ute T able The M BAT inte rleaving is d one on a p er -cell bas is be fore th e par tition is re ndezvous ed. The c ell ma p an d fabric inte r le aving are done af ter th e par titio n ha s rende zvo u se d .
Chapter 1 Over vi e w CPUs and Memories 46 Memo ry Er ror Pr ot ectio n All of t he CC cache lin es are pr otected in memor y by an error correction code (ECC). The sx 2 000 memory ECC schem e is sig nific ant ly differ en t from the sx100 0 mem o r y EC C sche me.
Chapter 1 Ov ervie w CPUs and Memories 47 Platform Dependant Hardware The platform depe nden t hardware's (PDH ) includes fun cti onality that is required by bo th sy stem and managemen t fir mware.
Chapter 1 Over vi e w I/O Su bsyst em 48 I/O Subsyste m The sx2000 I/O backplan e (SIOBP) is an update of the sx1000 I/O backp lane, with a new set of chips that increas e the board’s internal ba ndwidth and support th e newer PC I-X 2.
Chapter 1 Ov ervie w I/O S ubsystem 49 SB A Ch ip: CC - t o - R o p e s The SBA c hip communicates with the CC on the cell b oard v i a a pair of h i gh-s peed s eria l uni di re ctional link s known a s H S S or E-links. Eac h un idirectional E-lin k consists o f 20 serial 8b/10b e ncoded different ial data bits operatin g at 2.
Chapter 1 Over vi e w I/O Su bsyst em 50 PC I S lot s F or m axim um per f orma nce and availa bility , ea ch PCI slot is sourc ed by its ow n LBA chip an d is sup ported b y its own por tion o f a hot-plu g controll er . All slots are designed to Revision 2.
Chapter 1 Ov ervie w I/O S ubsystem 51 togeth er 5.V +3 . 3 V auxilar y will be on whene ver AC is applie d. The S I OBP F PGA is respons ible for ensu ring that each volt age is s ta ble befor e enab ling t h e next voltage. The pow er -down se quence is t h e opposi te o f the powe r -up seque nce, tu rning o ff t he 3.
Chapter 1 Over vi e w New Server Cabling 52 New Se rver Cabli ng Most of the Sup erdome cab les remain u nc hanged exc ept three cable s d esigned for the sx 2000 to improve d ata rate and elec trical perfo rmance: n n M-lin k cab le, two types (lengths ) of L-lin k cable, and a c lock cable .
Chapter 1 Ov ervie w New Ser ver Cabli ng 53 Fi gure 1 -1 1 Backplane Cables.
Chapter 1 Over vi e w Fir m ware 54 Fir m w are The newer Inte l Itanium® P rocesso r firmwa re c onsists of ma ny c omponents loosel y c oupl ed by a sin g le framew ork . These comp one nts are individu ally linked bina ry image s that are boun d toge ther at run time.
Chapter 1 Ov ervie w Server Configur ati ons 55 Ser ver Config ur ati ons Refer to the HP Syste m Partitions Guid e (5 990-8170A ) for extensive det ails on the to pic of proper conf i gurations . Al so , an inte r active pr ogram found o n the PC SMS , t itled “S uperdome Par tition s Revisited, ” can be ve r y use f ul .
Chapter 1 Over vi e w Serv e r E rrors 56 Server E rrors T o s upport high availabi lity (HA) , the new ch ipset has inc luded funct ionalit y to d o err or corr ection, detectio n and rec ov e ry .
Chapter 1 Ov ervie w Server Err ors 57 ar e opened between PDs when it is es tablishe d that the PDs are u p and commu nication between the m is open. W hen there is a failur e in GSM, the goal is to clos e the shari ng windows betwee n those two cell s bu t not to af fect sh arin g w i n dows t o ot h er cell s.
Chapter 1 Over vi e w Serv e r E rrors 58 1. Dete cti on is the har dwa re c hec ks t h at reali ze an erro r has occu rre d. 2. Tra nsaction handling mo difies ho w the h ardware treats t he t mansacti on wi t h the de t ected error .
Chapter 2 59 2 Syst em Specificat ions The following specific ations ar e based o n ASHRAE Class 1. Class 1 is a control led computer room envi ronmen t, in which produ cts a re s ubject to c ontro lled tem pera ture an d h umidity ex tremes.
Chapter 2 System Specifications Dime nsio ns and W eights 60 Dimensions a nd W eig hts This se c tio n co nt a ins s erve r comp on ent d im e nsion s and we igh t s for the sys tem . Component D imensions T ab le 2-1 list s the dimen sions for th e cabine t an d compon ents.
Chapter 2 System Specifications Dime nsions and W eigh ts 61 Componen t W eights T ab le 2-3 lists t he ser v e r an d comp onent we i ghts . T able 2-4 li s t s th e wei ght s fo r opti on a l I/O ex pansi on (IOX) cab inets.
Chapter 2 System Specifications Dime nsio ns and W eights 62 Shippi ng D imensi ons an d W eigh ts T ab le 2- 5 list s the dime n sio ns and we igh ts of the Su ppor t Mana gem e nt Sta t io n and a sing le cabine t wi th shi ppi ng p alle t.
Chapter 2 System Specifications Electri cal Specificati ons 63 Elect ric al Spe cifi catio ns The following specific ations ar e based o n ASHRAE Class 1. Class 1 is a control led computer room envi ronmen t, in which produ cts a re s ubject to c ontro lled tem pera ture an d h umidity ex tremes.
Chapter 2 System Specifications Electri cal Specificat i ons 64 NO TE A q ualifie d e lectr ician m ust wi re the PD CA recepta cle to site po we r us ing coppe r wire and in complian ce with a ll local code s . All branch circ uits use d w ith in a com p le x must be conn ected toge the r to form a com mo n gr ou nd .
Chapter 2 System Specifications Electri cal Specificati ons 65 Fi gure 2 -1 PDCA Locations Syst em P ower Require ments T ab le 2-8 and T able 2-9 l ist the a c pow e r requir ements for an H P Inte grity Sup erdome/ sx2000 s ystem. T hese tab les pr ov ide i nformati on to h elp determin e the amount o f ac pow er ne eded for yo u r computer room.
Chapter 2 System Specifications Electri cal Specificat i ons 66 W ARNING Bewa re of sh ock h azar d. W he n con nect ing or rem ovin g inp ut p o wer w iri ng, alw a ys co nnec t th e gr ound wi re first and di scon nect it l as t.
Chapter 2 System Specifications Electri cal Specificati ons 67 I/O Ex p ansion Cabin e t P o wer Co rd s T ab le 2 -1 2 li s t s t he p ow e r cord s for th e I/O ex p a nsi on cab in et .
Chapter 2 System Specifications En vir onmental Requi r ements 68 Envi ronm ent al Requ ir e m en ts This sec tion provid e s th e env iron mental, pow er dissip ati on, nois e emiss ion, and air flow sp ecifica tions. T e mperat ure and H umidi ty Spe cif icatio ns NO TE The values in T able 2-14 meet or exceed all AS HRAE specifi cations .
Chapter 2 System Specifications Envi ronment al Requi rements 69 W ARNING D o not co nnect a 3 80 to 415 V ac supp ly to a 4-wi re PDCA. Th is is a safet y hazard and wil l re sult in da mag e to t he p ro duct . L ine -to-l ine or p ha se-t o-pha se voltag e measured a t 380 to 415 V ac must a lways be connected using a 5-wir e P DCA.
Chapter 2 System Specifications En vir onmental Requi r ements 70 b . Thes e nu mbe rs are val id only for the specifi c c o nf igur a tio ns sho w n. An y up g rade s may re quire a change to t he break er size. A 5-wir e sourc e utilize s a 4-pole breaker , and a 4-wir e source utilize s a 3-pole breaker .
Chapter 2 System Specifications Envi ronment al Requi rements 71 b . Thes e nu mbe rs are val id only for the specifi c c o nf igur a tio ns sho w n. An y up g rade s may re quire a change to t he break er size. A 5-wir e sourc e utilize s a 4-pole breaker , and a 4-wir e source utilize s a 3-pole breaker .
Chapter 2 System Specifications En vir onmental Requi r ements 72 Acou stic Noi se Spe cif icatio n The a coustic noise s pecific ations ar e as fo llows: • 8.
Chapter 2 System Specifications Envi ronment al Requi rements 73 Airflow HP Integ rity Supe rdom e /sx2000 systems r eq uir e the cabinet air intak e temper ature to be betwe en 15 ο C an d 32 ο C (59 ο F and 89.6 ο F) a t 2900 CF M. Figur e 2-2 illus trate s the locatio n of the inlet and o utl et air duct s on a single cab ine t.
Chapter 2 System Specifications En vir onmental Requi r ements 74 T a b le 2-17 P hysical Environm ental Sp ecifications Co ndit ion Vo l t a g e 200–240 V ac Airf low , Nom inal b Airf low , Maximum at 32 o C a, b a. Derate maxim um dry bulb tem pe rature 1o C/300 m above 900 m .
Chapter 3 75 3 Ins talling the System This chap ter des cribe s ins tallati on of an HP Integ rit y Superdo m e/ sx200 0 system. Insta llers mus t have receive d adequ ate train ing, be kn owled geable abo ut th e produ ct, a nd have a good overall backgrou nd in elec troni cs and cu stomer h ardw are inst allati on.
Chapter 3 Installing the System Int roduction 76 In tr odu c tio n The in s tr uc t io ns i n th is c ha pt er a re wr i tt en for C us t omer Su ppor t Cons ult a nts (CS C) who are ex pe r ien c ed a t installin g co mplex sys tems. It provi des d etails ab out each ste p in the insta llation p r ocess.
Chapter 3 Installing the System Unpac king and I nspect i ng the System 77 Un p a c k i n g a nd I ns p ec t in g th e Sys te m This section desc rib es what to do before unpacki n g the serv er and how to unpac k the sys te m itself .
Chapter 3 Installing the System Unpac king and I nspect i ng the System 78 Inspecti ng the Ship ping Contai ners fo r Dama ge HP shipp ing conta in ers a re des igned to protec t their contents u nder normal shipping con ditions . After the equi pment arrives at t he c ustomer si te , carefull y ins pect each c arton for signs of shipping damage.
Chapter 3 Installing the System Unpac king and I nspect i ng the System 79 F igure 3 -1 Normal T ilt Indicator F igure 3 -2 Abnormal T ilt Indicator NO TE If the tilt indicator shows that an abnormal shippi n g condit io n has occurred, write “po ssi b l e hidden damage” on the bill of ladin g and keep the packagin g .
Chapter 3 Installing the System Unpac king and I nspect i ng the System 80 Ins pect i on Pr ecau tion s • Wh en the shipment a rriv es, c hec k each c ontain er agains t th e carrier' s bill of lading . Insp ect the exter ior of each c ontai ner immedi atel y for mishan dling or dama ge du ring transit .
Chapter 3 Installing the System Unpac king and I nspect i ng the System 81 Unp ack ing th e Cabi net W ARNING U se three pe o p le to unpack t he cabinet saf ely . HP re c omm e n d s re m o vin g the car db o ard sh i ppi ng co n tain er b efo r e movi n g the ca b ine t i nt o the co m p u ter room.
Chapter 3 Installing the System Unpac king and I nspect i ng the System 82 Fi gure 3 -4 Cutt ing P olystrap Bands Step 3. Li ft the cardboa rd corrug ated top cap off of the shipping box. Step 4. Remove the corr ugated s leeves sur roundi n g the c a binet.
Chapter 3 Installing the System Unpac king and I nspect i ng the System 83 F igure 3 -5 R emoving the R amps from the P allet Ramps.
Chapter 3 Installing the System Unpac king and I nspect i ng the System 84 Step 7. Rem ove the plastic an ti- stat ic bag by lifting it stra igh t up off the cab ine t. If the cab inet or any compon ents a re damag ed, fol low t he cla ims pro c edure.
Chapter 3 Installing the System Unpac king and I nspect i ng the System 85 Step 3. V e ri fy th at th e I/O cha s sis mo un ting sc rews are i n p l ace and se cure ( Fi gure 3-7) . Inspe ct all com pon e nts for signs of shiftin g during sh ipm ent o r any signs of dam age.
Chapter 3 Installing the System Unpac king and I nspect i ng the System 86 Figure 3 -8 Ship ping Strap Loca tio n Step 2. Remove the pall et mounting b racket s and pads on t he si de of th e pall et whe r e the r amp slot s ar e locat ed (Fig ure 3-9).
Chapter 3 Installing the System Unpac king and I nspect i ng the System 87 WA R N I N G Do not r emove the bo lts on t he mounti ng bracket s that a ttach t o t h e pa l let. These bo lts prev en t the cabi n et fr o m rolling of f the back o f the pallet.
Chapter 3 Installing the System Unpac king and I nspect i ng the System 88 Step 5. Care f ul ly ro ll the ca b ine t d ow n th e ra mp (Fig ur e 3- 1 1) . F igure 3-11 Roll in g the C abine t Down the Ra mp Step 6. Unpack any oth er cabinets that were shipp ed .
Chapter 3 Installing the System Unpac king and I nspect i ng the System 89 Ret urni ng Equipm en t If the equ ip m ent is f ound to be dam ag ed, use the or igin al p ack ing mat er ial to re pa ckage the cab inet for ship m ent. If the p ack ing ma ter ial is not availab le, contact the local HP Sale s and Su p por t Off ice regar ding shi pment.
Chapter 3 Installing the System Unpac king and I nspect i ng the System 90 W ARNING D o not attempt to push the loade d cabinet up the ramp onto th e pallet. Three peo ple are r equired to p u sh the cabinet u p t he ramp and positio n it on the pa llet.
Chapter 3 Installing the System Setting U p the S ystem 91 Setti ng Up the System After a si te h as b een pr epare d, the system h as be en unpac ked, and a ll co mpon ents h ave been i nspected, the system can be p repared f or boot ing .
Chapter 3 Installing the System Setting U p the S yst em 92 This car dbo ard p rote c ts the ho us ing baffle dur ing shipping. If it is not rem ov e d, the f ans wil l not wor k proper ly . Fi gure 3 -13 Removing Protective Cardboard fro m the Housing NO TE Double -check that th e prot ectiv e cardboa rd h as been remove d.
Chapter 3 Installing the System Setting U p the S ystem 93 Step 4. Using the h andle s on the hou sing labeled B l ower 0 Blower 1 , part n umber A5 201-62030, alig n the edg e of the housing ov er th.
Chapter 3 Installing the System Setting U p the S yst em 94 Step 7. Ti ghten the thu m bsc rews at the front of each b lower . Step 8. If r equ ir ed, insta ll ho usi ngs on any othe r ca binets that we re sh ip p ed wit h the sys te m .
Chapter 3 Installing the System Setting U p the S ystem 95 Step 3. Attach th e sk in wi t hou t th e l ap jo i nt (Front) over the top bracket and under the bottom brack e t and gen t ly sli de the sk i n into posit i on . Fi gure 3 -18 Attaching the Front Side Skins Step 4.
Chapter 3 Installing the System Setting U p the S yst em 96 Step 1. Pl ace the side bez el sligh t l y above the blower hou sin g frame . Fi gure 3 -19 Attaching the Side Bezels Step 2. Align the lo wer bezel tabs t o th e slot s in the side pan els. Step 3.
Chapter 3 Installing the System Setting U p the S ystem 97 Step 6. T o secu re the s ide be zels to the side s kins, attach the bl ower bracket lo cks (HP pa rt num ber A5201-00268) to the front and back blowe rs using a T -20 driver . Ther e are t wo blower bracke t loc ks on th e fron t blowers and two on the rea r .
Chapter 3 Installing the System Setting U p the S yst em 98 NO TE The proc edure in t his s ection req uires two peo ple and mu s t be perfor med with the f ront met al ch ass i s door open. T o install the fron t door ass embl y: Step 1. Open t he door , u nsnap the s c reen, an d remove al l th e filter s held in pl ace with V elcro .
Chapter 3 Installing the System Setting U p the S ystem 99 F igure 3 -2 2 Installin g the Upper F ront Door Assembl y Step 6. F eed the g roun ding s trap throug h the d oor an d a ttach it to the ca binet. Step 7. Insert the shou ld er studs on the upper door bezel into the holes on the front door metal c has sis .
Chapter 3 Installing the System Setting U p the S yst em 100 Fi gure 3 -2 3 Installing the Rear Blower Bezel Step 3. Align the bezel o ver th e nu ts th at are attach e d to the brack et at the rear of th e cabine t. Step 4. Usin g a T -20 dr iver , ti ghten th e two c aptive sc rews on the l ower flange of the bez e l.
Chapter 3 Installing the System Setting U p the S ystem 101 Fi gure 3 -2 4 I nstall ing the Front Blower Bez el Step 3. Align the bezel o ver th e nu ts th at are attach e d to the br acket at the fron t of the ca bine t. Step 4. Usin g a T -20 dr iver , ti ghten th e two c aptive sc rews on the l ower flange of the bez e l.
Chapter 3 Installing the System Setting U p the S yst em 102 • Required method of g roundin g is to connec t the green power c ord safet y ground to the s ite g r ound poi nt. Thi s i s ac com pli sh ed th ro ug h th e p o we r cor d re cep ta cle w ir ing.
Chapter 3 Installing the System Setting U p the S ystem 103 In stall ing and V erif ying t he PDC A All sys tems a re deliv ered w ith th e appr opriate cable plu g for o ption s 6 an d 7 (Fig ure 3-25 o n page 104). Chec k the vol tage s at t h e recept ac le pr ior to pl ugging in t he PDC A plug.
Chapter 3 Installing the System Setting U p the S yst em 104 Fi gure 3 -2 5 PDCA Assembly for Options 6 and 7 Figure 3-26 A 4-Wire Co nnect or L2 L1 L3 PE.
Chapter 3 Installing the System Setting U p the S ystem 105 Figure 3-27 A 5-Wire Co nnect or Use the foll owin g pr ocedur e to install the PDC A : W ARNING Ma ke sure t he ci rcui t break er on t h e PDCA is OFF . Step 1. Re m o ve the re ar PDC A b ez el by re mo v ing th e f our re t aini ng screw s .
Chapter 3 Installing the System Setting U p the S yst em 106 Figure 3 -28 I nst a lling the P DCA Step 4. Using a T -20 drive r , attac h the fou r sc rews that ho ld the PDCA in plac e. Step 5. If requ ir ed, r ep eat ste p 2 th roug h step 4 for th e se con d P D CA.
Chapter 3 Installing the System Setting U p the S ystem 107 Figure 3 -29 Check ing P DCA T e st P oin ts (5-Wire ) T able 3-3 4- and 5-Wire V oltage Ranges 4- Wire 5-Wi re L2 to L3: 200-24 0 V L1 to N: 2 00-240 V L2 to L1: 200-24 0 V L2 to N: 2 00-240 V L1 to L3: 200-24 0 V L3 to N: 2 00-240 V N t o Gro u nd : a a.
Chapter 3 Installing the System Setting U p the S yst em 108 Vo l t a g e C h e c k The v oltag e ch eck en sures that all phas es (an d neutral, for i nternat ional systems ) are wired c orrec tly f or the cabi net and tha t the AC input voltag e is withi n lim its .
Chapter 3 Installing the System Setting U p the S ystem 109 WA R N I N G SHOCK HAZARD Ris k of sho ck ha zard whi l e tes t ing p rim ar y po wer . Use pr op erly in sulated pr o bes . Be su re to r eplace access c ove r wh e n finished testing pr imary power .
Chapter 3 Installing the System Setting U p the S yst em 110 Removi ng the EMI P ane ls Rem ove the front and back elec tr oma gnetic inter ferenc e (EM I) pa nels to acc ess p orts and to visu ally c he ck whether components are in pl ace and the LEDs are properly ill uminated when power is applied to the sys tem.
Chapter 3 Installing the System Setting U p the S ystem 111 Fi gure 3 -3 3 R emovin g the Back EMI P anel Step 4. Use the handle p rovid ed to gently remo v e th e EMI p an el an d set it aside. Conn ecting the C able s The I/O cables a re at tac h ed and tied i nside t he cabi n et.
Chapter 3 Installing the System Setting U p the S yst em 112 Figure 3 -34 Cab le La beling Ro ut ing the I / O C a b les Routin g the cab les i s a si gnific ant t ask in the i nsta llation p rocess. Ef ficient cable routin g is imp ortant not only for the ini tial ins tallation , bu t also to aid in f utu re se rv ice call s.
Chapter 3 Installing the System Setting U p the S ystem 113 Fi gure 3 -35 Routing I / O Cables Use t he fol lowing procedure a nd guidel ines t o rou te c ables t hro ugh the cable gro omer at the b ottom rear of the cab inet. Step 1. Remove the cabl e acce ss plat e at the bot tom of the groomer .
Chapter 3 Installing the System Setting U p the S yst em 114 Step 3. Conn ect the mana gement p r ocesso r cabl es last. Step 4. Reatt ach t he cab le ac c ess plat e at the b ottom of the c able groome r . Step 5. Reatt a c h the cabl e gro omer kic k pl ate a t the back of the cabinet.
Chapter 3 Installing the System Inst alling t he Support Management Station 115 Insta lling the Support Manag ement St ation The Sup port Ma nag emen t Sta tio n (SMS) shi ps in one of t wo w ays: rack-mou n ted in t he ca binet or s ep ara t el y in b oxes for install ation in th e field .
Chapter 3 Installing the System Confi gurin g the Event Informati on T ools 116 Con f igu rin g t he Even t Informat ion T ools Ther e are t hree tool s in cluded i n the Ev ent Informati on T ool s (EIT) bundle fo r the Su pport Management Statio n (SMS).
Chapter 3 Installing the System T urning On Housekeeping P o wer 117 T urnin g On Ho usekeepi ng P owe r Use t he fol lowing procedure t o turn o n housekeepi ng power to th e system: Step 1. V erify tha t the a c voltag e at the in put so urce is with in speci ficati on s for each cabi net be ing installe d.
Chapter 3 Installing the System T urning On Housekeeping P o wer 118 Figure 3 -36 F ront P a nel wit h Housek eeping (HKP ) P o wer O n and Pre s ent LE Ds Step 5. Examine the bulk power s upply (BPS) LEDs (F ig u re 3 - 37). When on, t h e bre a kers on th e PD C A dis t ri bu t e ac pow er t o t he BPSs .
Chapter 3 Installing the System T urning On Housekeeping P o wer 119 Fig ur e 3 -3 7 B P S L E Ds BPS LEDs.
Chapter 3 Installing the System Connect ing t h e MP to the Customer LA N 120 Connect ing the MP to t he Custo m er LA N This section di scus s es ho w to co n nect, set u p, an d ver ify t h e management process or (MP) t o the customer LAN .
Chapter 3 Installing the System Connect ing the M P to the Customer LAN 121 Setti ng the Cu stom er IP Addr ess NO TE The default IP addres s for the cust omer LAN port on the MP is 192.168.1. 1. T o set th e customer LAN IP address: Step 1. Fr om the MP Co m mand Menu prompt ( MP:CM> ), en ter lc (for LAN con figur ation ).
Chapter 3 Installing the System Connect ing t h e MP to the Customer LA N 122 This is the host na me for the cu stom er LA N . Y ou can us e any nam e you lik e. The nam e can be up to 64 charac ters lon g , and can incl ude al phanumerics , dash (-), u nder s c ore (_), period (.
Chapter 3 Installing the System Booting and V erifying t he System 123 Bo oti ng a nd V e r if y in g th e S yst e m After ins talling the sys te m , ver if y that the proper hard ware is ins talle d and bo ot ed. This section de scribes h ow to powe r on th e cab inet a nd bo ot and tes t eac h parti tion.
Chapter 3 Installing the System Booting and V erifyi ng the Syst em 124 The M P Main Menu appears a s shown in Figure 3-42. F igu re 3 - 42 Main MP Menu Step 3. Repea t the first two s teps fo r each par t ition r equ ired. Step 4. In o n e window bring u p the c ommand prompt by enter ing cm at the MP > prompt as shown in Figure 3-43.
Chapter 3 Installing the System Booting and V erifying t he System 125 F igure 3-44 MP Virt ual Fron t P anel Step 6. Fr om the VFP menu, ent er s t o select the whole s ystem, o r enter the pa rtition number to s elect a particul ar p artition. An o utput simi lar to that sho wn in Figu re 3 -45 ap pear s .
Chapter 3 Installing the System Booting and V erifyi ng the Syst em 126 Fi gure 3 -4 6 MP Console Option P ow ering On t he Sy stem 4 8 V Su pply Step 1. Swi tch on the 4 8V su pply from eac h cabi net fro n t panel. If the complex has an IOX c abinet, pow e r on this cabinet fir st.
Chapter 3 Installing the System Booting and V erifying t he System 127 Boot i ng t h e HP I ntegrity Su p erd ome/sx20 00 to a EFI Shell Af te r p o w e rin g o n or us in g the C M bo comm an d , all.
Chapter 3 Installing the System Booting and V erifyi ng the Syst em 128 F igure 3 - 48 EFI Shell Prompt NO TE If autoboot is enabled for an nP artiti on, you must inter r u pt it to stop the boot process at the EFI f irmw are con sole .
Chapter 3 Installing the System Booting and V erifying t he System 129 Figure 3-49 H P Integ rity Su perdo me/sx 2000 P ar titions a t System Firmw are Con sole V erify ing t he System Use the foll owin g procedu r e to verify the system: Step 1. From th e CM > prompt, ent er ps t o observe the powe r stat u s .
Chapter 3 Installing the System Booting and V erifyi ng the Syst em 130 Step 2. At the S elect Dev ice : pr ompt, enter b then the ca bin et number t o ch eck the po wer sta tus of t he cabinet. Obse rve Po wer Sw itc h: on and Pow er: en abled as show n in Figur e 3-51 .
Chapter 3 Installing the System Booting and V erifying t he System 131 IMPOR T ANT An aste r isk (*) appear s in the MP colum n only for cabinet 0; th at is, the cabinet cont a inin g the MP .
Chapter 3 Installing the System Runnin g JET So f tware 132 Running JET Software Ensur e that the network diagnos t i c is enabled at the MP prompt; MP:CM>nd . T his nee d s t o b e pe rf o r m ed i n order to run scan and to do firmware updates to the syste m.
Chapter 3 Installing the System Offline Diagno stic En vir onment (ODE) 133 Offl ine Diag nostic Env ironment (O DE) Now that scan has been run, yo u can run all the appropr iate diagnost ics for this syst em. S ee the ap propr i a te diagn ostic d ocum enta tion f o r i nstructio ns.
Chapter 3 Installing the System Attachi ng the Rear Kick Plates 134 Atta ching t he Re ar Kick Plat es Kick plates prote c t cables from acc ide ntal ly being disco nn ected or dama ge d and add an attrac tive cosm eti c touch to th e cabinet. Y ou nee d to atta ch thre e metal k ick plat es to the bottom re ar of the cabi ne t.
Chapter 3 Installing the System Per forming a Vi sual In spection and Completing the I nstallation 135 P erf orming a Vis ual Insp ecti on and Com pl eting t he In stal lation After booting the system , ca refully insp ect it and reinstall the EMI pan els.
Chapter 3 Installing the System Per fo r mi ng a V isual Inspecti on and Completing t he I nstallati on 136 Step 4. Reinst all the front E MI p ane l (Fig ur e 3 -55) . Fi gure 3 -5 5 Front EMI P anel Flange and Cabinet Holes a. Hook the flange at the lower corners of the EM I pane l into the holes on the cabinet.
Chapter 3 Installing the System Per forming a Vi sual In spection and Completing the I nstallation 137 a. Ali gn th e lip ins ide the c abinet wi th the lip on the EM I pan e l. Fi gure 3-56 Re inst al ling the Back EMI P an el b. Push th e EMI panel up a nd in.
Chapter 3 Installing the System Conduct i ng a Post I nstall at ion Check 138 Conducti ng a P ost Instal l ation Check After th e system has been i nstalled i n a c omputer room an d verifie d, conduct the post i nstallatio n chec k.
Chapter 4 139 4 Bo oting and S h utti ng Down the Ope r at ing Sys tem This ch a pt er pr es ents proc edu res for b o ot ing an oper ati n g sy stem (O S ) on an nP a rt i tion (h ardw a r e partition) and pr oc edures for s hutting do w n the OS .
Chapter 4 Booting and Shutting D own the O perating Syst em Operati ng Systems Supported on Cell-bas ed HP Servers 140 Oper at ing Sys tems Suppo r ted on C e ll-bas ed HP Ser v ers HP supports n P artitions on ce ll-based HP 9000 se rvers an d cell-bas ed HP I n tegrity servers.
Chapter 4 Booting and Shutting D own t he Operating System System Boot Configu r at io n Opti ons 141 System B oot C onfigur atio n O ptions This section b ri efly di s cusses t he system boot option s you can config ure on cel l-ba sed ser v ers .
Chapter 4 Booting and Shutting D own the O perating Syst em System B oot Configur at ion Options 142 Man ager u tility ) to manag e boot optio ns fo r your syst em d isk. The Open VMS I64 B oot M ana ger ( BOOT_O PTI ONS.COM ) uti lity is a menu-bas ed util ity a nd is e asier to use than EF I.
Chapter 4 Booting and Shutting D own t he Operating System System Boot Configu r at io n Opti ons 143 T o set th e ACPI co n figurat ion valu e, iss ue the a cpicon fig value command at the EFI Sh el l, where value is eith er defa ult or windo ws .
Chapter 4 Booting and Shutting D own the O perating Syst em System B oot Configur at ion Options 144 CA UTION An nPar titio n on an HP Inte g rity ser ver cann ot boot H P-UX vir tu al partit ion s wh en in nPars boot m ode.
Chapter 4 Booting and Shutting D own t he Operating System Booti ng and Shutt ing D own HP- UX 145 Bo ot in g an d Sh u tt in g Do wn HP- UX This section pr esents p rocedu res f or boot ing an d shut ting dow n HP-UX on cell -bas ed HP se rve rs an d a proc edu re f or addi n g HP-UX t o the b oo t opti ons list o n HP Integ rity server s.
Chapter 4 Booting and Shutting D own the O perating Syst em Booti ng and Shut t i ng Do wn H P-UX 146 T o add a n HP-UX b oot option when lo g ged in t o HP-UX, use the se tboot command. F or det ails , ref e r t o th e s e tboot (1M) manpage. Step 1.
Chapter 4 Booting and Shutting D own t he Operating System Booti ng and Shutt ing D own HP- UX 147 CA UTION A CPI Configu r ation fo r HP-UX Must Be de fault On ce ll-base d HP Inte gr ity ser vers, to boot th e H P-U X O S , an nPartiti on AC PI confi gur atio n valu e mu st be set to def ault .
Chapter 4 Booting and Shutting D own the O perating Syst em Booti ng and Shut t i ng Do wn H P-UX 148 HP-UX Booti n g (EFI Shell ) Fr om the EFI Shell e n vironment, to boot HP-UX on a device fi rst access the E FI System Par tition f or the root device (for exampl e fs0 : ) an d then ente r H PUX t o initiate the load e r .
Chapter 4 Booting and Shutting D own t he Operating System Booti ng and Shutt ing D own HP- UX 149 T o b o ot the HP-UX OS , do not type anyth i ng durin g the 10- secon d period giv en for stoppi ng at the HPUX.
Chapter 4 Booting and Shutting D own the O perating Syst em Booti ng and Shut t i ng Do wn H P-UX 150 Step 4. Boot to t he HP-UX Boot Loader prompt ( HPUX> ) b y pressing an y key wi thin th e 10 sec onds g iven for inter rupting the HP- UX b o ot p rocess.
Chapter 4 Booting and Shutting D own t he Operating System Booti ng and Shutt ing D own HP- UX 151 Step 1. Acce s s the EFI Shell enviro nment for the nP artition on which you w a nt to b oot H P-UX in L VM-mainten ance mo de. Log in to the man ageme nt pro cesso r , a nd en ter CO to acc e ss the C o nsole list.
Chapter 4 Booting and Shutting D own the O perating Syst em Booti ng and Shut t i ng Do wn H P-UX 152 Log in to the management pr ocessor for the ser v er and u se the Cons ole menu t o ac cess t he syst em con sole. Acces sing the cons ole thr ough the MP enables you to mai ntain con sole acce ss to the sy stem af ter HP- UX h as sh ut dow n.
Chapter 4 Booting and Shutting D own t he Operating System Booti ng and Shutt ing D own HP O penVMS I64 153 Boo ting and Shutting Down HP OpenVMS I6 4 This sect ion presents pr ocedur es fo r boot i ng and shutt i ng dow n HP OpenVMS I64 on cell - ba s ed HP Int egri t y ser vers an d procedures for a dding H P OpenVMS to t he boot options l ist.
Chapter 4 Booting and Shutting D own the O perating Syst em Booti ng and Shut t i ng Do wn H P OpenVMS I64 154 T o confi gure b ooting o n Fibre Channel dev ices , you must u se th e OpenVMS I64 B oot Manager uti lity ( BOO T_O PTIONS .
Chapter 4 Booting and Shutting D own t he Operating System Booti ng and Shutt ing D own HP O penVMS I64 155 T o exit th e EFI environ m ent, pr ess ^B ( Control +B ); th is e xits th e nPartition conso le a nd retur ns to the mana geme nt proc es s or Main Menu.
Chapter 4 Booting and Shutting D own the O perating Syst em Booti ng and Shut t i ng Do wn H P OpenVMS I64 156 Boot ing HP OpenVMS (EF I Shell) Fr om the EFI Shell e n vironment, to b oot HP O penVMS .
Chapter 4 Booting and Shutting D own t he Operating System Booti ng and Shutt ing D own HP O penVMS I64 157 Log in to the management proce ssor (MP) for the server and use the Console menu to access the system c onsole .
Chapter 4 Booting and Shutting D own the O perating Syst em Booti ng and Shut t i ng Do w n Micr osof t Wind ows 158 Bo oti ng an d Sh ut ting Do wn Mi cros of t Win do ws This section pr esents p r o.
Chapter 4 Booting and Shutting D own t he Operating System Booti ng and Shu tting Do w n Micr osoft Windo ws 159 Addi ng a Micros o f t Wi nd ows Boo t Opt io n This proce dur e adds the Micros oft Win d ow s item to the boot option s li st. Step 1. Acce s s the EFI Shell enviro nment.
Chapter 4 Booting and Shutting D own the O perating Syst em Booti ng and Shut t i ng Do w n Micr osof t Wind ows 160 Step 6. Press Q to q uit the NVRBO OT utility , an d exi t the con sole an d man agement proces sor inter faces if you a re fi nished using them.
Chapter 4 Booting and Shutting D own t he Operating System Booti ng and Shu tting Do w n Micr osoft Windo ws 161 Step 3. Press Enter t o ini tiat e bo ot ing using the c hosen boot opt i on. Step 4. When W indows be gins l oading, wait for the Spec ial Administ ration Console (SAC) t o be come available.
Chapter 4 Booting and Shutting D own the O perating Syst em Booti ng and Shut t i ng Do w n Micr osof t Wind ows 162 /a Abort a s ystem s h utdown. /t xxx S e t th e timeo ut pe riod be fore shutdo wn to xxx sec onds. T h e tim eo ut p eri od can ran ge from 0–6 00, with a defau lt of 30.
Chapter 4 Booting and Shutting D own t he Operating System Booting and Shutt ing Do wn Li nux 163 Boot ing and Shutting Down Linux This section pr esents p r ocedures f or boot ing an d shutting down the Li n ux OS on c ell -based HP Integ rity ser vers an d a procedur e for adding Linu x to t he boot options l ist.
Chapter 4 Booting and Shutting D own the O perating Syst em Booti ng and Shut t i ng Do wn Linux 164 See “Boot Opti ons List” on p age 1 41 for addit io nal infor m ation abo ut saving, restoring, and creatin g boot option s. NO TE On HP Integ r ity s ervers , the O S instal ler automati c ally adds an entry to the boot options l ist.
Chapter 4 Booting and Shutting D own t he Operating System Booting and Shutt ing Do wn Li nux 165 Booti ng Red H a t Enterprise Linux Y ou can boot t h e Red Hat En terprise Li nux OS on HP Integ rit y servers usi ng ei t h e r of the methods des c ribed in this se ction .
Chapter 4 Booting and Shutting D own the O perating Syst em Booti ng and Shut t i ng Do wn Linux 166 Fr om the system console , se lec t the EFI Shell entr y fro m the EFI Boot Ma nag er men u t o a c c ess t h e shell. Step 2. Acce s s the EFI Sy stem P artiti on for th e Red Hat Enterpr ise Li nux boo t device .
Chapter 4 Booting and Shutting D own t he Operating System Booting and Shutt ing Do wn Li nux 167 Refer t o the procedure “ Booting SuSE Linux En terprise S erver (EF I Shell)” on page 167 for det ail s .
Chapter 4 Booting and Shutting D own the O perating Syst em Booti ng and Shut t i ng Do wn Linux 168 Use the PE command at th e mana gement pr oces s or Command Men u to man u ally pow er on or power off server hardwa r e, as needed . -r Reboot af ter shut down.
Appendi x A 169 A sx2000 LED s.
A ppe ndi x A sx2000 LEDs 170 Ta b l e A - 1 F r o n t P a n e l L E D s LE D Driv en By St at e Mea ni ng 48V G ood PM O n (green ) 48V is go od HKP Good PM On (g reen ) Housekeepi ng is good.
Appendi x A sx2000 LEDs 171 T able A-2 P ow er an d OL* LEDs LED Location Dri ven By Sta te M ean ing Cell Power Chas sis besid e cell, and on cell Cell LP M On G reen HKP , PWR_G OOD Cell Attent ion .
A ppe ndi x A sx2000 LEDs 172 Fig ur e A -1 U ti lit i es LE D s Hot swap osc illator s (HSO) System Back plane RPM On Green On Y e llow HSO Su pply runn ing HSO clo c k f ault T able A-3 OL* LED Stat.
Appendi x A sx2000 LEDs 173 Fi gure A -2 PDH Status A label will be place d on the outsid e of the SDCP B Fram e to indic ated PD H Sta tus, DC/ DC C o nver ter fault s that shu tdown the sx2000 ce ll, and loss of DC/DC Co nverter Redun dancy . Figure A-2 il lustrates the label and tabl e A-4 descr ibes each LED .
A ppe ndi x A sx2000 LEDs 174.
Appendi x B 175 B Management Process or Commands This Appendix summa rizes the Managemen t Processor commands . Notice t h at in the examples h erein, MP i s us ed as the command prompt. The term Guardi an Serv i ce Pr oces s or has been changed t o Managemen t Proc essor , but s ome c ode alr eady writ t en uses the old term.
A ppe ndi x B Management Processor C om mands MP Co m m an d : BO 176 MP Comma n d : BO BO - Bo ot partition • A ccess level— Single PD user • Scope— parti tion This comma nd b oots th e s pecifie d par tition.
Appendi x B Management P r ocessor Commands MP Co m ma n d : CA 177 MP Comma n d : CA CA - Co n figure Asynchro nous & Modem P arameters • A cc ess le ve l— Op e rat or • Scope—Comple x This command all ows t h e ope r ator t o configu re t he loca l an d remot e consol e ports .
A ppe ndi x B Management Processor C om mands MP Co m m an d : CC 178 MP Comma n d : CC CC - Co mp lex Configuratio n • A cc e ss leve l— Adm inis trator • Scope—Comple x This com ma n d per form s an ini tial out of th e box comp le x conf igu rat ion.
Appendi x B Management P r ocessor Commands MP C ommand: C P 179 MP Comma n d : CP CP - Cel l s Assi gned by P ar tition • A cc ess L ev e l - Single Partition Use r •S c o p e - C o m p l e x The cp com m an d displays a tab le of cells assi gned to par titi ons and arrang e d by cabinet s.
A ppe ndi x B Management Processor C om mands MP C omma nd: DA TE 180 MP Comma n d : DA TE D A T E C omm and - S et Da te and Tim e. • A cc e ss leve l— Adm inis trator • Scope—Comple x This command cha nges the val ue of the real time cl oc k chip on t he MP .
Appendi x B Management P r ocessor Commands MP Co m ma n d : DC 181 MP Comma n d : DC DC - Defaul t Config u ration • A cc ess le ve l— Adm inis tratrix • Scope—Comple x This comm and r esets som e or al l of the config uratio n para met ers to their def ault v alues.
A ppe ndi x B Management Processor C om mands MP Co m m an d : DF 182 MP Comma n d : DF DF - Disp l a y F R UI D • A cc ess le ve l— Single Partition U se r • Scope—Comple x This com m an d dis plays the F R UID da ta of the sp e cified FR U .
Appendi x B Management P r ocessor Commands MP Co mmand: D I 183 MP Comma n d : DI DI - Disco nnect Remote or L AN Console • A cc ess le ve l— Op e rat or • Scope—Comple x Thi s c ommand initi a tes separat e remote c onso le or LAN consol e disconnec t se quences .
A ppe ndi x B Management Processor C om mands MP Co m m an d : DL 184 MP Comma n d : DL DL - Di sable LAN Access • A cc e ss leve l— Adm inis trator • Scope—Comple x This comman d disa bles Telnet LA N ac cess .
Appendi x B Management P r ocessor Commands MP C omma n d: EL 185 MP Comma n d: EL DL - E n able LAN Access • A cc e ss leve l— Adm inis trator • Scope—Comple x This comm an d enables T e ln et LAN acc ess. Example B-10 EL Command MP:CM> el Enable telnet acces s? (Y/[N]) y -> Tel net a ccess enabled.
A ppe ndi x B Management Processor C om mands MP Co m m an d : HE 186 MP Comma nd : HE HE - Hel p Menu •S c o p e — N / A • A ccess level— Single PD user This comman d dis plays a list of all MP comman ds ava ilable to the level of the MP access (Admin istrato r , Opera tor , or Sin gle PD user).
Appendi x B Management P r ocessor Commands MP C ommand: H E 187 Exam pl e B - 1 1 H E Com m an d.
A ppe ndi x B Management Processor C om mands MP C omma nd: ID 188 MP Comma nd : ID ID - Co nfigu re Complex Identif ication • A cc ess le ve l— Op e rat or • Scope—Comple x This comma nd c onfig ures th e c ompl e x ide ntifica tion informa tion.
Appendi x B Management P r ocessor Commands MP Co mmand: I O 189 MP Comma nd : IO IO - Di s pla y Connectivity Between Cells and I/O • A cc ess le ve l— Sinf le Partition User • Scope—Comple x This comman d dis plays a ma pping of th e co nnectivi ty be tween cells an d I/O.
A ppe ndi x B Management Processor C om mands MP C omma nd: IT 190 MP Comma nd : IT IT - V ie w / C o n f ig ure I na c t i vi ty Tim eo ut Par am et e r s • A cc ess le ve l— Op e rat or • Scope—Comple x This com m an d se ts the two inac tiv ity time -o uts.
Appendi x B Management P r ocessor Commands MP Comm a nd: LC 191 MP Comma nd : LC LC - L AN C onfi gurat ion • A cc e ss leve l— Adm inis trator • Scope—Comple x This command di s plays and modi fie s the LAN confi guratio ns. The I P addres s, Hostname , Subnet mas k, and Gate w ay addres s can be modified wit h this command.
A ppe ndi x B Management Processor C om mands MP C omma nd: LS 192 MP Comma nd : LS LS - LA N Sta tus • A cc ess le ve l— Single Partition U se r • Scope—Comple x Th is co mm a n d dis p lay s al l p a ra m e t e r s and cu rr en t conn e cti o n sta tu s of th e L A N inte rf a c e.
Appendi x B Management P r ocessor Commands MP Co mmand: MA 193 MP Comma nd : MA MA - Mai n M enu • A cc ess le ve l— Single Partition U se r •S c o p e — N / A The c omma nd ta kes the sp ecific us er fr om the Comm and menu and return s the u ser to the main menu.
A ppe ndi x B Management Processor C om mands MP Co m m an d : ND 194 MP Comma n d : ND ND - Netw ork Dia gno stics • A cc e ss leve l— Adm inis trator • Scope—Comple x This comm an d enable s/d isabl es network diagn ostics.
Appendi x B Management P r ocessor Commands MP C ommand: PD 195 MP Comma n d: PD PD - S et Default P arti tion • A cc ess le ve l— Op e rat or • Scope—Comple x This com m an d se ts the d efau lt p arti tion. If a defau lt partit io n alread y exis ts, then thi s com m and ove rr id es the prev io usl y defin ed parti tion .
A ppe ndi x B Management Processor C om mands MP C omma nd: PE 196 MP Comma n d: PE PE - Po wer Entity • A cc ess le ve l— Op e rat or • Scope—Comple x This com ma n d tur ns po we r on/ o ff to the sp ecifie d entity . If ther e is a defa ult pa r titio n define d then th e target ed en ti t y must be a member of that partition .
Appendi x B Management P r ocessor Commands MP C omma nd: PE 197 I - IO Chassis P - P ar tition Se le ct De v ice : p # Na me --- ---- 0) Partition 0 1) Partition 1 2) Partition 2 3) Partition 3 Select a pa rt ition nu mbe r: 0 The pow er state is OFF for part itio n 0.
A ppe ndi x B Management Processor C om mands MP C omma nd: PS 198 MP Comma n d: PS PS - P owe r a nd Con figur at i on St at us • A cc ess le ve l— Single Partition U se r • Scope— Cabinet This comman d dis plays the status of th e spec ified h ardware.
Appendi x B Management P r ocessor Commands MP C omma nd: PS 199 Example B -20 PS Command.
A ppe ndi x B Management Processor C om mands MP Co m m an d : RE 200 MP Comma n d : RE RE - Reset E n tity • A cc ess le ve l— Op e rat or • Scope—Comple x This command reset s the specif ied ent ity . Care should be exer cised when resetti ng entiti es because of t he side ef fects .
Appendi x B Management P r ocessor Commands MP Comm a nd: RL 201 MP Comma n d : RL RL - Re - key Compl ex Pr ofil e Lo ck • A cc ess le ve l— Op e rat or • Scope—Comple x This co mma nd r e-keys th e c omplex profi l e l oc k.
A ppe ndi x B Management Processor C om mands MP Co m m an d : RR 202 MP Comma n d : RR RR - Reset P a rtition f or Re-configuration • A cc ess le ve l— Single Partition U se r • Scope— P ar tition This c ommand resets the spe cified part ition bu t does not a utom atically boot it .
Appendi x B Management P r ocessor Commands MP C ommand: R S 203 MP Comma n d : RS RS - Reset P artition • A ccess level— Single PD user • Scope— P ar tition This c omma nd resets and boot s the specifie d part ition. Th e utilit y system r esets e ach cell that is a membe r of the spe cifie d p arti tion.
A ppe ndi x B Management Processor C om mands MP C omma nd: SA 204 MP Comma nd : SA SA - Set Access P arame ters • A cc e ss leve l— Adm inis trator • Scope—Comple x This com ma n d modif ie s th e enab le m ent of int erfaces includin g telne t, SSH , mode m , netw or k diagno sti cs , IPMI LAN , web console , etc .
Appendi x B Management P r ocessor Commands MP C ommand: SO 205 MP Comma nd : SO SO - Security Options and Access Control Configuration • A cc e ss leve l— Adm inis trator • Scope—Comple x This com m an d mod ifie s th e sec ur ity o p tio ns an d acce ss contr ol to the MP handle r .
A ppe ndi x B Management Processor C om mands MP Com mand : SYSREV 206 MP Comma n d: SY SREV SYSREV - Display S y stem and Manageab ility Firmw are Revisions • A cc ess le ve l— Single Partition U se r • Scope—Comple x This com m an d will d isplay the f irmwar e rev isio ns of all of the e ntit ie s in the com p lex.
Appendi x B Management P r ocessor Commands MP Comm a nd: TC 207 MP Comma nd : TC TC - T OC Parti t io n • A cc ess le ve l— Single Partition U se r • Scope— P ar tition This com ma n d tran sfe rs th e con tr ol (TOC ) of the sp ecifie d partitio n .
A ppe ndi x B Management Processor C om mands MP C omma nd: TE 208 MP Comma nd : TE TE - T ell • A cc ess le ve l— Single Partition U se r • Scope—Comple x This comman d tre ats all character s follow ing th e TE as a m essage that is br oadcast w hen the <CR> is pressed.
Appendi x B Management P r ocessor Commands MP C ommand: V M 209 MP Comma n d: VM VM - V oltag e Margin • A cc ess le ve l— Single Partition U se r • Scope— Cabinet The com m and adju sts the volt age of all ma rg inab le sup plie s with in a ran ge of +/- 5% No res e t is re quir e d fo r t he com ma nd to be com e effe ct ive.
A ppe ndi x B Management Processor C om mands MP C omma nd: W HO 210 MP Comma nd : WH O WHO - Display L ist of Connected Users • A cc ess le ve l— Single Partition U se r • Scope—Comple x This command displa ys the login name of the c on n ec t ed con so le cl i ent user and the port on which they are connec ted.
Appendi x B Management P r ocessor Commands MP C ommand: XD 211 MP Comma nd : XD XD - Diag nostic and Re set of M P • A cc ess le ve l— Op e rat or • Scope—Comple x This comman d tests certain funct ions o f the SBC and SBCH boards.
A ppe ndi x B Management Processor C om mands MP C omma nd: XD 212.
Appendi x C 213 C P owering the System O n and O ff This a ppen dix provides procedures t o s h ut dow n and bring u p a s y s tem. Chose th e a ppr opr ia t e section for the desir ed tas k.
A ppe ndi x C P owering the S y stem On and Off Shuttin g Down t h e System 214 Shutting Down the Sy stem Use t his pr oc edure w h enever t h e syst em must be s hut down. Che c king S ystem Config urat ion T o ch ec k th e curre n t system co n fi g ur atio n, in pr e pa ra t i on for shutdown, per form the following proce du r e: Step 1.
Appendi x C P owering the System On and O f f Shutti ng Down the System 215 F igure C-2 Main MP Me nu Step 3. In voke t he Com m a nd Menu by en teri ng cm at the MP prompt. Step 4. Make sure that no one else is usi ng the system by enter i ng who at th e CM prompt.
A ppe ndi x C P owering the S y stem On and Off Shuttin g Down t h e System 216 Step 5. Read the an d s ave the c urrent sys tem configurat ion by enterin g cp and the CM pr ompt. Cabinet and partit io n info rma tion sho u ld be displaye d as in Fig ur e C- 4.
Appendi x C P owering the System On and O f f Shutti ng Down the System 217 Step 8. Fr om the VFP , enter s t o select th e whol e system or enter the par tition number to select a particul ar partitio n. Y ou s hould see a n output similar to that s hown in F igure C-6.
A ppe ndi x C P owering the S y stem On and Off Shuttin g Down t h e System 218 • Win dows: Lo g in as Admi nis t rator . F r om the Special Admin is tration Console ( S AC> prompt) en te r cm d to start a new com m an d pro m pt. Pre ss Esc+T ab to s witch to th e chan nel for the comma nd pr ompt and log in.
Appendi x C P owering the System On and O f f Shutti ng Down the System 219 Step 6. Read the Cell P DH Con tro ller status to de term in e if the part itio n is at B IB. Fi gure C -9 Using t h e de -s Command Step 7. Repeat step 1 thro ugh step 6 for each partition.
A ppe ndi x C P owering the S y stem On and Off Shuttin g Down t h e System 220 Step 1. Fr om the Comman d Menu, en t er pe (Fig ure C-10 ). F igure C-10 P ower Enti ty Command Step 2. Enter t he number of the cabinet to power off . In Figure C-1 0, the number is 0.
Appendi x C P owering the System On and O f f Shutti ng Down the System 221 Step 5. Enter b a t t he s e le c t de vice pr ompt t o select en s ur e t h at t h e c a b i net p ower is o ff. The outpu t should be similar to that in Figure C-12. The Power switch sho uld be on , but the P ower sho uld be no t enable d .
A ppe ndi x C P owering the S y stem On and Off T urning On Housekeeping P o wer 222 T urnin g On Ho usekeepi ng P owe r Use t he fol lowing procedure t o turn o n housekeepi ng power to th e system: Step 1. V erify tha t the a c voltag e at the in put so urce is with in speci ficati on s for each cabi net be ing installe d.
Appendi x C P owering the System On and O f f T urning On Housekeeping P o wer 223 Fi gure C -1 3 Front P anel Display with Housekeeping (HKP) P ower On, and Pr es ent LEDs Step 5. Examine the bulk power suppply (BPS) LEDs (Figure C-14) . When on , the breakers on the PDC A distrib ute power to the BPSs .
A ppe ndi x C P owering the S y stem On and Off T urning On Housekeeping P o wer 224 Fig ur e C -14 B PS L E Ds BPS LEDs.
Appendi x C P owering the System On and O f f Po w ering On t he System Using the p e C ommand 225 P ow e ring On t he Sy stem Us ing th e pe Co m m an d This section de scribes h ow to p ower o n the s ystem. U se the follow ing pr oc edures whenev er t he s ystem n eeds to b e power ed on.
A ppe ndi x C P owering the S y stem On and Off P owering On the System Using the pe Command 226 Step 4. From th e CM > prompt, ent er ps t o observ e the powe r stat u s . The status screen sho wn in Fig ure C-16 appears . F igure C -16 P ower Status F irst Window Step 5.
Appendi x D 227 D Te m p l a t e s This app endix contains blan k floor pl an grid s and eq uipm e nt tem plate s. Combine the ne c essar y numb er of floo r plan g rid sheets to c reate a scaled v ersion of the computer room f loor plan.
A ppe ndi x D Te m p l a t e s Te m p l a t e s 228 Te m p l a t e s This sect ion co ntains blan k floor plan grid s and equip ment temp lates. Com bine the ne cessa ry numb er of flo or plan grid s heets t o create a scal ed v er sion of the comput er ro om floor p lan.
Appendi x D Te m p l a t e s Te m p l a t e s 229 Figure D-3 on page 231 illus trate s the ove rall dim ens ions requ ired for an SD64 complex . Fi gure D -1 C able Cutouts and Caster Location s.
A ppe ndi x D Te m p l a t e s Te m p l a t e s 230 Figure D -2 SD1 6 and S D32 S p ace R equirem ents.
Appendi x D Te m p l a t e s Te m p l a t e s 231 Figure D -3 SD64 S pace Re quirement s E q u i p m e n t Fo o t p r i n t Te m p l a t e s Equip ment f ootprin t templ ates are drawn t o the same scale as t he floor plan grid (1/4 inch = 1 foot ).
A ppe ndi x D Te m p l a t e s Te m p l a t e s 232 NO TE Photoc opying t ypically c hanges t he sc a le of copied dr awing s. If any templ ates are copi ed, t h en all temp lates and floo r plan gr ids m ust also be copie d . Co m p u t er Room L ayout Pl an Use the foll owin g pr ocedu r e to crea te a computer room la y out plan : Step 1.
Appendi x D Te m p l a t e s Te m p l a t e s 233 F igure D -4 Computer Fl oor T emplate.
A ppe ndi x D Te m p l a t e s Te m p l a t e s 234 F igure D -5 Computer Fl oor T emplate.
Appendi x D Te m p l a t e s Te m p l a t e s 235 F igure D -6 Computer Fl oor T emplate.
A ppe ndi x D Te m p l a t e s Te m p l a t e s 236 F igure D -7 Computer Fl oor T emplate.
Appendi x D Te m p l a t e s Te m p l a t e s 237 F igure D -8 Computer Fl oor T emplate.
A ppe ndi x D Te m p l a t e s Te m p l a t e s 238 Fi gure D -9 SD32 and SD64, and I/O Expansion Cabinet T emplates.
Appendi x D Te m p l a t e s Te m p l a t e s 239 Fi gure D -10 SD32 and SD64, and I/O Expansion Cabinet T emplates.
A ppe ndi x D Te m p l a t e s Te m p l a t e s 240 Fi gure D -11 SD32 and SD64, and I/O Expansion Cabinet T emplates.
Appendi x D Te m p l a t e s Te m p l a t e s 241 Fi gure D -12 SD32 and SD64, and I/O Expansion Cabinet T emplates.
A ppe ndi x D Te m p l a t e s Te m p l a t e s 242 Fi gure D -13 SD32 and SD64, and I/O Expansion Cabinet T emplates.
Appendi x D Te m p l a t e s Te m p l a t e s 243 Fi gure D -14 SD32 and SD64, and I/O Expansion Cabinet T emplates.
A ppe ndi x D Te m p l a t e s Te m p l a t e s 244.
245 Index A ac power volt age ch ec k , 108 wi ri ng che c k , 10 1 ac po w e r ve r i f ica t ion 4-wire P DCA , 103 5-wire P DCA , 103 AC0 P resent LED , 118 , 223 AC1 P resent LED , 118 , 223 acous.
Index 246 inte r fer ence communi c at ions , 76 in vent ory ch ec k , 77 IP addre s s defaul t values , 121 LAN conf igurat ion scr een , 121 sett i ng pri v ate and c u stomer LAN , 121 J JTAG utili.
Index 247 W wiring che ck , 101 wrist str ap usag e , 76.
An important point after buying a device HP (Hewlett-Packard) A9834-9001B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HP (Hewlett-Packard) A9834-9001B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HP (Hewlett-Packard) A9834-9001B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HP (Hewlett-Packard) A9834-9001B you will learn all the available features of the product, as well as information on its operation. The information that you get HP (Hewlett-Packard) A9834-9001B will certainly help you make a decision on the purchase.
If you already are a holder of HP (Hewlett-Packard) A9834-9001B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HP (Hewlett-Packard) A9834-9001B.
However, one of the most important roles played by the user manual is to help in solving problems with HP (Hewlett-Packard) A9834-9001B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HP (Hewlett-Packard) A9834-9001B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
